diff --git a/README.md b/README.md
index 2603747..3ed2a2b 100644
--- a/README.md
+++ b/README.md
@@ -147,6 +147,21 @@ in the Devices tab.
 
 You can disable this with `--ha_discovery=false` or change the discovery prefix, the default is `--ha_discovery_prefix=homeassistant`.
 
+#### Configuration file format
+
+Configuration file has a single level structure where the parameters are the same as program command line options.
+
+YAML configuration file example:
+
+```
+mqtt_server: "tcp://localhost:1883"
+mqtt_username: "XXXXX"
+mqtt_password: "XXXXX"
+update_interval: 10m
+wifi_restart_time: 30s
+wifi_restart_retry_time: 2m
+```
+
 #### Raspbian setup with auto-start
 
 It's useful to have the tool auto-start when running on e.g a Raspberry Pi. The following
@@ -161,9 +176,11 @@ MACAddress=b8:27:eb:50:c0:52
 
 [Link]
 # This should be the MAC address to use to connect to the car, per above.
+# Note that the MACAddress setting is optional if NetworkManager is used, see below
 MACAddress=ee:4d:ec:de:7a:91
 NamePolicy=kernel database onboard slot path
-
+# Optionally force the human-readable name of the WiFi network interface
+Name=wlan0
 ```
 
 - Add the car's Wifi info to `/etc/wpa_supplicant/wpa_supplicant.conf`:
@@ -181,6 +198,71 @@ network={
 
 ```
 
+- Alternatively in case NetworkManager infrastructure is used. Edit or add file `/etc/NetworkManager/system-connections/WiFi-PHEV.nmconnection` with the following content:
+
+```
+[connection]
+id=WiFi-PHEV
+uuid=54031489-4343-4db2-a70c-cff5ed4013b2
+type=wifi
+auth-retries=10
+autoconnect-priority=10
+autoconnect-retries=0
+# Replace with your wlan interface name
+interface-name=wlan0
+# Disable unnecessary protocols
+lldp=0
+llmnr=0
+mdns=0
+timestamp=1743267699
+wait-device-timeout=30000
+
+[wifi]
+band=bg
+mode=infrastructure
+ssid=<REMOTExxxxxx SSID of your vehicle WiFi network>
+# Optional for faster connection
+bssid=<BSSID/MAC of your vehicle WiFi network>
+channel=<3 (default) of 8>
+# Optional to emulate connection from your phone
+cloned-mac-address=<Your phone MAC address>
+
+[wifi-security]
+key-mgmt=wpa-psk
+psk=<Password>
+
+[ipv4]
+# This is optional to ignore vehicle DCHP server, and force static IP address and routing table setup
+method=manual
+address1=192.168.8.47/24
+dns=8.8.8.8;8.8.4.4;
+ignore-auto-dns=true
+# Prevent NetworkManager to add new connection to the default routing table
+never-default=true
+# Lower the traffic priority to force only packets dedicated to 192.168.8.255 subnet to be routed via WiFi to the vehicle
+route-metric=40
+# Force routing table setup
+route1=192.168.8.0/24,192.168.8.46
+
+[ipv6]
+# Disable IPv6
+addr-gen-mode=default
+method=disabled
+
+[proxy]
+```
+
+- Reload the list of network connections `nmcli connection reload`.
+- Raise the nework connection `nmcli connection up WiFi-PHEV`.
+- Check the connection status `nmcli connection`.
+
+After that the connection and WiFi network interface are managed by NetworkManager. It will reconnect automatically when the connection is lost,
+even for a long period of time.
+
+Note that the connection quality heavily depends on the distance between the vehicle and your RPi, type of walls in between, etc.
+In case the distance is short, the NetworkManager setup is stable, and the restart WiFi functionality is not needed.
+
+
 - Add the following to `/etc/systemd/system/phev2mqtt.service`, updating the MQTT address to
 suit your setup:
 
@@ -189,6 +271,9 @@ suit your setup:
 Description=phev2mqtt service script
 StartLimitIntervalSec=5
 After=syslog.target network.target
+# Alternatively if MQTT is used
+After=syslog.target network-online.target
+Requires=mosquitto.service
 
 [Service]
 Type=exec