From 81df630a0b3064109caa12de13e432fcf0b4c044 Mon Sep 17 00:00:00 2001
From: Martin Filla <freebsd@sysctl.cz>
Date: Tue, 9 Sep 2025 16:34:38 +0200
Subject: [PATCH] sophgo: import new .dts

---
 .../include/dt-bindings/clock/cv181x-clock.h  | 175 ++++
 .../include/dt-bindings/dma/cv181x-dmamap.h   |  48 +
 .../include/dt-bindings/reset/cv181x-resets.h | 172 ++++
 .../src/riscv/sophgo/cv181x_asic_bga.dtsi     |  56 ++
 .../src/riscv/sophgo/cv181x_asic_emmc.dtsi    |   4 +
 .../src/riscv/sophgo/cv181x_asic_qfn.dtsi     | 120 +++
 .../src/riscv/sophgo/cv181x_asic_sd.dtsi      |   4 +
 .../src/riscv/sophgo/cv181x_asic_spinand.dtsi |   5 +
 .../src/riscv/sophgo/cv181x_asic_spinor.dtsi  |   5 +
 .../src/riscv/sophgo/cv181x_base.dtsi         | 932 ++++++++++++++++++
 .../src/riscv/sophgo/cv181x_base_arm.dtsi     | 320 ++++++
 .../src/riscv/sophgo/cv181x_base_riscv.dtsi   | 378 +++++++
 .../riscv/sophgo/cv181x_default_memmap.dtsi   |  25 +
 .../sg2000_milkv_duos_glibc_arm64_emmc.dts    | 108 ++
 .../sg2000_milkv_duos_glibc_arm64_sd.dts      | 112 +++
 .../sg2000_milkv_duos_musl_riscv64_emmc.dts   | 108 ++
 .../sg2000_milkv_duos_musl_riscv64_sd.dts     | 108 ++
 .../src/riscv/sophgo/sg2000_wevb_arm64_sd.dts |  13 +
 .../riscv/sophgo/sg2000_wevb_riscv64_sd.dts   |  10 +
 sys/modules/dtb/sophgo/Makefile               |   9 +
 sys/riscv/conf/GENERIC                        |   1 +
 sys/riscv/conf/std.sophgo                     |   8 +
 sys/riscv/sophgo/files.sophgo                 |   2 +
 23 files changed, 2723 insertions(+)
 create mode 100644 sys/contrib/device-tree/include/dt-bindings/clock/cv181x-clock.h
 create mode 100644 sys/contrib/device-tree/include/dt-bindings/dma/cv181x-dmamap.h
 create mode 100644 sys/contrib/device-tree/include/dt-bindings/reset/cv181x-resets.h
 create mode 100644 sys/contrib/device-tree/src/riscv/sophgo/cv181x_asic_bga.dtsi
 create mode 100644 sys/contrib/device-tree/src/riscv/sophgo/cv181x_asic_emmc.dtsi
 create mode 100644 sys/contrib/device-tree/src/riscv/sophgo/cv181x_asic_qfn.dtsi
 create mode 100644 sys/contrib/device-tree/src/riscv/sophgo/cv181x_asic_sd.dtsi
 create mode 100644 sys/contrib/device-tree/src/riscv/sophgo/cv181x_asic_spinand.dtsi
 create mode 100644 sys/contrib/device-tree/src/riscv/sophgo/cv181x_asic_spinor.dtsi
 create mode 100644 sys/contrib/device-tree/src/riscv/sophgo/cv181x_base.dtsi
 create mode 100644 sys/contrib/device-tree/src/riscv/sophgo/cv181x_base_arm.dtsi
 create mode 100644 sys/contrib/device-tree/src/riscv/sophgo/cv181x_base_riscv.dtsi
 create mode 100644 sys/contrib/device-tree/src/riscv/sophgo/cv181x_default_memmap.dtsi
 create mode 100644 sys/contrib/device-tree/src/riscv/sophgo/sg2000_milkv_duos_glibc_arm64_emmc.dts
 create mode 100644 sys/contrib/device-tree/src/riscv/sophgo/sg2000_milkv_duos_glibc_arm64_sd.dts
 create mode 100644 sys/contrib/device-tree/src/riscv/sophgo/sg2000_milkv_duos_musl_riscv64_emmc.dts
 create mode 100644 sys/contrib/device-tree/src/riscv/sophgo/sg2000_milkv_duos_musl_riscv64_sd.dts
 create mode 100644 sys/contrib/device-tree/src/riscv/sophgo/sg2000_wevb_arm64_sd.dts
 create mode 100644 sys/contrib/device-tree/src/riscv/sophgo/sg2000_wevb_riscv64_sd.dts
 create mode 100644 sys/modules/dtb/sophgo/Makefile
 create mode 100644 sys/riscv/conf/std.sophgo
 create mode 100644 sys/riscv/sophgo/files.sophgo

diff --git a/sys/contrib/device-tree/include/dt-bindings/clock/cv181x-clock.h b/sys/contrib/device-tree/include/dt-bindings/clock/cv181x-clock.h
new file mode 100644
index 00000000000000..ed76e4d8ef9542
--- /dev/null
+++ b/sys/contrib/device-tree/include/dt-bindings/clock/cv181x-clock.h
@@ -0,0 +1,175 @@
+/*
+ * Copyright (C) Cvitek Co., Ltd. 2019-2021. All rights reserved.
+ *
+ * File Name: cv181x-clock.h
+ * Description:
+ */
+
+#ifndef __DT_BINDINGS_CLK_CV181X_H__
+#define __DT_BINDINGS_CLK_CV181X_H__
+
+#define CV181X_CLK_MPLL				0
+#define CV181X_CLK_TPLL				1
+#define CV181X_CLK_FPLL				2
+#define CV181X_CLK_MIPIMPLL			3
+#define CV181X_CLK_A0PLL				4
+#define CV181X_CLK_DISPPLL			5
+#define CV181X_CLK_CAM0PLL			6
+#define CV181X_CLK_CAM1PLL			7
+
+#define CV181X_CLK_MIPIMPLL_D3			8
+#define CV181X_CLK_CAM0PLL_D2			9
+#define CV181X_CLK_CAM0PLL_D3			10
+
+#define CV181X_CLK_A53				11
+#define CV181X_CLK_CPU_AXI0			12
+#define CV181X_CLK_CPU_GIC			13
+#define CV181X_CLK_XTAL_A53			14
+#define CV181X_CLK_TPU				15
+#define CV181X_CLK_TPU_FAB			16
+#define CV181X_CLK_AHB_ROM			17
+#define CV181X_CLK_DDR_AXI_REG			18
+#define CV181X_CLK_RTC_25M			19
+#define CV181X_CLK_TEMPSEN			20
+#define CV181X_CLK_SARADC				21
+#define CV181X_CLK_EFUSE				22
+#define CV181X_CLK_APB_EFUSE			23
+#define CV181X_CLK_DEBUG				24
+#define CV181X_CLK_XTAL_MISC			25
+#define CV181X_CLK_AXI4_EMMC			26
+#define CV181X_CLK_EMMC				27
+#define CV181X_CLK_100K_EMMC			28
+#define CV181X_CLK_AXI4_SD0			29
+#define CV181X_CLK_SD0				30
+#define CV181X_CLK_100K_SD0			31
+#define CV181X_CLK_AXI4_SD1			32
+#define CV181X_CLK_SD1				33
+#define CV181X_CLK_100K_SD1			34
+#define CV181X_CLK_SPI_NAND			35
+#define CV181X_CLK_500M_ETH0			36
+#define CV181X_CLK_AXI4_ETH0			37
+#define CV181X_CLK_500M_ETH1			38
+#define CV181X_CLK_AXI4_ETH1			39
+#define CV181X_CLK_APB_GPIO			40
+#define CV181X_CLK_APB_GPIO_INTR			41
+#define CV181X_CLK_GPIO_DB			42
+#define CV181X_CLK_AHB_SF				43
+#define CV181X_CLK_SDMA_AXI			44
+#define CV181X_CLK_SDMA_AUD0			45
+#define CV181X_CLK_SDMA_AUD1			46
+#define CV181X_CLK_SDMA_AUD2			47
+#define CV181X_CLK_SDMA_AUD3			48
+#define CV181X_CLK_APB_I2C			49
+#define CV181X_CLK_APB_WDT			50
+#define CV181X_CLK_PWM				51
+#define CV181X_CLK_APB_SPI0			52
+#define CV181X_CLK_APB_SPI1			53
+#define CV181X_CLK_APB_SPI2			54
