diff --git a/Gemfile b/Gemfile index 2b50a8fa4..86e8efad8 100644 --- a/Gemfile +++ b/Gemfile @@ -2,7 +2,7 @@ source 'https://rubygems.org' ruby '3.2.4' # Standard rails -gem 'rails', '~> 7.2.2.1' +gem 'rails', '~> 8.0.1' gem 'puma', '~> 6.6' # roar gem 'sdoc', '~> 2.6.0', group: :doc gem 'nokogiri', '>= 1.13.4' @@ -73,7 +73,7 @@ gem 'rails-html-sanitizer', '>= 1.4.3' group :development do gem 'i18n-tasks', '~> 1.0.14' # check and clean i18n keys - gem 'rails-i18n', '~> 7.0' # dependency of i18n-tasks + gem 'rails-i18n', '~> 8.0' # dependency of i18n-tasks gem 'shog' # makes rails s output color! gem 'listen', '>= 3.0.5' gem 'rubocop', require: false # our code style / linting system diff --git a/Gemfile.lock b/Gemfile.lock index f49170089..2d88d3fc0 100644 --- a/Gemfile.lock +++ b/Gemfile.lock @@ -2,58 +2,57 @@ GEM remote: https://rubygems.org/ specs: Ascii85 (1.1.0) - actioncable (7.2.2.1) - actionpack (= 7.2.2.1) - activesupport (= 7.2.2.1) + actioncable (8.0.1) + actionpack (= 8.0.1) + activesupport (= 8.0.1) nio4r (~> 2.0) websocket-driver (>= 0.6.1) zeitwerk (~> 2.6) - actionmailbox (7.2.2.1) - actionpack (= 7.2.2.1) - activejob (= 7.2.2.1) - activerecord (= 7.2.2.1) - activestorage (= 7.2.2.1) - activesupport (= 7.2.2.1) + actionmailbox (8.0.1) + actionpack (= 8.0.1) + activejob (= 8.0.1) + activerecord (= 8.0.1) + activestorage (= 8.0.1) + activesupport (= 8.0.1) mail (>= 2.8.0) - actionmailer (7.2.2.1) - actionpack (= 7.2.2.1) - actionview (= 7.2.2.1) - activejob (= 7.2.2.1) - activesupport (= 7.2.2.1) + actionmailer (8.0.1) + actionpack (= 8.0.1) + actionview (= 8.0.1) + activejob (= 8.0.1) + activesupport (= 8.0.1) mail (>= 2.8.0) rails-dom-testing (~> 2.2) - actionpack (7.2.2.1) - actionview (= 7.2.2.1) - activesupport (= 7.2.2.1) + actionpack (8.0.1) + actionview (= 8.0.1) + activesupport (= 8.0.1) nokogiri (>= 1.8.5) - racc - rack (>= 2.2.4, < 3.2) + rack (>= 2.2.4) rack-session (>= 1.0.1) rack-test (>= 0.6.3) rails-dom-testing (~> 2.2) rails-html-sanitizer (~> 1.6) useragent (~> 0.16) - actiontext (7.2.2.1) - actionpack (= 7.2.2.1) - activerecord (= 7.2.2.1) - activestorage (= 7.2.2.1) - activesupport (= 7.2.2.1) + actiontext (8.0.1) + actionpack (= 8.0.1) + activerecord (= 8.0.1) + activestorage (= 8.0.1) + activesupport (= 8.0.1) globalid (>= 0.6.0) nokogiri (>= 1.8.5) - actionview (7.2.2.1) - activesupport (= 7.2.2.1) + actionview (8.0.1) + activesupport (= 8.0.1) builder (~> 3.1) erubi (~> 1.11) rails-dom-testing (~> 2.2) rails-html-sanitizer (~> 1.6) - activejob (7.2.2.1) - activesupport (= 7.2.2.1) + activejob (8.0.1) + activesupport (= 8.0.1) globalid (>= 0.3.6) - activemodel (7.2.2.1) - activesupport (= 7.2.2.1) - activerecord (7.2.2.1) - activemodel (= 7.2.2.1) - activesupport (= 7.2.2.1) + activemodel (8.0.1) + activesupport (= 8.0.1) + activerecord (8.0.1) + activemodel (= 8.0.1) + activesupport (= 8.0.1) timeout (>= 0.4.0) activerecord-session_store (2.1.0) actionpack (>= 6.1) @@ -62,13 +61,13 @@ GEM multi_json (~> 1.11, >= 1.11.2) rack (>= 2.0.8, < 4) railties (>= 6.1) - activestorage (7.2.2.1) - actionpack (= 7.2.2.1) - activejob (= 7.2.2.1) - activerecord (= 7.2.2.1) - activesupport (= 7.2.2.1) + activestorage (8.0.1) + actionpack (= 8.0.1) + activejob (= 8.0.1) + activerecord (= 8.0.1) + activesupport (= 8.0.1) marcel (~> 1.0) - activesupport (7.2.2.1) + activesupport (8.0.1) base64 benchmark (>= 0.3) bigdecimal @@ -80,6 +79,7 @@ GEM minitest (>= 5.1) securerandom (>= 0.3) tzinfo (~> 2.0, >= 2.0.5) + uri (>= 0.13.1) acts_as_tenant (0.6.1) rails (>= 5.2) request_store (>= 1.0.5) @@ -334,20 +334,20 @@ GEM rack (>= 1.3) rackup (2.2.1) rack (>= 3) - rails (7.2.2.1) - actioncable (= 7.2.2.1) - actionmailbox (= 7.2.2.1) - actionmailer (= 7.2.2.1) - actionpack (= 7.2.2.1) - actiontext (= 7.2.2.1) - actionview (= 7.2.2.1) - activejob (= 7.2.2.1) - activemodel (= 7.2.2.1) - activerecord (= 7.2.2.1) - activestorage (= 7.2.2.1) - activesupport (= 7.2.2.1) + rails (8.0.1) + actioncable (= 8.0.1) + actionmailbox (= 8.0.1) + actionmailer (= 8.0.1) + actionpack (= 8.0.1) + actiontext (= 8.0.1) + actionview (= 8.0.1) + activejob (= 8.0.1) + activemodel (= 8.0.1) + activerecord (= 