Not work explorer

[anmal2001]

I open the folder and it doesn't start. It is not possible to create a folder and files, etc.

[Raphire]

Heya, Have you tried restarting your PC? I have noticed that restarting the explorer process can cause some weird issues sometimes. A restart usually fixes this.

[anmal2001]

@Raphire Yes , I've already tried everything, nothing helps. Only recovery , all files will be deleted , I 've been working on them a lot and now I can 't even copy them . How do I roll it back?

[PrabodhGyawali]

Are you able to use the Powershell Terminal to do all this?

[Raphire]

@anmal2001 That's unfortunate. Don't reset your pc though, your files are fire. It's just explorer that's acting up.

What settings did you use with the script? The defaults, or did you select any custom options?

If you used the defaults, it's likely the change that disables web/bing search features. This can be re-enabeled with the registry file found here.

Use the button highlighted in the image below to download it.

Run that file. After that, restart or sign-out and back in to apply the change. This should fix it.

[anmal2001]

@Raphire , not work. I downloaded the file, ran it, rebooted the laptop, and it still doesn't work. It doesn't even start, when you click on a folder, it loads something and then stops

When trying to click on the folder several times, an error came out, ONCE - A failure when calling the procedure remotely.

[anmal2001]

@PrabodhGyawali yes, terminal is working

[Raphire]

@anmal2001 That error does narrow things down. We can try a few things for that. If those fail. There's a few steps we can take to diagnose further.

First step

The first step would be to check Event Viewer for any possible errors or warnings that could point us in the right direction.

1. Open Event Viewer by searching for it in Windows Search.
2. Open and check both the Application and System Windows Logs, highlighted red.

3. Filter the results for easier viewing. You can enter the filtering options via the option highlighted green in the image above.

4. Apply the filters to only show Critical, Error and Warning events, and click OK.

Please report back any recent events here.

Possible solutions

In the mean time, you can try a few common solutions.

1. Confirm/fix RPC services settings

1. Open Services by searching for it in Windows Search. Or by pressing Win + R and typing services.msc.

2. Scroll down and select Remote Procedure Call (RPC). Check if this service has status Running.
3. Click into the settings of this service and in the General tab, ensure that the Startup type is changed to Automatic.

4. Go to DCOM Server Process Launcher. As with the service above, confirm it is running and ensure that the Startup type is also set to Automatic.

5. Next, navigate to Remote Procedure Call (RPC) Locator, set the Startup type here to Manual.

After this, restart your PC and see if the issues persists.

2. Check for corrupt system files

This option is basically given as the default for any weird Windows issue. It may help here.

1. Head to the Start bar and type CMD.
2. Run Command Prompt as administrator. (Important)
3. Type in sfc /scannow, and hit Enter.

This should find and fix any corrupted files. Please report back if this finds any issues.

3. Resetting related services

It's possible some related service is not running correctly or corrupted. We can try manually stopping and starting them, and clear cache files that may be corrupted.

1. Head to the Start bar and type CMD.
2. Run Command Prompt as administrator. (Important)
3. Copy the commands below into the Command Prompt 1-by-1 and press Enter after pasting each command.

net start rpcss
net stop wuauserv
net stop cryptSvc
net stop bits
net stop msiserver
ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
ren C:\Windows\System32\catroot2 catroot2.old
net start wuauserv
net start cryptSvc
net start bits
net start msiserver

Boot into Safe Mode

If these options all fail to fix the issue, we can try booting into safe mode to see if the issue exists there aswell. You can enter it from the Setting app, but as you'll see Microsoft has made the process a bit tedious.

1. Open Settings. Win + I
2. Navigate to the System page, then click on Recovery.

3. On the Recovery page, in the Recovery Options section, click on the Restart now button next to Advanced startup.

4. Click Restart now

5. Once Windows reboots select Troubleshoot

6. Next go through the options shown below. Advanced options > Startup Settings > Restart, then press 4 or F4 to activate Safe mode. It's also possible to press 5 or 6 to boot into Safe mode with networking or Command prompt respectively.

Once you boot into Safe mode, check if Windows Explorer works and report back.

[anmal2001]

@Raphire After checking the events, only one error was detected in the explorer in the Application:
The name of the failed application: explorer.exe , version: 10.0.22621.317, timestamp: 0xe1add17c
The name of the failed module: Windows.UI.FileExplorer.dll , version: 10.0.22621.317, timestamp: 0x7d2315b6
Exception code: 0xc000041d
Error offset: 0x0000000000016905
ID of the failed process: 0x0x1FEC
Launch time of the failed application: 0x0x1DBB917EF4F8787
The path of the failed application: C:\Windows\explorer.exe
The path of the failed module: C:\Windows\System32\Windows.UI.FileExplorer.dll
Report ID: a1ae1feb-c333-4629-9eb3-fa8ca13591b6
The full name of the failed package:

1. Confirm/fix the settings of the RPC services - it did not help
2. Check if there are any corrupted system files:
   The start of the verification stage when scanning the system.
   The verification is 100% complete.

The Windows Resource Protection program detected the corrupted files and successfully
restored them.
For more information, see the CBS.Log file, which is located at the following path:
windir\Logs\CBS\CBS.log. For example, C:\Windows\Logs\CBS\CBS.log . The details
are included in the log file provided by the /OFFLOGFILE flag.

3 Resetting related services settings is done

4 Booting in safe mode - did not help

microsoft/microsoft-ui-xaml#6482 - It's not decided

[Raphire]

@anmal2001 thanks for reporting back. I find it interesting that the issue persists even in safe mode.

The exception code 0xc000041d suggests a possible error with communication between Windows and device(drivers) or an application. (See: https://superuser.com/questions/869526/what-does-the-error-message-0xc000041d-mean)

Do you happen to have any themes/tools or other software installed that interacts with or hooks into Windows Explorer or the context menu?

Another possibility could be connected usb or network storage drives. Do you have any of these connected? I have personally encountered file explorer hanging because of a connected storage drive that was not working properly.

Sfc seems to have found some corrupted files. You could try doing a more thorough repair using DISM. Open CMD as admin and run the following command to do that:

DISM.exe /Online /Cleanup-Image /Restorehealth

[anmal2001]

@Raphire I did not install themes/tools.
I turned off all usb devices and rebooted them , but it didn 't help
Launched DISM - successfully completed, rebooted did not help
I'm making a decision to restore

[Raphire]

@anmal2001 Have you been able to get your files? You could try using an alternative file explorer like Files, if you haven't already secured them.

[anmal2001]

@Raphire I restored the system - the explorer is normal, WHILE it's working) thank you

[DuckyD3v]

I wonder if a permanent patch can be made on this to resolve this if it happens again on someone else

Like a separate script and instructions or a addition in the main script to avoid this overall