+#define CV181X_CLK_APB_SPI3			55
+#define CV181X_CLK_CAM0_200			56
+#define CV181X_CLK_UART0				57
+#define CV181X_CLK_APB_UART0			58
+#define CV181X_CLK_UART1				59
+#define CV181X_CLK_APB_UART1			60
+#define CV181X_CLK_UART2				61
+#define CV181X_CLK_APB_UART2			62
+#define CV181X_CLK_UART3				63
+#define CV181X_CLK_APB_UART3			64
+#define CV181X_CLK_UART4				65
+#define CV181X_CLK_APB_UART4			66
+#define CV181X_CLK_APB_I2S0			67
+#define CV181X_CLK_APB_I2S1			68
+#define CV181X_CLK_APB_I2S2			69
+#define CV181X_CLK_APB_I2S3			70
+#define CV181X_CLK_AXI4_USB			71
+#define CV181X_CLK_APB_USB			72
+#define CV181X_CLK_125M_USB			73
+#define CV181X_CLK_33K_USB			74
+#define CV181X_CLK_12M_USB			75
+#define CV181X_CLK_AXI4				76
+#define CV181X_CLK_AXI6				77
+#define CV181X_CLK_DSI_ESC			78
+#define CV181X_CLK_AXI_VIP			79
+#define CV181X_CLK_SRC_VIP_SYS_0			80
+#define CV181X_CLK_SRC_VIP_SYS_1			81
+#define CV181X_CLK_DISP_SRC_VIP			82
+#define CV181X_CLK_AXI_VIDEO_CODEC		83
+#define CV181X_CLK_VC_SRC0			84
+#define CV181X_CLK_H264C				85
+#define CV181X_CLK_H265C				86
+#define CV181X_CLK_JPEG				87
+#define CV181X_CLK_APB_JPEG			88
+#define CV181X_CLK_APB_H264C			89
+#define CV181X_CLK_APB_H265C			90
+#define CV181X_CLK_CAM0				91
+#define CV181X_CLK_CAM1				92
+#define CV181X_CLK_CSI_MAC0_VIP			93
+#define CV181X_CLK_CSI_MAC1_VIP			94
+#define CV181X_CLK_ISP_TOP_VIP			95
+#define CV181X_CLK_IMG_D_VIP			96
+#define CV181X_CLK_IMG_V_VIP			97
+#define CV181X_CLK_SC_TOP_VIP			98
+#define CV181X_CLK_SC_D_VIP			99
+#define CV181X_CLK_SC_V1_VIP			100
+#define CV181X_CLK_SC_V2_VIP			101
+#define CV181X_CLK_SC_V3_VIP			102
+#define CV181X_CLK_DWA_VIP			103
+#define CV181X_CLK_BT_VIP				104
+#define CV181X_CLK_DISP_VIP			105
+#define CV181X_CLK_DSI_MAC_VIP			106
+#define CV181X_CLK_LVDS0_VIP			107
+#define CV181X_CLK_LVDS1_VIP			108
+#define CV181X_CLK_CSI0_RX_VIP			109
+#define CV181X_CLK_CSI1_RX_VIP			110
+#define CV181X_CLK_PAD_VI_VIP			111
+#define CV181X_CLK_1M				112
+#define CV181X_CLK_SPI				113
+#define CV181X_CLK_I2C				114
+#define CV181X_CLK_PM				115
+#define CV181X_CLK_TIMER0				116
+#define CV181X_CLK_TIMER1				117
+#define CV181X_CLK_TIMER2				118
+#define CV181X_CLK_TIMER3				119
+#define CV181X_CLK_TIMER4				120
+#define CV181X_CLK_TIMER5				121
+#define CV181X_CLK_TIMER6				122
+#define CV181X_CLK_TIMER7				123
+#define CV181X_CLK_APB_I2C0			124
+#define CV181X_CLK_APB_I2C1			125
+#define CV181X_CLK_APB_I2C2			126
+#define CV181X_CLK_APB_I2C3			127
+#define CV181X_CLK_APB_I2C4			128
+#define CV181X_CLK_WGN				129
+#define CV181X_CLK_WGN0				130
+#define CV181X_CLK_WGN1				131
+#define CV181X_CLK_WGN2				132
+#define CV181X_CLK_KEYSCAN			133
+#define CV181X_CLK_AHB_SF1			134
+#define CV181X_CLK_VC_SRC1			135
+#define CV181X_CLK_SRC_VIP_SYS_2			136
+#define CV181X_CLK_PAD_VI1_VIP			137
+#define CV181X_CLK_CFG_REG_VIP			138
+#define CV181X_CLK_CFG_REG_VC			139
+#define CV181X_CLK_AUDSRC				140
+#define CV181X_CLK_APB_AUDSRC			141
+#define CV181X_CLK_VC_SRC2			142
+#define CV181X_CLK_PWM_SRC			143
+#define CV181X_CLK_AP_DEBUG			144
+#define CV181X_CLK_SRC_RTC_SYS_0			145
+#define CV181X_CLK_PAD_VI2_VIP			146
+#define CV181X_CLK_CSI_BE_VIP			147
+#define CV181X_CLK_VIP_IP0			148
+#define CV181X_CLK_VIP_IP1			149
+#define CV181X_CLK_VIP_IP2			150
+#define CV181X_CLK_VIP_IP3			151
+#define CV181X_CLK_C906_0				152
+#define CV181X_CLK_C906_1				153
+#define CV181X_CLK_SRC_VIP_SYS_3			154
+#define CV181X_CLK_SRC_VIP_SYS_4			155
+#define CV181X_CLK_IVE_VIP			156
+#define CV181X_CLK_RAW_VIP			157
+#define CV181X_CLK_OSDC_VIP			158
+#define CV181X_CLK_CSI_MAC2_VIP			159
+#define CV181X_CLK_CAM0_VIP			160
+
+#endif /* __DT_BINDINGS_CLK_CV181X_H__ */
diff --git a/sys/contrib/device-tree/include/dt-bindings/dma/cv181x-dmamap.h b/sys/contrib/device-tree/include/dt-bindings/dma/cv181x-dmamap.h
new file mode 100644
index 00000000000000..84a4c3664ee1c0
--- /dev/null
+++ b/sys/contrib/device-tree/include/dt-bindings/dma/cv181x-dmamap.h
@@ -0,0 +1,48 @@
+#ifndef __DT_BINDINGS_CV181X_DMAMAP_H__
+#define __DT_BINDINGS_CV181X_DMAMAP_H__
+
+#define CVI_I2S0_RX     0
+#define CVI_I2S0_TX     1
+#define CVI_I2S1_RX     2
+#define CVI_I2S1_TX     3
+#define CVI_I2S2_RX     4
+#define CVI_I2S2_TX     5
+#define CVI_I2S3_RX     6
+#define CVI_I2S3_TX     7
+#define CVI_UART0_RX    8
+#define CVI_UART0_TX    9
+#define CVI_UART1_RX    10
+#define CVI_UART1_TX    11
+#define CVI_UART2_RX    12
+#define CVI_UART2_TX    13
+#define CVI_UART3_RX    14
+#define CVI_UART3_TX    15
+#define CVI_SPI0_RX     16
+#define CVI_SPI0_TX     17
+#define CVI_SPI1_RX     18
+#define CVI_SPI1_TX     19
+#define CVI_SPI2_RX     20
+#define CVI_SPI2_TX     21
+#define CVI_SPI3_RX     22
+#define CVI_SPI3_TX     23
+#define CVI_I2C0_RX     24
+#define CVI_I2C0_TX     25
+#define CVI_I2C1_RX     26
+#define CVI_I2C1_TX     27
+#define CVI_I2C2_RX     28
+#define CVI_I2C2_TX     29
+#define CVI_I2C3_RX     30
+#define CVI_I2C3_TX     31
+#define CVI_I2C4_RX     32
+#define CVI_I2C4_TX     33
+#define CVI_TDM0_RX     34
+#define CVI_TDM0_TX     35
+#define CVI_TDM1_RX     36
+#define CVI_AUDSRC      37
+#define CVI_SPI_NAND    38
+#define CVI_SPI_NOR     39
+#define CVI_UART4_RX    40
+#define CVI_UART4_TX    41
+#define CVI_SPI_NOR1    42
+
+#endif
diff --git a/sys/contrib/device-tree/include/dt-bindings/reset/cv181x-resets.h b/sys/contrib/device-tree/include/dt-bindings/reset/cv181x-resets.h
new file mode 100644
index 00000000000000..e10d33b35446fb
--- /dev/null
+++ b/sys/contrib/device-tree/include/dt-bindings/reset/cv181x-resets.h
@@ -0,0 +1,172 @@
+/*
+ * Copyright (C) Cvitek Co., Ltd. 2019-2020. All rights reserved.