8.0.1) + activestorage (= 8.0.1) + activesupport (= 8.0.1) bundler (>= 1.15.0) - railties (= 7.2.2.1) + railties (= 8.0.1) rails-dom-testing (2.2.0) activesupport (>= 5.0.0) minitest @@ -355,12 +355,12 @@ GEM rails-html-sanitizer (1.6.2) loofah (~> 2.21) nokogiri (>= 1.15.7, != 1.16.7, != 1.16.6, != 1.16.5, != 1.16.4, != 1.16.3, != 1.16.2, != 1.16.1, != 1.16.0.rc1, != 1.16.0) - rails-i18n (7.0.10) + rails-i18n (8.0.1) i18n (>= 0.7, < 2) - railties (>= 6.0.0, < 8) - railties (7.2.2.1) - actionpack (= 7.2.2.1) - activesupport (= 7.2.2.1) + railties (>= 8.0.0, < 9) + railties (8.0.1) + actionpack (= 8.0.1) + activesupport (= 8.0.1) irb (~> 1.13) rackup (>= 1.0.0) rake (>= 12.2) @@ -534,9 +534,9 @@ DEPENDENCIES puma (~> 6.6) rack-attack (~> 6.7.0) rack-test (>= 0.6.3) - rails (~> 7.2.2.1) + rails (~> 8.0.1) rails-html-sanitizer (>= 1.4.3) - rails-i18n (~> 7.0) + rails-i18n (~> 8.0) render_async (~> 2.1) rexml rubocop diff --git a/bin/dev b/bin/dev index a1104a50b..5f91c2054 100755 --- a/bin/dev +++ b/bin/dev @@ -1,9 +1,2 @@ -#!/usr/bin/env bash - -if ! command -v foreman &> /dev/null -then - echo "Installing foreman..." - gem install foreman -fi - -foreman start -f Procfile.dev "$@" +#!/usr/bin/env ruby +exec "./bin/rails", "server", *ARGV diff --git a/bin/rubocop b/bin/rubocop new file mode 100755 index 000000000..40330c0ff --- /dev/null +++ b/bin/rubocop @@ -0,0 +1,8 @@ +#!/usr/bin/env ruby +require "rubygems" +require "bundler/setup" + +# explicit rubocop config increases performance slightly while avoiding config confusion. +ARGV.unshift("--config", File.expand_path("../.rubocop.yml", __dir__)) + +load Gem.bin_path("rubocop", "rubocop") diff --git a/bin/setup b/bin/setup index ec47b79b3..be3db3c0d 100755 --- a/bin/setup +++ b/bin/setup @@ -1,11 +1,10 @@ #!/usr/bin/env ruby require "fileutils" -# path to your application root. APP_ROOT = File.expand_path("..", __dir__) def system!(*args) - system(*args) || abort("\n== Command #{args} failed ==") + system(*args, exception: true) end FileUtils.chdir APP_ROOT do @@ -14,7 +13,6 @@ FileUtils.chdir APP_ROOT do # Add necessary setup steps to this file. puts "== Installing dependencies ==" - system! "gem install bundler --conservative" system("bundle check") || system!("bundle install") # puts "\n== Copying sample files ==" @@ -28,6 +26,9 @@ FileUtils.chdir APP_ROOT do puts "\n== Removing old logs and tempfiles ==" system! "bin/rails log:clear tmp:clear" - puts "\n== Restarting application server ==" - system! "bin/rails restart" + unless ARGV.include?("--skip-server") + puts "\n== Starting development server ==" + STDOUT.flush # flush the output before exec(2) so that it displays + exec "bin/dev" + end end diff --git a/config/application.rb b/config/application.rb index a2df3461a..84d2b691c 100644 --- a/config/application.rb +++ b/config/application.rb @@ -16,14 +16,13 @@ # require "action_text/engine" require "action_view/railtie" # require "action_cable/engine" -require "sprockets/railtie" require "rails/test_unit/railtie" # Require the gems listed in Gemfile, including any gems # you've limited to :test, :development, or :production. Bundler.require(*Rails.groups) -module DARIA +module Daria class Application < Rails::Application # Initialize configuration defaults for originally generated Rails version. config.load_defaults 7.0 @@ -36,6 +35,11 @@ class Application < Rails::Application # Run "rake -D time" for a list of tasks for finding time zone names. Default is UTC. config.time_zone = 'Eastern Time (US & Canada)' # this is bad. Should hardset to UTC and find some way to programmatically determine timezone based on user. + # Please, add to the `ignore` list any other `lib` subdirectories that do + # not contain `.rb` files, or that should not be reloaded or eager loaded. + # Common ones are `templates`, `generators`, or `middleware`, for example. + config.autoload_lib(ignore: %w[assets tasks]) + # The default locale is :en and all translations from config/locales/*.rb,yml are auto loaded. # config.i18n.load_path += Dir[Rails.root.join('my', 'locales', '*.