fmcomms11: Add VADJ value in READMEs

Signed-off-by: Stanca Pop <[email protected]>

Author: StancaPop

projects/fmcomms11/README.md

@@ -3,6 +3,7 @@
 - Evaluation board product page: [AD-FMCOMMS11-EBZ](https://www.analog.com/ad-fmcomms11-ebz)
 - System documentation: https://wiki.analog.com/resources/eval/user-guides/ad-fmcomms11-ebz
 - HDL project documentation: https://analogdevicesinc.github.io/hdl/projects/fmcomms11/index.html
+- Evaluation board VADJ range: 1.2V - 2.5V
 
 ## Supported parts
 
@@ -13,4 +14,4 @@
 
 ## Building the project
 
-Please enter the folder for the FPGA carrier you want to use and read the README.md.
+Please enter the folder for the FPGA carrier you want to use and read the README.md.

projects/fmcomms11/zc706/README.md

@@ -1,5 +1,9 @@
+<!-- no_build_example, no_no_os -->
+
 # FMCOMMS11/ZC706 HDL Project
 
+- VADJ with which it was tested in hardware: 2.5V
+
 ## Building the project
 
 ```
@@ -15,4 +19,4 @@ This project has a fixed configuration. The parameters from the environment are:
 
 Corresponding device trees:
 - [zynq-zc706-adv7511-fmcomms11.dts](https://github.com/analogdevicesinc/linux/blob/main/arch/arm/boot/dts/xilinx/zynq-zc706-adv7511-fmcomms11.dts)
-- Revision A of the board [zynq-zc706-adv7511-fmcomms11-RevA.dts](https://github.com/analogdevicesinc/linux/blob/main/arch/arm/boot/dts/xilinx/zynq-zc706-adv7511-fmcomms11-RevA.dts)
+- Revision A of the board [zynq-zc706-adv7511-fmcomms11-RevA.dts](https://github.com/analogdevicesinc/linux/blob/main/arch/arm/boot/dts/xilinx/zynq-zc706-adv7511-fmcomms11-RevA.dts)