+ *
+ * File Name: cvi_template.h
+ * Description:
+ */
+
+#ifndef __DT_BINDINGS_RST_CV181X_H__
+#define __DT_BINDINGS_RST_CV181X_H__
+
+#define RST_MAINRST_AP	0
+#define RST_SECONDRST_AP	1
+#define RST_DDR	2
+#define RST_H264C	3
+#define RST_JPEG	4
+#define RST_H265C	5
+#define RST_VIPSYS	6
+#define RST_TDMA	7
+#define RST_TPU	8
+#define RST_TPUSYS	9
+#define RST_TSM	10
+#define RST_USB	11
+#define RST_ETH0	12
+#define RST_ETH1	13
+#define RST_NAND	14
+#define RST_EMMC	15
+#define RST_SD0	16
+#define RST_SD1	17
+#define RST_SDMA	18
+#define RST_I2S0	19
+#define RST_I2S1	20
+#define RST_I2S2	21
+#define RST_I2S3	22
+#define RST_UART0	23
+#define RST_UART1	24
+#define RST_UART2	25
+#define RST_UART3	26
+#define RST_I2C0	27
+#define RST_I2C1	28
+#define RST_I2C2	29
+#define RST_I2C3	30
+#define RST_I2C4	31
+#define RST_PWM0	32
+#define RST_PWM1	33
+#define RST_PWM2	34
+#define RST_PWM3	35
+#define RST_PWM4	36
+#define RST_PWM5	37
+#define RST_PWM6	38
+#define RST_PWM7	39
+#define RST_SPI0	40
+#define RST_SPI1	41
+#define RST_SPI2	42
+#define RST_SPI3	43
+#define RST_GPIO0	44
+#define RST_GPIO1	45
+#define RST_GPIO2	46
+#define RST_EFUSE	47
+#define RST_WDT	48
+#define RST_AHBRST_ROM	49
+#define RST_SPIC	50
+#define RST_TEMPSEN	51
+#define RST_SARADC	52
+#define RST_PCIERST_CDMA	53
+#define RST_PCIERST_SMMU	54
+#define RST_PCIERST_PCIE	55
+#define RST_PCIERST_FABS	56
+#define RST_PCIERST_IRQ	57
+#define RST_COMBORST_PHY0	58
+#define RST_COMBORST_PHY1	59
+#define RST_USB1	60
+#define RST_SPIRST_NAND	61
+#define RST_SE	62
+#define RST_RTCRST_SWRST_ONLY	63
+#define RST_CPUCORE0	64
+#define RST_CPUCORE1	65
+#define RST_CPUCORE2	66
+#define RST_CPUCORE3	67
+#define RST_DSIPHY	68
+#define RST_DSIPHYRST_APB	69
+#define RST_CSIPHY0	70
+#define RST_CSIPHY0RST_APB	71
+#define RST_CSIPHY1	72
+#define RST_CSIPHY1RST_APB	73
+#define RST_UART4	74
+#define RST_GPIO3	75
+#define RST_SYSTEM	76
+#define RST_TIMER	77
+#define RST_TIMER0	78
+#define RST_TIMER1	79
+#define RST_TIMER2	80
+#define RST_TIMER3	81
+#define RST_TIMER4	82
+#define RST_TIMER5	83
+#define RST_TIMER6	84
+#define RST_TIMER7	85
+#define RST_WGN0	86
+#define RST_WGN1	87
+#define RST_WGN2	88
+#define RST_KEYSCAN	89
+#define RST_SPIC1	90
+#define RST_AUDDAC	91
+#define RST_AUDDACRST_APB	92
+#define RST_AUDADC	93
+#define RST_AUDADCRST_APB	94
+#define RST_VCSYS	95
+#define RST_ETHPHY	96
+#define RST_ETHPHYRST_APB	97
+#define RST_AUDSRC	98
+#define RST_AUTO_CLEAR_CPUCORE0	99
+#define RST_AUTO_CLEAR_CPUCORE1	100
+#define RST_AUTO_CLEAR_CPUCORE2	101
+#define RST_AUTO_CLEAR_CPUCORE3	102
+#define RST_AUTO_CLEAR_MAINRST_AP	103
+#define RST_AUTO_CLEAR_SECONDRST_AP	104
+
+#define CLK_RST_A53		0
+#define CLK_RST_50M_A53		1
+#define CLK_RST_AHB_ROM		2
+#define CLK_RST_AXI_SRAM	3
+#define CLK_RST_DDR_AXI		4
+#define CLK_RST_EFUSE		5
+#define CLK_RST_APB_EFUSE	6
+#define CLK_RST_AXI_EMMC	7
+#define CLK_RST_EMMC		8
+#define CLK_RST_100K_EMMC	9
+#define CLK_RST_AXI_SD		10
+#define CLK_RST_SD		11
+#define CLK_RST_100K_SD		12
+#define CLK_RST_500M_ETH0	13
+#define CLK_RST_AXI_ETH0	14
+#define CLK_RST_500M_ETH1	15
+#define CLK_RST_AXI_ETH1	16
+#define CLK_RST_AXI_GDMA	17
+#define CLK_RST_APB_GPIO	18
+#define CLK_RST_APB_GPIO_INTR	19
+#define CLK_RST_GPIO_DB		20
+#define CLK_RST_AXI_MINER	21
+#define CLK_RST_AHB_SF		22
+#define CLK_RST_SDMA_AXI	23
+#define CLK_RST_SDMA_AUD	24
+#define CLK_RST_APB_I2C		25
+#define CLK_RST_APB_WDT		26
+#define CLK_RST_APB_JPEG	27
+#define CLK_RST_JPEG_AXI	28
+#define CLK_RST_AXI_NF		29
+#define CLK_RST_APB_NF		30
+#define CLK_RST_NF		31
+#define CLK_RST_APB_PWM		32
+#define CLK_RST_RV		33
+#define CLK_RST_APB_SPI		34
+#define CLK_RST_TPU_AXI		35
+#define CLK_RST_UART_500M	36
+#define CLK_RST_APB_UART	37
+#define CLK_RST_APB_I2S		38
+#define CLK_RST_AXI_USB		39
+#define CLK_RST_APB_USB		40
+#define CLK_RST_125M_USB	41
+#define CLK_RST_33K_USB		42
+#define CLK_RST_12M_USB		43
+#define CLK_RST_APB_VIDEO	44
+#define CLK_RST_VIDEO_AXI	45
+#define CLK_RST_VPP_AXI		46
+#define CLK_RST_APB_VPP		47
+#define CLK_RST_AXI1		48
+#define CLK_RST_AXI2		49
+#define CLK_RST_AXI3		50
+#define CLK_RST_AXI4		51
+#define CLK_RST_AXI5		52
+#define CLK_RST_AXI6		53
+
+#endif /* _DT_BINDINGS_RST_CV1835_H_ */
diff --git a/sys/contrib/device-tree/src/riscv/sophgo/cv181x_asic_bga.dtsi b/sys/contrib/device-tree/src/riscv/sophgo/cv181x_asic_bga.dtsi
new file mode 100644
index 00000000000000..93039e18278297
--- /dev/null
+++ b/sys/contrib/device-tree/src/riscv/sophgo/cv181x_asic_bga.dtsi
@@ -0,0 +1,56 @@
+&dac{
+	mute-gpio-l = <&porta 15 GPIO_ACTIVE_LOW>;
+	mute-gpio-r = <&porta 30 GPIO_ACTIVE_LOW>;
+};
+
+&spi0 {
+	status = "disabled";
+	num-cs = <1>;
+	spidev@0 {
+		compatible = "rohm,dh2228fv";
+		spi-max-frequency = <1000000>;
+		reg = <0>;
+	};
