multiple links updated

Author: EricSchulze

README.md

@@ -2,7 +2,7 @@
 
 [![Compile examples](https://github.com/Infineon/arduino-pas-co2-sensor/actions/workflows/compile_examples.yml/badge.svg)](https://github.com/Infineon/arduino-pas-co2-sensor/actions/workflows/compile_examples.yml)
 
-Arduino library of Infineon's [**XENSIV™ Photoacoustic Spectroscopy (PAS) CO2**](https://www.infineon.com/cms/en/product/sensor/co2-sensors/) miniaturized sensor.
+Arduino library of Infineon's [**XENSIV™ Photoacoustic Spectroscopy (PAS) CO2**](https://www.infineon.com/products/sensor/gas-sensors/co2-sensors#products/) miniaturized sensor.
 
 <img src="docs/img/pas-co2-module.png" width=200>
 

docs/getting-started.rst

@@ -14,16 +14,16 @@ Required Hardware
 
     * - Name
       - Picture
-    * - `XENSIV™ PAS CO2 Sensor Shield2Go <https://www.infineon.com/cms/en/product/evaluation-boards/shield_pasco2_sensor>`_
+    * - `XENSIV™ PAS CO2 Sensor Shield2Go <https://www.infineon.com/evaluation-board/SHIELD-PASCO2-SENSOR>`_
       - .. image:: img/pas-co2-s2go-front.png
             :height: 60
-    * - or `XENSIV™ PAS CO2 Miniboard <https://www.infineon.com/cms/en/product/evaluation-boards/eval_pasco2_miniboard>`_
+    * - or `XENSIV™ PAS CO2 Miniboard <https://www.infineon.com/evaluation-board/EVAL-PASCO2-MINIBOARD>`_
       - .. image:: img/pas-co2-miniboard.png
             :height: 80 
     * - `XMC 2Go <https://www.infineon.com/cms/de/product/evaluation-boards/kit_xmc_2go_xmc1100_v1/>`_
       - .. image:: img/xmc2go.jpg
             :height: 80
-    * - or `XMC1100 Boot Kit <https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc11_boot_001/>`_
+    * - or `XMC1100 Boot Kit <https://www.infineon.com/evaluation-board/KIT-XMC11-BOOT-001/>`_
       - .. image:: img/xmc1100-bootkit.jpg
             :height: 80
     * - Pin headers (included with the XMC 2Go) 
@@ -82,7 +82,7 @@ Be sure that the corresponding solder jumper are set for I2C mode, and PSEL is p
 to GND. 
 For this example it is not required, but consider connecting the interrupt signal to the pin 2(P1.4)
 or 3(P0.0) of the XMC1100 Boot Kit for appliations that require interrupts.
-Check the `Shield2Go Manual <https://www.infineon.com/dgdl/Infineon-Quickstart_guide_PAS_CO2_Shield2go-UserManual-v01_00-EN.pdf?fileId=8ac78c8c7f2a768a017f6ab96bf11845>`_ for complete details.
+Check the `Shield2Go Manual <https://www.infineon.com/assets/row/public/documents/24/44/infineon-quickstart-guide-pas-co2-shield2go-usermanual-en.pdf>`_ for complete details.
 
 Then, simply connect the eval kit to the computer with the USB cable. 
 

docs/hw-platforms.rst

@@ -9,8 +9,8 @@ This library can support any break-out board or (PAS) XENSIV™ CO2 Sensor based
 .. image:: img/pas-co2-module.png
     :width: 200
 
-* `XENSIV™ PAS CO2 Stand-alone module product page <https://www.infineon.com/cms/en/product/sensor/co2-sensors>`_
-* `XENSIV™ PAS CO2 Sensor documentation <https://www.infineon.com/cms/en/product/sensor/co2-sensors/#!documents>`_
+* `XENSIV™ PAS CO2 Stand-alone module product page <https://www.infineon.com/products/sensor/gas-sensors/co2-sensors#products>`_
+* `XENSIV™ PAS CO2 Sensor documentation <https://www.infineon.com/products/sensor/gas-sensors/co2-sensors#products/#!documents>`_
 