{rb,yml}').to_s] # config.i18n.default_locale = :de diff --git a/config/environments/development.rb b/config/environments/development.rb index ea05999b7..6c26b9ee0 100644 --- a/config/environments/development.rb +++ b/config/environments/development.rb @@ -3,69 +3,69 @@ Rails.application.configure do # Settings specified here will take precedence over those in config/application.rb. - # In the development environment your application's code is reloaded any time - # it changes. This slows down response time but is perfect for development - # since you don't have to restart the web server when you make code changes. - config.cache_classes = false + # Make code changes take effect immediately without server restart. + config.enable_reloading = true # Do not eager load code on boot. config.eager_load = false # Show full error reports. - config.consider_all_requests_local = false + config.consider_all_requests_local = true - # Enable server timing + # Enable server timing. config.server_timing = true - # Enable/disable caching. By default caching is disabled. - # Run rails dev:cache to toggle caching. + # Enable/disable Action Controller caching. By default Action Controller caching is disabled. + # Run rails dev:cache to toggle Action Controller caching. if Rails.root.join("tmp/caching-dev.txt").exist? config.action_controller.perform_caching = true config.action_controller.enable_fragment_cache_logging = true - - config.cache_store = :memory_store - config.public_file_server.headers = { - "Cache-Control" => "public, max-age=#{2.days.to_i}" - } + config.public_file_server.headers = { "cache-control" => "public, max-age=#{2.days.to_i}" } else config.action_controller.perform_caching = false - - config.cache_store = :null_store end + # Change to :null_store to avoid any caching. + config.cache_store = :memory_store + # Don't care if the mailer can't send. config.action_mailer.raise_delivery_errors = false + # Make template changes take effect immediately. config.action_mailer.perform_caching = false + # Set localhost to be used by links generated in mailer templates. + config.action_mailer.default_url_options = { host: "localhost", port: 3000 } + # Print deprecation notices to the Rails logger. config.active_support.deprecation = :log - # Raise exceptions for disallowed deprecations. - config.active_support.disallowed_deprecation = :raise - - # Tell Active Support which deprecation messages to disallow. - config.active_support.disallowed_deprecation_warnings = [] - # Raise an error on page load if there are pending migrations. config.active_record.migration_error = :page_load # Highlight code that triggered database queries in logs. config.active_record.verbose_query_logs = true - # Suppress logger output for asset requests. - config.assets.quiet = true + # Append comments with runtime information tags to SQL queries in logs. + config.active_record.query_log_tags_enabled = true + + # Highlight code that enqueued background job in logs. + config.active_job.verbose_enqueue_logs = true # Raises error for missing translations. # config.i18n.raise_on_missing_translations = true # Annotate rendered view with file names. - # config.action_view.annotate_rendered_view_with_filenames = true + config.action_view.annotate_rendered_view_with_filenames = true - # Uncomment if you wish to allow Action Cable access from any origin. - # config.action_cable.disable_request_forgery_protection = true + # Raise error when a before_action's only/except options reference missing actions. + config.action_controller.raise_on_missing_callback_actions = true - # CUSTOM STUFF STARTS HERE + # Apply autocorrection by RuboCop to files generated by `bin/rails generate`. + # config.generators.apply_rubocop_autocorrect_after_generate! + + # CUSTOM + config.active_support.disallowed_deprecation = :raise # To allow usage of lvh.me, a tunnelling service, in development for multitenancy. config.hosts = nil diff --git a/config/environments/production.rb b/config/environments/production.rb index dd2cf748e..a7ec882b5 100644 --- a/config/environments/production.rb +++ b/config/environments/production.rb @@ -4,91 +4,92 @@ # Settings specified here will take precedence over those in config/application.rb. # Code is not reloaded between requests. - config.cache_classes = true + config.enable_reloading = false - # Eager load code on boot. This eager loads most of Rails and - # your application in memory, allowing both threaded web servers - # and those relying on copy on write to perform better. - # Rake tasks automatically ignore this option for performance. + # Eager load code on boot for better performance and memory savings (ignored by Rake tasks). config.eager_load = true - # Full error reports are disabled and caching is turned on. - config.consider_all_requests_local = false - config.action_controller.perform_caching = true - - # Ensures that a master key has been made available in either ENV["RAILS_MASTER_KEY"] - # or in config/master.key. This key is used to decrypt credentials (and other encrypted files). - # config.require_master_key = true - - # Disable serving static files from the `/public` folder by default since - # Apache or NGINX already handles this. - config.public_file_server.enabled = ENV["RAILS_SERVE_STATIC_FILES"].present? + # Full error reports are disabled. + config.consider_all_requests_local = false - # Compress CSS using a preprocessor. - # config.assets.css_compressor = :sass + # Turn on fragment caching in view templates. + config.action_controller.perform_caching = true - # Do not fallback to assets pipeline if a precompiled asset is missed. - config.assets.compile = false + # Cache assets for far-future expiry since they are all digest stamped. + config.public_file_server.headers = { "cache-control" => "public, max-age=#{1.year.to_i}" } # Enable serving of images, stylesheets, and JavaScripts from an asset server. # config.asset_host = "http://assets.example.com" - # Specifies the header that your server uses for sending files. - # config.action_dispatch.x_sendfile_header = "X-Sendfile" # for Apache - # config.action_dispatch.x_sendfile_header = "X-Accel-Redirect" # for NGINX + # Assume all access to the app is happening through a SSL-terminating reverse proxy. + config.assume_ssl = true # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies. config.force_ssl = true - # Include generic and useful information about system operation, but avoid logging too much - # information to avoid inadvertent exposure of personally identifiable information (PII). - config.log_level = :info + # Skip http-to-https redirect for the default health check endpoint. + # config.ssl_options = { redirect: { exclude: ->(request) { request.path == "/up" } } } - # Prepend all log lines with the following tags. + # Log to STDOUT with the current request id as a default log tag. config.log_tags = [ :request_id ] + config.logger = ActiveSupport::TaggedLogging.logger(STDOUT) - # Use a different cache store in production. - # config.cache_store = :mem_cache_store + # Change to "debug" to log everything (including potentially personally-identifiable information!) + config.log_level = ENV.fetch("RAILS_LOG_LEVEL", "info") - # Use a real queuing backend for Active Job (and separate queues per environment). - # config.active_job.queue_adapter = :resque - # config.active_job.queue_name_prefix = "dcaf_case_management_production" + # Prevent health checks from clogging up the logs. + config.silence_healthcheck_path = "/up" - config.action_mailer.perform_caching = false + # Don't log any deprecations. + config.active_support.report_deprecations = false + + # Replace the default in-process memory cache store with a durable alternative. + # config.cache_store = :mem_cache_store + + # Replace the default in-process and non-durable queuing backend for Active Job. + # config.active_job.queue_adapter = :resque # Ignore bad email addresses and do not raise email delivery errors. # Set this to true and configure the email server for immediate delivery to raise delivery errors. # config.action_mailer.raise_delivery_errors = false - config.action_mailer.default_url_options = { host: ENV['SITE_URL'] } + + # Set host to be used by links generated in mailer templates. + # config.action_mailer.default_url_options = { host: "example.com" } # Set in custom + + # Specify outgoing SMTP server. Remember to add smtp/* credentials via rails credentials:edit. + # config.action_mailer.smtp_settings = { + # user_name: Rails.application.credentials.dig(:smtp, :user_name), + # password: Rails.application.credentials.dig(:smtp, :password), + # address: "smtp.example.com", + # port: 587, + # authentication: :plain + # } # Enable locale fallbacks for I18n (makes lookups for any locale fall back to # the I18n.default_locale when a translation cannot be found). config.i18n.fallbacks = true - # Don't log any deprecations. - config.active_support.report_deprecations = false - - # Use default logging formatter so that PID and timestamp are not suppressed. - config.log_formatter = ::Logger::Formatter.new - - # Use a different logger for distributed setups. - # require "syslog/logger" - # config.logger = ActiveSupport::TaggedLogging.new(Syslog::Logger.new "app-name") - - if ENV["RAILS_LOG_TO_STDOUT"].present? - logger = ActiveSupport::Logger.new(STDOUT) - logger.formatter = config.log_formatter - config.logger = ActiveSupport::TaggedLogging.new(logger) - end - # Do not dump schema after migrations. config.active_record.dump_schema_after_migration = false - # CUSTOM STUFF STARTS HERE - # Prevent host header injection + # Only use :id for inspections in production. + config.active_record.attributes_for_inspect = [ :id ] + + # Enable DNS rebinding protection and other `Host` header attacks. + # config.hosts = [ + # "example.com", # Allow requests from example.com + # /.*\.example\.com/ # Allow requests from subdomains like `www.example.com` + # ] + # + # Skip DNS rebinding protection for the default health check endpoint. + # config.host_authorization = { exclude: ->(request) { request.path == "/up" } } + + # CUSTOM + config.require_master_key = true + config.public_file_server.enabled = ENV["RAILS_SERVE_STATIC_FILES"].present? + config.action_mailer.perform_caching = false + config.action_mailer.default_url_options = { host: ENV['SITE_URL'] } config.action_controller.default_url_options = { host: ENV['SITE_URL'] } config.hosts << ".#{ENV['SITE_URL']}" - - # Enable serving of images, stylesheets, and JavaScripts from an asset server. config.action_controller.asset_host = ENV['ASSET_SITE_URL'] || ENV['SITE_URL'] end diff --git a/config/environments/test.rb b/config/environments/test.rb index 6294b2b10..bedfcbc40 100644 --- a/config/environments/test.rb +++ b/config/environments/test.rb @@ -7,74 +7,58 @@ require_dependency 'acts_as_tenant/test_tenant_middleware' Rails.application.configure do - config.after_initialize do - Bullet.enable = true - Bullet.bullet_logger = true - Bullet.raise = true # raise an error if n+1 query occurs - Bullet.add_safelist type: :unused_eager_loading, class_name: "CallListEntry", association: :user - end - # Settings specified here will take precedence over those in config/application.rb. - config.cache_classes = true + # While tests run files are not watched, reloading is not necessary. + config.enable_reloading = false - # Eager loading loads your whole application. When running a single test locally, - # this probably isn't necessary. It's a good idea to do in a continuous integration - # system, or in some way before deploying your code. + # Eager loading loads your entire application. When running a single test locally, + # this is usually not necessary, and can slow down your test suite. However, it's + # recommended that you enable it in continuous integration systems to ensure eager + # loading is working properly before deploying your code. config.eager_load = ENV["CI"].present? - # Configure public file server for tests with Cache-Control for performance. - config.public_file_server.enabled = true - config.public_file_server.headers = { - "Cache-Control" => "public, max-age=#{1.hour.to_i}" - } - - # Set test tenant in current thread when running tests - config.middleware.use ActsAsTenant::TestTenantMiddleware + # Configure public file server for tests with cache-control for performance. + config.public_file_server.headers = { "cache-control" => "public, max-age=3600" } - # Show full error reports and disable caching. - config.consider_all_requests_local = true - config.action_controller.perform_caching = false + # Show full error reports. + config.consider_all_requests_local = true config.cache_store = :null_store - # Raise exceptions instead of rendering exception templates. - config.action_dispatch.show_exceptions = false + # Render exception templates for rescuable exceptions and raise for other exceptions. + config.action_dispatch.show_exceptions = :rescuable # Disable request forgery protection in test environment. config.action_controller.allow_forgery_protection = false - config.action_mailer.perform_caching = false - # Tell Action Mailer not to deliver emails to the real world. # The :test delivery method accumulates sent emails in the # ActionMailer::Base.deliveries array. config.action_mailer.delivery_method = :test + # Set host to be used by links generated in mailer templates. + # config.action_mailer.default_url_options = { host: "example.com" } # Custom override + # Print deprecation notices to the stderr. config.active_support.deprecation = :stderr - # Raise exceptions for disallowed deprecations. - config.active_support.disallowed_deprecation = :raise - - # Tell Active Support which deprecation messages to disallow. - config.active_support.disallowed_deprecation_warnings = [] - # Raises error for missing translations. # config.i18n.raise_on_missing_translations = true # Annotate rendered view with file names. # config.action_view.annotate_rendered_view_with_filenames = true - # CUSTOM STUFF STARTS HERE - # Yell about n+1 queries. + # Raise error when a before_action's only/except options reference missing actions. + config.action_controller.raise_on_missing_callback_actions = true + + # CUSTOM config.after_initialize do Bullet.enable = true Bullet.bullet_logger = true Bullet.raise = true # raise an error if n+1 query occurs + Bullet.add_safelist type: :unused_eager_loading, class_name: "CallListEntry", association: :user end - - # Set mailer default url to localhost in tests. + config.middleware.use ActsAsTenant::TestTenantMiddleware config.action_mailer.default_url_options = { :host => 'localhost' } - # all the encryptable attributes will be encrypted according to the encryption settings defined in the model config.active_record.encryption.encrypt_fixtures = true end diff --git a/config/initializers/assets.rb b/config/initializers/assets.rb index 74eddab22..8d96bbadb 100644 --- a/config/initializers/assets.rb +++ b/config/initializers/assets.rb @@ -6,11 +6,6 @@ # Add additional assets to the asset load path. # Rails.application.config.assets.paths << Emoji.images_path -# Precompile additional assets. -# application.js, application.css, and all non-JS/CSS in the app/assets -# folder are already added. -# Rails.application.config.assets.precompile += %w( admin.js admin.css ) - # CUSTOM # Add Yarn node_modules folder to the asset load path. Rails.application.config.assets.paths << Rails.root.join('node_modules') diff --git a/config/initializers/filter_parameter_logging.rb b/config/initializers/filter_parameter_logging.rb index c7bff7f66..fcf96e9a7 100644 --- a/config/initializers/filter_parameter_logging.rb +++ b/config/initializers/filter_parameter_logging.rb @@ -1,9 +1,10 @@ # Be sure to restart your server when you modify this file. -# Configure sensitive parameters which will be filtered from the log file. +# Configure parameters to be partially matched (e.g. passw matches password) and filtered from the log file. +# Use this to limit dissemination of sensitive information. +# See the ActiveSupport::ParameterFilter documentation for supported notations and behaviors. Rails.application.config.filter_parameters += [ - # Defaults - :passw, :secret, :token, :_key, :crypt, :salt, :certificate, :otp, :ssn, + :passw, :email, :secret, :token, :_key, :crypt, :salt, :certificate, :otp, :ssn, :cvv, :cvc # Custom :password, diff --git a/config/initializers/new_framework_defaults_8_0.rb b/config/initializers/new_framework_defaults_8_0.rb new file mode 100644 index 000000000..92efa9515 --- /dev/null +++ b/config/initializers/new_framework_defaults_8_0.rb @@ -0,0 +1,30 @@ +# Be sure to restart your server when you modify this file. +# +# This file eases your Rails 8.0 framework defaults upgrade. +# +# Uncomment each configuration one by one to switch