+};
+
+&spi1 {
+	status = "disabled";
+	num-cs = <1>;
+	spidev@0 {
+		compatible = "rohm,dh2228fv";
+		spi-max-frequency = <1000000>;
+		reg = <0>;
+	};
+};
+
+&spi2 {
+	status = "disabled";
+	num-cs = <1>;
+	spidev@0 {
+		compatible = "rohm,dh2228fv";
+		spi-max-frequency = <1000000>;
+		reg = <0>;
+	};
+};
+
+&spi3 {
+	status = "okay";
+	num-cs = <1>;
+	spidev@0 {
+		compatible = "rohm,dh2228fv";
+		spi-max-frequency = <1000000>;
+		reg = <0>;
+	};
+};
+
+&i2c1 {
+	status = "disabled";
+};
+
+/ {
+	/delete-node/ i2s@04110000;
+	/delete-node/ i2s@04120000;
+	/delete-node/ sound_ext1;
+	/delete-node/ sound_ext2;
+	/delete-node/ sound_PDM;
+};
diff --git a/sys/contrib/device-tree/src/riscv/sophgo/cv181x_asic_emmc.dtsi b/sys/contrib/device-tree/src/riscv/sophgo/cv181x_asic_emmc.dtsi
new file mode 100644
index 00000000000000..507a3a46b342a6
--- /dev/null
+++ b/sys/contrib/device-tree/src/riscv/sophgo/cv181x_asic_emmc.dtsi
@@ -0,0 +1,4 @@
+/ {
+	/delete-node/ cvi-spif@10000000;
+	/delete-node/ cv-spinf@4060000;
+};
diff --git a/sys/contrib/device-tree/src/riscv/sophgo/cv181x_asic_qfn.dtsi b/sys/contrib/device-tree/src/riscv/sophgo/cv181x_asic_qfn.dtsi
new file mode 100644
index 00000000000000..5d81e8c2cedcdc
--- /dev/null
+++ b/sys/contrib/device-tree/src/riscv/sophgo/cv181x_asic_qfn.dtsi
@@ -0,0 +1,120 @@
+&sd {
+	no-1-8-v;
+};
+
+&mipi_rx{
+	snsr-reset = <&portc 13 GPIO_ACTIVE_LOW>, <&portc 13 GPIO_ACTIVE_LOW>, <&portc 13 GPIO_ACTIVE_LOW>;
+};
+
+&mipi_tx {
+	reset-gpio = <&porta 15 GPIO_ACTIVE_LOW>;
+	pwm-gpio = <&porta 18 GPIO_ACTIVE_HIGH>;
+	power-ct-gpio = <&porta 19 GPIO_ACTIVE_HIGH>;
+};
+
+&dac{
+	mute-gpio-r = <&porte 2 GPIO_ACTIVE_LOW>;
+};
+
+&spi0 {
+	status = "disabled";
+	num-cs = <1>;
+	spidev@0 {
+		compatible = "rohm,dh2228fv";
+		spi-max-frequency = <1000000>;
+		reg = <0>;
+	};
+};
+
+&spi1 {
+	status = "disabled";
+	num-cs = <1>;
+	spidev@0 {
+		compatible = "rohm,dh2228fv";
+		spi-max-frequency = <1000000>;
+		reg = <0>;
+	};
+};
+
+&spi2 {
+	status = "disabled";
+	num-cs = <1>;
+	spidev@0 {
+	compatible = "rohm,dh2228fv";
+		spi-max-frequency = <1000000>;
+		reg = <0>;
+	};
+};
+
+&spi3 {
+	status = "okay";
+	num-cs = <1>;
+	spidev@0 {
+		compatible = "rohm,dh2228fv";
+		spi-max-frequency = <1000000>;
+		reg = <0>;
+	};
+};
+
+#ifndef CONFIG_PM
+&i2c0 {
+	/* FMUX_GPIO_REG iic_func_sel gpio_func_sel */
+	scl-pinmux = <0x03001070 0x0 0x3>;	// IIC0_SCL/IIC0_SCL/XGPIOA[28]
+	sda-pinmux = <0x03001074 0x0 0x3>;	// IIC0_SDA/IIC0_SDA/XGPIOA[29]
+	/* gpio port */
+	scl-gpios = <&porta 28 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&porta 29 GPIO_ACTIVE_HIGH>;
+};
+
+&i2c1 {
+	/* FMUX_GPIO_REG iic_func_sel gpio_func_sel */
+	scl-pinmux = <0x03009408 0x2 0x3>;	// SPI1_MOSI/IIC1_SCL/XGPIOB[7]
+	sda-pinmux = <0x0300940c 0x2 0x3>;	// SPI1_MISO/IIC1_SDA/XGPIOB[8]
+	/* gpio port */
+	scl-gpios = <&portb 7 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&portb 8 GPIO_ACTIVE_HIGH>;
+};
+
+&i2c2 {
+	/* FMUX_GPIO_REG iic_func_sel gpio_func_sel */
+	scl-pinmux = <0x030011a0 0x4 0x3>;	// PAD_MIPI_TXP1/IIC2_SCL/XGPIOC[15]
+	sda-pinmux = <0x0300119c 0x4 0x3>;	// PAD_MIPI_TXM1/IIC2_SDA/XGPIOC[14]
+	/* gpio port */
+	scl-gpios = <&portc 15 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&portc 14 GPIO_ACTIVE_HIGH>;
+};
+
+&i2c3 {
+	/* FMUX_GPIO_REG iic_func_sel gpio_func_sel */
+	scl-pinmux = <0x03001014 0x0 0x3>;	// IIC3_SCL/IIC3_SCL/XGPIOA[5]
+	sda-pinmux = <0x03001018 0x0 0x3>;	// IIC3_SDA/IIC3_SDA/XGPIOA[6]
+	/* gpio port */
+	scl-gpios = <&porta 5 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&porta 6 GPIO_ACTIVE_HIGH>;
+};
+
+&i2c4 {
+	/* FMUX_GPIO_REG iic_func_sel gpio_func_sel */
+	scl-pinmux = <0x030010f0 0x2 0x3>;	// ADC3/IIC4_SCL/XGPIOB[1]
+	sda-pinmux = <0x030010f4 0x2 0x3>;	// ADC2/IIC4_SDA/XGPIOB[2]
+	/* gpio port */
+	scl-gpios = <&portb 1 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&portb 2 GPIO_ACTIVE_HIGH>;
+};
+#endif
+
+/ {
+	/delete-node/ wifi-sd@4320000;
+	/delete-node/ i2s@04110000;
+	/delete-node/ i2s@04120000;
+	/delete-node/ sound_ext1;
+	/delete-node/ sound_ext2;
+	/delete-node/ sound_PDM;
+
+	wifi_pin {
+		compatible = "cvitek,wifi-pin";
+		poweron-gpio = <&porte 2 GPIO_ACTIVE_HIGH>;
+		wakeup-gpio = <&porte 6 GPIO_ACTIVE_HIGH>;
+	};
+
+};
diff --git a/sys/contrib/device-tree/src/riscv/sophgo/cv181x_asic_sd.dtsi b/sys/contrib/device-tree/src/riscv/sophgo/cv181x_asic_sd.dtsi
new file mode 100644
index 00000000000000..5af9620d863067
--- /dev/null
+++ b/sys/contrib/device-tree/src/riscv/sophgo/cv181x_asic_sd.dtsi
@@ -0,0 +1,4 @@
+/ {
+	/delete-node/ cv-emmc@4300000;
+	/delete-node/ cv-spinf@4060000;
+};
diff --git a/sys/contrib/device-tree/src/riscv/sophgo/cv181x_asic_spinand.dtsi b/sys/contrib/device-tree/src/riscv/sophgo/cv181x_asic_spinand.dtsi