 The following kits can be integrated in Arduino compatible MCUs and are supported by this library:
 
@@ -20,8 +20,8 @@ XENSIV™ PAS CO2 Sensor Shield2Go
  .. image:: img/pas-co2-s2go-front.png
     :width: 300
 
-* `XENSIV™ PAS CO2 Shield2Go product page <https://www.infineon.com/cms/en/product/evaluation-boards/shield_pasco2_sensor/>`_
-* `Quick Start Guide Shield2Go <https://www.infineon.com/dgdl/Infineon-Quickstart_guide_PAS_CO2_Shield2go-UserManual-v01_00-EN.pdf?fileId=8ac78c8c7f2a768a017f6ab96bf11845>`_ (for Arduino)
+* `XENSIV™ PAS CO2 Shield2Go product page <https://www.infineon.com/evaluation-board/SHIELD-PASCO2-SENSOR/>`_
+* `Quick Start Guide Shield2Go <https://www.infineon.com/assets/row/public/documents/24/44/infineon-quickstart-guide-pas-co2-shield2go-usermanual-en.pdf>_ (for Arduino)
 
 Pinout Diagram
 ^^^^^^^^^^^^^^
@@ -77,8 +77,8 @@ XENSIV™ PAS CO2 Miniboard
 .. image:: img/pas-co2-miniboard.png
     :width: 200
 
-* `XENSIV™ PAS CO2 Miniboard product page <https://www.infineon.com/cms/en/product/evaluation-boards/eval_pasco2_miniboard>`_
-* `XENSIV™ PAS CO2 Miniboard documentation <https://www.infineon.com/cms/en/product/evaluation-boards/eval_pasco2_miniboard/#!documents>`_
+* `XENSIV™ PAS CO2 Miniboard product page <https://www.infineon.com/evaluation-board/EVAL-PASCO2-MINIBOARD>`_
+* `XENSIV™ PAS CO2 Miniboard documentation <https://www.infineon.com/evaluation-board/EVAL-PASCO2-MINIBOARD#documents>`_
 
 Pinout Diagram
 ^^^^^^^^^^^^^^
@@ -136,9 +136,9 @@ The library examples have been built and successfully executed on the following
     :header-rows: 1
 
     * - MCU Platforms
-    * - `XMC 2Go <https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc_2go_xmc1100_v1>`_
-    * - `XMC1100 Boot Kit <https://www.infineon.com/cms/en/product/evaluation-boards/kit_xmc11_boot_001>`_
+    * - `XMC 2Go <https://www.infineon.com/evaluation-board/KIT-XMC14-2GO>`_
+    * - `XMC1100 Boot Kit <https://www.infineon.com/evaluation-board/KIT-XMC11-BOOT-001>`_
     * - `Arduino Uno Rev3 <https://store.arduino.cc/arduino-uno-rev3>`_
 
 
-Find out which boards are build checked under continuous integration `here <https://github.com/Infineon/arduino-pas-co2-sensor/blob/master/.github/workflows/build-check.yml>`_.
+Find out which boards are build checked under continuous integration `here <https://github.com/Infineon/arduino-pas-co2-sensor/blob/master/.github/workflows/compile_examples.yml>`_.

docs/index.rst

@@ -24,4 +24,4 @@ Welcome to the Infineon Photoacoustic Spectroscopy XENSIV™ PAS CO2 Sensor Ardu
 License
 =======
 
-Find the license for this library `here <https://github.com/Infineon/arduino-pas-co2-sensor/blob/master/LICENSE>`_.
+Find the license for this library `here <https://github.com/Infineon/arduino-pas-co2-sensor/blob/master/LICENSE.md>`_.