to the new default. +# Once your application is ready to run with all new defaults, you can remove +# this file and set the `config.load_defaults` to `8.0`. +# +# Read the Guide for Upgrading Ruby on Rails for more info on each option. +# https://guides.rubyonrails.org/upgrading_ruby_on_rails.html + +### +# Specifies whether `to_time` methods preserve the UTC offset of their receivers or preserves the timezone. +# If set to `:zone`, `to_time` methods will use the timezone of their receivers. +# If set to `:offset`, `to_time` methods will use the UTC offset. +# If `false`, `to_time` methods will convert to the local system UTC offset instead. +#++ +# Rails.application.config.active_support.to_time_preserves_timezone = :zone + +### +# When both `If-Modified-Since` and `If-None-Match` are provided by the client +# only consider `If-None-Match` as specified by RFC 7232 Section 6. +# If set to `false` both conditions need to be satisfied. +#++ +# Rails.application.config.action_dispatch.strict_freshness = true + +### +# Set `Regexp.timeout` to `1`s by default to improve security over Regexp Denial-of-Service attacks. +#++ +# Regexp.timeout = 1 diff --git a/config/puma.rb b/config/puma.rb index 62134f0f1..07c7e2a15 100644 --- a/config/puma.rb +++ b/config/puma.rb @@ -1,44 +1,49 @@ -# Puma can serve each request in a thread from an internal thread pool. -# The `threads` method setting takes two numbers: a minimum and maximum. -# Any libraries that use thread pools should be configured to match -# the maximum value specified for Puma. Default is set to 5 threads for minimum -# and maximum; this matches the default thread size of Active Record. +# This configuration file will be evaluated by Puma. The top-level methods that +# are invoked here are part of Puma's configuration DSL. For more information +# about methods provided by the DSL, see https://puma.io/puma/Puma/DSL.html. # -max_threads_count = ENV.fetch("RAILS_MAX_THREADS") { 5 } -min_threads_count = ENV.fetch("RAILS_MIN_THREADS") { max_threads_count } -threads min_threads_count, max_threads_count - -# Specifies the `worker_timeout` threshold that Puma will use to wait before -# terminating a worker in development environments. +# Puma starts a configurable number of processes (workers) and each process +# serves each request in a thread from an internal thread pool. # -worker_timeout 3600 if ENV.fetch("RAILS_ENV", "development") == "development" - - -# Specifies the `port` that Puma will listen on to receive requests; default is 3000. +# You can control the number of workers using ENV["WEB_CONCURRENCY"]. You +# should only set this value when you want to run 2 or more workers. The +# default is already 1. # -port ENV.fetch("PORT") { 3000 } - -# Specifies the `environment` that Puma will run in. +# The ideal number of threads per worker depends both on how much time the +# application spends waiting for IO operations and on how much you wish to +# prioritize throughput over latency. # -environment ENV.fetch("RAILS_ENV") { "development" } - -# Specifies the `pidfile` that Puma will use. -pidfile ENV.fetch("PIDFILE") { "tmp/pids/server.pid" } - -# Specifies the number of `workers` to boot in clustered mode. -# Workers are forked web server processes. If using threads and workers together -# the concurrency of the application would be max `threads` * `workers`. -# Workers do not work on JRuby or Windows (both of which do not support -# processes). +# As a rule of thumb, increasing the number of threads will increase how much +# traffic a given process can handle (throughput), but due to CRuby's +# Global VM Lock (GVL) it has diminishing returns and will degrade the +# response time (latency) of the application. # -workers ENV.fetch("WEB_CONCURRENCY") { 2 } - -# Use the `preload_app!