new file mode 100644
index 00000000000000..2c3c6065caa3c0
--- /dev/null
+++ b/sys/contrib/device-tree/src/riscv/sophgo/cv181x_asic_spinand.dtsi
@@ -0,0 +1,5 @@
+/ {
+	/delete-node/ cvi-spif@10000000;
+	/delete-node/ cv-emmc@4300000;
+};
+
diff --git a/sys/contrib/device-tree/src/riscv/sophgo/cv181x_asic_spinor.dtsi b/sys/contrib/device-tree/src/riscv/sophgo/cv181x_asic_spinor.dtsi
new file mode 100644
index 00000000000000..cd125408284a1b
--- /dev/null
+++ b/sys/contrib/device-tree/src/riscv/sophgo/cv181x_asic_spinor.dtsi
@@ -0,0 +1,5 @@
+/ {
+	/delete-node/ cv-emmc@4300000;
+	/delete-node/ cv-spinf@4060000;
+};
+
diff --git a/sys/contrib/device-tree/src/riscv/sophgo/cv181x_base.dtsi b/sys/contrib/device-tree/src/riscv/sophgo/cv181x_base.dtsi
new file mode 100644
index 00000000000000..13747090dfa604
--- /dev/null
+++ b/sys/contrib/device-tree/src/riscv/sophgo/cv181x_base.dtsi
@@ -0,0 +1,932 @@
+
+/ {
+	compatible = "cvitek,cv181x";
+
+	#size-cells = <0x2>;
+	#address-cells = <0x2>;
+
+	top_misc:top_misc_ctrl@3000000 {
+		compatible = "syscon";
+		reg = <0x0 0x03000000 0x0 0x8000>;
+	};
+
+	clk_rst: clk-reset-controller {
+		#reset-cells = <1>;
+		compatible = "cvitek,clk-reset";
+		reg = <0x0 0x03002000 0x0 0x8>;
+	};
+
+	osc: oscillator {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+		clock-output-names = "osc";
+	};
+
+	clk: clock-controller {
+		compatible = "cvitek,cv181x-clk";
+		reg = <0x0 0x03002000 0x0 0x1000>;
+		clocks = <&osc>;
+		#clock-cells = <1>;
+	};
+
+	rst: reset-controller {
+		#reset-cells = <1>;
+		compatible = "cvitek,reset";
+		reg = <0x0 0x03003000 0x0 0x10>;
+	};
+
+	restart: restart-controller {
+		compatible = "cvitek,restart";
+		reg = <0x0 0x05025000 0x0 0x2000>;
+	};
+
+	tpu {
+		compatible = "cvitek,tpu";
+		reg-names = "tdma", "tiu";
+		reg = <0x0 0x0C100000 0x0 0x1000>,
+			  <0x0 0x0C101000 0x0 0x1000>;
+		clocks = <&clk CV181X_CLK_TPU>, <&clk CV181X_CLK_TPU_FAB>;
+		clock-names = "clk_tpu_axi", "clk_tpu_fab";
+		resets = <&rst RST_TDMA>, <&rst RST_TPU>, <&rst RST_TPUSYS>;
+		reset-names = "res_tdma", "res_tpu", "res_tpusys";
+	};
+
+	mon {
+		compatible = "cvitek,mon";
+		reg-names = "pcmon", "ddr_ctrl", "ddr_phyd", "ddr_aximon", "ddr_top";
+		reg = <0x0 0x01040000 0x0 0x1000>,
+					<0x0 0x08004000 0x0 0x1000>,
+					<0x0 0x08006000 0x0 0x1000>,
+					<0x0 0x08008000 0x0 0x1000>,
+					<0x0 0x0800A000 0x0 0x1000>;
+	};
+
+	wiegand0 {
+		compatible = "cvitek,wiegand";
+		reg-names = "wiegand";
+		reg = <0x0 0x03030000 0x0 0x1000>;
+		clocks = <&clk CV181X_CLK_WGN>, <&clk CV181X_CLK_WGN0>;
+		clock-names = "clk_wgn", "clk_wgn1";
+		resets = <&rst RST_WGN0>;
+		reset-names = "res_wgn";
+	};
+
+	wiegand1 {
+		compatible = "cvitek,wiegand";
+		reg-names = "wiegand";
+		reg = <0x0 0x03031000 0x0 0x1000>;
+		clocks = <&clk CV181X_CLK_WGN>, <&clk CV181X_CLK_WGN1>;
+		clock-names = "clk_wgn", "clk_wgn1";
+		resets = <&rst RST_WGN1>;
+		reset-names = "res_wgn";
+	};
+
+	wiegand2 {
+		compatible = "cvitek,wiegand";
+		reg-names = "wiegand";
+		reg = <0x0 0x03032000 0x0 0x1000>;
+		clocks = <&clk CV181X_CLK_WGN>, <&clk CV181X_CLK_WGN2>;
+		clock-names = "clk_wgn", "clk_wgn1";
+		resets = <&rst RST_WGN2>;
+		reset-names = "res_wgn";
+	};
+
+	saradc {
+		compatible = "cvitek,saradc";
+		reg-names = "top_domain_saradc", "rtc_domain_saradc";
+		reg = <0x0 0x030F0000 0x0 0x1000>, <0x0 0x0502c000 0x0 0x1000>;
+		clocks = <&clk CV181X_CLK_SARADC>;
+		clock-names = "clk_saradc";
+		resets = <&rst RST_SARADC>;
+		reset-names = "res_saradc";
+	};
+
+	rtc {
+		compatible = "cvitek,rtc";
+		reg = <0x0 0x05026000 0x0 0x1000>,<0x0 0x05025000 0x0 0x1000>;
+		clocks = <&clk CV181X_CLK_RTC_25M>;
+		clock-names = "clk_rtc";
+	};
+
+	cvitek-ion {
+		compatible = "cvitek,cvitek-ion";
+
+		heap_carveout@0 {
+			compatible = "cvitek,carveout";
+			memory-region = <&ion_reserved>;
+		};
+	};
+
+	sysdma_remap {
+		compatible = "cvitek,sysdma_remap";
+		reg = <0x0 0x03000154 0x0 0x10>;
+		ch-remap = <CVI_I2S0_RX CVI_I2S2_TX CVI_I2S1_RX CVI_I2S1_TX
+					CVI_SPI_NAND CVI_SPI_NAND CVI_I2S2_RX CVI_I2S3_TX>;
+		int_mux_base = <0x03000298>;
+	};
+
+	dmac: dma@0x4330000 {
+		compatible = "snps,dmac-bm";
+		reg = <0x0 0x04330000 0x0 0x1000>;
+		clock-names = "clk_sdma_axi";
+		clocks = <&clk CV181X_CLK_SDMA_AXI>;
+
+		dma-channels = /bits/ 8 <8>;
+		#dma-cells = <3>;
+		dma-requests = /bits/ 8 <16>;
+		chan_allocation_order = /bits/ 8 <0>;
+		chan_priority = /bits/ 8 <1>;
+		block_size = <1024>;
+		dma-masters = /bits/ 8 <2>;
+		data-width = <4 4>; /* bytes */
+		axi_tr_width = <4>; /* bytes */
+		block-ts = <15>;
+	};
+
+
+	watchdog0: cv-wd@0x3010000 {
+		compatible = "snps,dw-wdt";
+		reg = <0x0 0x03010000 0x0 0x1000>;
+		resets = <&rst RST_WDT>;