` method when specifying a `workers` number. -# This directive tells Puma to first boot the application and load code -# before forking the application. This takes advantage of Copy On Write -# process behavior so workers use less memory. +# The default is set to 3 threads as it's deemed a decent compromise between +# throughput and latency for the average Rails application. # -preload_app! +# Any libraries that use a connection pool or another resource pool should +# be configured to provide at least as many connections as the number of +# threads. This includes Active Record's `pool` parameter in `database.yml`. +threads_count = ENV.fetch("RAILS_MAX_THREADS", 5) +threads threads_count, threads_count + +# Specifies the `port` that Puma will listen on to receive requests; default is 3000. +# port ENV.fetch("PORT", 3000) # Overruled in heroku settings -# Allow puma to be restarted by `rails restart` command. +# Allow puma to be restarted by `bin/rails restart` command. plugin :tmp_restart + +# Run the Solid Queue supervisor inside of Puma for single-server deployments +plugin :solid_queue if ENV["SOLID_QUEUE_IN_PUMA"] + +# Specify the PID file. Defaults to tmp/pids/server.pid in development. +# In other environments, only set the PID file if requested. +pidfile ENV["PIDFILE"] if ENV["PIDFILE"] + +# Heroku specific config +# https://devcenter.heroku.com/articles/deploying-rails-applications-with-the-puma-web-server +workers Integer(ENV['WEB_CONCURRENCY'] || 2) +port(ENV['PORT'] || 3000, "::") +enable_keep_alives(false) if respond_to?(:enable_keep_alives) +rackup DefaultRackup if defined?(DefaultRackup) +environment ENV['RAILS_ENV'] || 'development' diff --git a/public/400.html b/public/400.html new file mode 100644 index 000000000..282dbc8cc --- /dev/null +++ b/public/400.html @@ -0,0 +1,114 @@ + + + + + + + The server cannot process the request due to a client error (400 Bad Request) + + + + + + + + + + + + + +
+
+ +
+
+

The server cannot process the request due to a client error. Please check the request and try again. If you’re the application owner check the logs for more information.

+
+
+ + + + diff --git a/public/404.html b/public/404.html new file mode 100644 index 000000000..c0670bc87 --- /dev/null +++ b/public/404.html @@ -0,0 +1,114 @@ + + + + + + + The page you were looking for doesn’t exist (404 Not found) + + + + + + + + + + + + + +
+
+ +
+
+

The page you were looking for doesn’t exist. You may have mistyped the address or the page may have moved. If you’re the application owner check the logs for more information.

+
+
+ + + + diff --git a/public/406-unsupported-browser.html b/public/406-unsupported-browser.html new file mode 100644 index 000000000..9532a9ccd --- /dev/null +++ b/public/406-unsupported-browser.html @@ -0,0 +1,114 @@ + + + + + + + Your browser is not supported (406 Not Acceptable) + + + + + + + + + + + + + +
+
+ +
+
+

Your browser is not supported.
Please upgrade your browser to continue.

+
+
+ + + + diff --git a/public/422.html b/public/422.html new file mode 100644 index 000000000..8bcf06014 --- /dev/null +++ b/public/422.html @@ -0,0 +1,114 @@ + + + + + + + The change you wanted was rejected (422 Unprocessable Entity) + + + + + + + + + + + + + +
+
+ +
+
+

The change you wanted was rejected. Maybe you tried to change something you didn’t have access to. If you’re the application owner check the logs for more information.

+
+
+ + + + diff --git a/public/500.html b/public/500.html new file mode 100644 index 000000000..d77718c3a --- /dev/null +++ b/public/500.html @@ -0,0 +1,114 @@ + + + + + + + We’re sorry, but something went wrong (500 Internal Server Error) + + + + + + + + + + + + + +
+
+ +
+
+

We’re sorry, but something went wrong.
If you’re the application owner check the logs for more information.

+
+
+ + + + diff --git a/public/icon.png b/public/icon.png new file mode 100644 index 000000000..c4c9dbfbb Binary files /dev/null and b/public/icon.png differ diff --git a/public/icon.svg b/public/icon.svg new file mode 100644 index 000000000..04b34bf83 --- /dev/null +++ b/public/icon.svg @@ -0,0 +1,3 @@ + + + diff --git a/public/robots.txt b/public/robots.txt index f6ca098a0..ab7fef159 100644 --- a/public/robots.txt +++ b/public/robots.txt @@ -1,4 +1,4 @@ -# See http://www.robotstxt.org/robotstxt.html for documentation on how to use the robots.txt file +# See https://www.robotstxt.org/robotstxt.html for documentation on how to use the robots.txt file # # To ban all spiders from the entire site uncomment the next two lines: User-agent: *