+		clocks = <&pclk>;
+	};
+
+	pwm0: pwm@3060000 {
+		compatible = "cvitek,cvi-pwm";
+		reg = <0x0 0x3060000 0x0 0x1000>;
+		clocks = <&clk CV181X_CLK_PWM>;
+		#pwm-cells = <1>;
+	};
+
+	pwm1: pwm@3061000 {
+		compatible = "cvitek,cvi-pwm";
+		reg = <0x0 0x3061000 0x0 0x1000>;
+		clocks = <&clk CV181X_CLK_PWM>;
+		#pwm-cells = <2>;
+	};
+
+	pwm2: pwm@3062000 {
+		compatible = "cvitek,cvi-pwm";
+		reg = <0x0 0x3062000 0x0 0x1000>;
+		clocks = <&clk CV181X_CLK_PWM>;
+		#pwm-cells = <3>;
+	};
+
+	pwm3: pwm@3063000 {
+		compatible = "cvitek,cvi-pwm";
+		reg = <0x0 0x3063000 0x0 0x1000>;
+		clocks = <&clk CV181X_CLK_PWM>;
+		#pwm-cells = <4>;
+	};
+
+	pclk: pclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+	};
+
+	spinand:cv-spinf@4060000 {
+		compatible = "cvitek,cv1835-spinf";
+		reg = <0x0 0x4060000 0x0 0x1000>;
+		reg-names = "core_mem";
+		bus-width = <4>;
+		dmas = <&dmac 4 1 1
+			&dmac 5 1 1>;
+		dma-names = "rx","tx";
+	};
+
+	spif:cvi-spif@10000000 {
+		compatible = "cvitek,cvi-spif";
+		bus-num = <0>;
+		reg = <0x0 0x10000000 0x0 0x10000000>;
+		reg-names = "spif";
+		sck-div = <3>;
+		sck_mhz = <300>;
+		spi-max-frequency = <75000000>;
+		spiflash {
+			compatible = "jedec,spi-nor";
+			spi-rx-bus-width = <4>;
+			spi-tx-bus-width = <4>;
+		};
+	};
+
+	spi0:spi0@04180000 {
+		compatible = "snps,dw-apb-ssi";
+		reg = <0x0 0x04180000 0x0 0x10000>;
+		clocks = <&clk CV181X_CLK_SPI>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	spi1:spi1@04190000 {
+		compatible = "snps,dw-apb-ssi";
+		reg = <0x0 0x04190000 0x0 0x10000>;
+		clocks = <&clk CV181X_CLK_SPI>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	spi2:spi2@041A0000 {
+		compatible = "snps,dw-apb-ssi";
+		reg = <0x0 0x041A0000 0x0 0x10000>;
+		clocks = <&clk CV181X_CLK_SPI>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	spi3:spi3@041B0000 {
+		compatible = "snps,dw-apb-ssi";
+		reg = <0x0 0x041B0000 0x0 0x10000>;
+		clocks = <&clk CV181X_CLK_SPI>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+#if 0
+		dmas = <&dmac 2 1 1
+			&dmac 3 1 1>;
+		dma-names = "rx", "tx";
+		capability = "txrx";
+#endif
+	};
+
+	uart0: serial@04140000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x0 0x04140000 0x0 0x1000>;
+		clock-frequency = <25000000>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "okay";
+	};
+
+	uart1: serial@04150000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x0 0x04150000 0x0 0x1000>;
+		clock-frequency = <25000000>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart2: serial@04160000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x0 0x04160000 0x0 0x1000>;
+		clock-frequency = <25000000>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart3: serial@04170000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x0 0x04170000 0x0 0x1000>;
+		clock-frequency = <25000000>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	uart4: serial@041C0000 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x0 0x041C0000 0x0 0x1000>;
+		clock-frequency = <25000000>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		status = "disabled";
+	};
+
+	gpio0: gpio@03020000 {
+		compatible = "snps,dw-apb-gpio";
+		reg = <0x0 0x03020000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		porta: gpio-controller@0 {
+			compatible = "snps,dw-apb-gpio-port";
+			bank-name = "porta";
+			gpio-controller;
+			#gpio-cells = <2>;
+			snps,nr-gpios = <32>;
+			reg = <0>;
+		};
+	};
+
+	gpio1: gpio@03021000 {
+		compatible = "snps,dw-apb-gpio";
+		reg = <0x0 0x03021000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		portb: gpio-controller@1 {
+			compatible = "snps,dw-apb-gpio-port";
+			bank-name = "portb";
+			gpio-controller;
+			#gpio-cells = <2>;
+			snps,nr-gpios = <32>;
+			reg = <0>;
+		};
+	};
+
+	gpio2: gpio@03022000 {
+		compatible = "snps,dw-apb-gpio";
+		reg = <0x0 0x03022000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		portc: gpio-controller@2 {
+			compatible = "snps,dw-apb-gpio-port";
+			bank-name = "portc";
+			gpio-controller;
+			#gpio-cells = <2>;
+			snps,nr-gpios = <32>;
+			reg = <0>;
+		};
+	};
+
+	gpio3: gpio@03023000 {
+		compatible = "snps,dw-apb-gpio";
+		reg = <0x0 0x03023000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		portd: gpio-controller@3 {
+			compatible = "snps,dw-apb-gpio-port";
+			bank-name = "portd";
+			gpio-controller;
+			#gpio-cells = <2>;
+			snps,nr-gpios = <32>;
+			reg = <0>;
+		};
+	};
+
+	gpio4: gpio@05021000 {
+		compatible = "snps,dw-apb-gpio";
+		reg = <0x0 0x05021000 0x0 0x1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		porte: gpio-controller@4 {
+			compatible = "snps,dw-apb-gpio-port";
+			bank-name = "porte";
+			gpio-controller;
+			#gpio-cells = <2>;
+			snps,nr-gpios = <32>;
+			reg = <0>;
+		};
+	};
+
+	i2c0: i2c@04000000 {
+		compatible = "snps,designware-i2c";
+		clocks = <&clk CV181X_CLK_I2C>;
+		reg = <0x0 0x04000000 0x0 0x1000>;
+		clock-frequency = <400000>;
+
+		#size-cells = <0x0>;
+		#address-cells = <0x1>;
+		resets = <&rst RST_I2C0>;
+		reset-names = "i2c0";
+	};
+
+	i2c1: i2c@04010000 {
+		compatible = "snps,designware-i2c";
+		clocks = <&clk CV181X_CLK_I2C>;
+		reg = <0x0 0x04010000 0x0 0x1000>;
+		clock-frequency = <400000>;
+
+		#size-cells = <0x0>;
+		#address-cells = <0x1>;
+		resets = <&rst RST_I2C1>;
+		reset-names = "i2c1";
+	};
+
+	i2c2: i2c@04020000 {
+		compatible = "snps,designware-i2c";
+		clocks = <&clk CV181X_CLK_I2C>;
+		reg = <0x0 0x04020000 0x0 0x1000>;
+		clock-frequency = <100000>;
+		resets = <&rst RST_I2C2>;
+		reset-names = "i2c2";
+	};
+
+	i2c3: i2c@04030000 {
+		compatible = "snps,designware-i2c";
+		clocks = <&clk CV181X_CLK_I2C>;
+		reg = <0x0 0x04030000 0x0 0x1000>;
+		clock-frequency = <400000>;
+		resets = <&rst RST_I2C3>;
+		reset-names = "i2c3";
+	};
+
+	i2c4: i2c@04040000 {
+		compatible = "snps,designware-i2c";
+		clocks = <&clk CV181X_CLK_I2C>;
+		reg = <0x0 0x04040000 0x0 0x1000>;
+		clock-frequency = <400000>;
+		resets = <&rst RST_I2C4>;
+		reset-names = "i2c4";
+	};
+
+	eth_csrclk: eth_csrclk {
+		clock-output-names = "eth_csrclk";
+		clock-frequency = <250000000>;
+		#clock-cells = <0x0>;
+		compatible = "fixed-clock";
+	};
+
+	eth_ptpclk: eth_ptpclk {
+		clock-output-names = "eth_ptpclk";
+		clock-frequency = <50000000>;
+		#clock-cells = <0x0>;
+		compatible = "fixed-clock";
+	};
+
+	stmmac_axi_setup: stmmac-axi-config {
+		snps,wr_osr_lmt = <1>;
+		snps,rd_osr_lmt = <2>;
+		snps,blen = <4 8 16 0 0 0 0>;
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <1>;
+		queue0 {};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <1>;
+		queue0 {};
+	};
+
+	ethernet0: ethernet@4070000 {
+		compatible = "cvitek,ethernet";
+		reg = <0x0 0x04070000 0x0 0x10000>;
+		clock-names = "stmmaceth", "ptp_ref";
+		clocks = <&eth_csrclk>, <&eth_ptpclk>;
+		//phy-reset-gpios = <&porta 26 0>;
+
+		tx-fifo-depth = <8192>;
+		rx-fifo-depth = <8192>;
+		/* no hash filter and perfect filter support */
+		snps,multicast-filter-bins = <0>;
+		snps,perfect-filter-entries = <1>;
+
+		snps,txpbl = <8>;
+		snps,rxpbl = <8>;
+		snps,aal;
+
+		snps,axi-config = <&stmmac_axi_setup>;
+		snps,mtl-rx-config = <&mtl_rx_setup>;
+		snps,mtl-tx-config = <&mtl_tx_setup>;
+
+		phy-mode = "rmii";
+	};
+
+	emmc:cv-emmc@4300000 {
+		compatible = "cvitek,cv181x-emmc";
+		reg = <0x0 0x4300000 0x0 0x1000>;
+		reg-names = "core_mem";
+		bus-width = <4>;
+		non-removable;
+		no-sdio;
+		no-sd;
+		src-frequency = <375000000>;
+		min-frequency = <400000>;
+		max-frequency = <200000000>;
+		64_addressing;
+		reset_tx_rx_phy;
+		pll_index = <0x5>;
+		pll_reg = <0x3002064>;
+	};
+
+	sd:cv-sd@4310000 {
+		compatible = "cvitek,cv181x-sd";
+		reg = <0x0 0x4310000 0x0 0x1000>;
+		reg-names = "core_mem";
+		bus-width = <4>;
+		cap-sd-highspeed;
+		cap-mmc-highspeed;
+		sd-uhs-sdr12;
+		sd-uhs-sdr25;
+		sd-uhs-sdr50;
+		sd-uhs-sdr104;
+		no-sdio;
+		no-mmc;
+		/*no-1-8-v;*/
+		src-frequency = <375000000>;
+		min-frequency = <400000>;
+		max-frequency = <200000000>;
+		64_addressing;
+		reset_tx_rx_phy;
+		reset-names = "sdhci";
+		pll_index = <0x6>;
+		pll_reg = <0x3002070>;
+		cvi-cd-gpios = <&porta 13 GPIO_ACTIVE_LOW>;
+	};
+
+	wifisd:wifi-sd@4320000 {
+		compatible = "cvitek,cv181x-sdio";
+		bus-width = <4>;
+		reg = <0x0 0x4320000 0x0 0x1000>;
+		reg_names = "core_mem";
+		src-frequency = <375000000>;
+		min-frequency = <400000>;
+		max-frequency = <50000000>;
+		64_addressing;
+		reset_tx_rx_phy;
+		non-removable;
+		pll_index = <0x7>;
+		pll_reg = <0x300207C>;
+		no-mmc;
+		no-sd;
+		status = "disabled";
+	};
+
+	i2s_mclk: i2s_mclk {
+		clock-output-names = "i2s_mclk";
+		clock-frequency = <24576000>;
+		#clock-cells = <0x0>;
+		compatible = "fixed-clock";
+	};
+
+	i2s_subsys {
+		compatible = "cvitek,i2s_tdm_subsys";
+		reg = <0x0 0x04108000 0x0 0x100>;
+		clocks = <&i2s_mclk>, <&clk CV181X_CLK_A0PLL>,
+			<&clk CV181X_CLK_SDMA_AUD0>, <&clk CV181X_CLK_SDMA_AUD1>,
+			<&clk CV181X_CLK_SDMA_AUD2>, <&clk CV181X_CLK_SDMA_AUD3>;
+		clock-names = "i2sclk", "clk_a0pll",
+			"clk_sdma_aud0", "clk_sdma_aud1",
+			"clk_sdma_aud2", "clk_sdma_aud3";
+		master_base = <0x04110000>; /* I2S1 is master, only useful while using multi I2S IPs work on same IO */
+	};
+
+	i2s0: i2s@04100000 {
+		compatible = "cvitek,cv1835-i2s";
+		reg = <0x0 0x04100000 0x0 0x2000>;
+		clocks = <&i2s_mclk 0>;
+		clock-names = "i2sclk";
+		dev-id = <0>;
+		#sound-dai-cells = <0>;
+		dmas = <&dmac 0 1 1>; /* read channel */
+		dma-names = "rx";
+		capability = "rx"; /* I2S0 connect to internal ADC as RX */
+		mclk_out = "false";
+	};
+
+	i2s1: i2s@04110000 {
+		compatible = "cvitek,cv1835-i2s";
+		reg = <0x0 0x04110000 0x0 0x2000>;
+		clocks = <&i2s_mclk 0>;
+		clock-names = "i2sclk";
+		dev-id = <1>;
+		#sound-dai-cells = <0>;
+		dmas = <&dmac 2 1 1 /* read channel */
+			&dmac 3 1 1>; /* write channel */
+		dma-names = "rx", "tx";
+		capability = "txrx";
+		mclk_out = "false";
+	};
+
+	i2s2: i2s@04120000 {
+		compatible = "cvitek,cv1835-i2s";
+		reg = <0x0 0x04120000 0x0 0x2000>;
+		clocks = <&i2s_mclk 0>;
+		clock-names = "i2sclk";
+		dev-id = <2>;
+		#sound-dai-cells = <0>;
+		dmas = <&dmac 6 1 1 /* read channel */
+			&dmac 1 1 1>; /* write channel */
+		dma-names = "rx", "tx";
+		capability = "txrx";
+		mclk_out = "false";
+
+	};
+
+	i2s3: i2s@04130000 {
+		compatible = "cvitek,cv1835-i2s";
+		reg = <0x0 0x04130000 0x0 0x2000>;
+		clocks = <&i2s_mclk 0>;
+		clock-names = "i2sclk";
+		dev-id = <3>;
+		#sound-dai-cells = <0>;
+		dmas = <&dmac 7 1 1>; /* write channel */
+		dma-names = "tx";
+		capability = "tx"; /* I2S3 connect to internal DAC as TX */
+		mclk_out = "true";
+	};
+
+	adc: adc@0300A100 {
+		compatible = "cvitek,cv182xaadc";
+		reg = <0x0 0x0300A100 0x0 0x100>;
+		clocks = <&i2s_mclk 0>;
+		clock-names = "i2sclk";
+		clk_source = <0x04130000>; /* MCLK source is I2S3 */
+	};
+
+	dac: dac@0300A000 {
+		compatible = "cvitek,cv182xadac";
+		reg = <0x0 0x0300A000 0x0 0x100>;
+		clocks = <&i2s_mclk 0>;
+		clock-names = "i2sclk";
+	};
+
+	pdm: pdm@0x041D0C00 {
+		compatible = "cvitek,cv1835pdm";
+		reg = <0x0 0x041D0C00 0x0 0x100>;
+		clocks = <&i2s_mclk 0>;
+		clock-names = "i2sclk";
+	};
+
+	sound_adc {
+		compatible = "cvitek,cv182xa-adc";
+		cvi,model = "CV182XA";
+		cvi,card_name = "cv182xa_adc";
+	};
+
+	sound_dac {
+		compatible = "cvitek,cv182xa-dac";
+		cvi,model = "CV182XA";
+		cvi,card_name = "cv182xa_dac";
+	};
+
+	sound_PDM {
+		compatible = "cvitek,cv182x-pdm";
+		cvi,model = "CV182X";
+		cvi,card_name = "cv182x_internal_PDM";
+	};
+
+	wifi_pin {
+		compatible = "cvitek,wifi-pin";
+		poweron-gpio = <&porta 18 GPIO_ACTIVE_HIGH>;
+		wakeup-gpio = <&porte 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	bt_pin {
+		compatible = "cvitek,bt-pin";
+		poweron-gpio = <&porte 9 GPIO_ACTIVE_HIGH>;
+	};
+
+	mipi_rx: cif {
+		compatible = "cvitek,cif";
+		reg = <0x0 0x0a0c2000 0x0 0x2000>, <0x0 0x0a0d0000 0x0 0x1000>,
+		      <0x0 0x0a0c4000 0x0 0x2000>, <0x0 0x0a0c6000 0x0 0x2000>,
+		      <0x0 0x03001c30 0x0 0x30>;
+		reg-names = "csi_mac0", "csi_wrap0", "csi_mac1", "csi_mac2", "pad_ctrl";
+		snsr-reset = <&porta 2 GPIO_ACTIVE_LOW>, <&porta 2 GPIO_ACTIVE_LOW>, <&porta 2 GPIO_ACTIVE_LOW>;
+		resets = <&rst RST_CSIPHY0>, <&rst RST_CSIPHY1>,
+			<&rst RST_CSIPHY0RST_APB>, <&rst RST_CSIPHY1RST_APB>;
+		reset-names = "phy0", "phy1", "phy-apb0", "phy-apb1";
+		clocks = <&clk CV181X_CLK_CAM0>, <&clk CV181X_CLK_CAM1>, <&clk CV181X_CLK_SRC_VIP_SYS_2>,
+			 <&clk CV181X_CLK_MIPIMPLL>, <&clk CV181X_CLK_DISPPLL>, <&clk CV181X_CLK_FPLL>;
+		clock-names = "clk_cam0", "clk_cam1", "clk_sys_2",
+			      "clk_mipimpll", "clk_disppll", "clk_fpll";
+	};
+
+	mipi_tx: mipi_tx {
+		compatible = "cvitek,mipi_tx";
+		reset-gpio = <&porte 2 GPIO_ACTIVE_LOW>;
+		pwm-gpio = <&porte 0 GPIO_ACTIVE_HIGH>;
+		power-ct-gpio = <&porte 1 GPIO_ACTIVE_HIGH>;
+		clocks = <&clk CV181X_CLK_DISP_VIP>, <&clk CV181X_CLK_DSI_MAC_VIP>;
+		clock-names = "clk_disp", "clk_dsi";
+	};
+
+	sys {
+		compatible = "cvitek,sys";
+	};
+
+	base {
+		compatible = "cvitek,base";
+		reg = <0x0 0x0a0c8000 0x0 0x20>;
+		reg-names = "vip_sys";
+	};
+
+	vi {
+		compatible = "cvitek,vi";
+		reg = <0x0 0x0a000000 0x0 0x80000>;
+		clocks = <&clk CV181X_CLK_SRC_VIP_SYS_0>, <&clk CV181X_CLK_SRC_VIP_SYS_1>,
+				<&clk CV181X_CLK_SRC_VIP_SYS_2>, <&clk CV181X_CLK_SRC_VIP_SYS_3>,
+				<&clk CV181X_CLK_AXI_VIP>, <&clk CV181X_CLK_CSI_BE_VIP>,
+				<&clk CV181X_CLK_RAW_VIP>, <&clk CV181X_CLK_ISP_TOP_VIP>,
+				<&clk CV181X_CLK_CSI_MAC0_VIP>, <&clk CV181X_CLK_CSI_MAC1_VIP>,
+				<&clk CV181X_CLK_CSI_MAC2_VIP>;
+		clock-names = "clk_sys_0", "clk_sys_1", "clk_sys_2", "clk_sys_3",
+					"clk_axi", "clk_csi_be", "clk_raw", "clk_isp_top",
+					"clk_csi_mac0", "clk_csi_mac1", "clk_csi_mac2";
+		clock-freq-vip-sys1 = <300000000>;
+	};
+
+	vpss {
+		compatible = "cvitek,vpss";
+		reg = <0x0 0x0a080000 0x0 0x10000>, <0x0 0x0a0d1000 0x0 0x100>;
+		reg-names = "sc";
+		clocks = <&clk CV181X_CLK_SRC_VIP_SYS_0>,	<&clk CV181X_CLK_SRC_VIP_SYS_1>,
+			<&clk CV181X_CLK_SRC_VIP_SYS_2>, <&clk CV181X_CLK_IMG_D_VIP>,
+			<&clk CV181X_CLK_IMG_V_VIP>, <&clk CV181X_CLK_SC_TOP_VIP>,
+			<&clk CV181X_CLK_SC_D_VIP>, <&clk CV181X_CLK_SC_V1_VIP>,
+			<&clk CV181X_CLK_SC_V2_VIP>, <&clk CV181X_CLK_SC_V3_VIP>;
+		clock-names = "clk_sys_0", "clk_sys_1",
+			"clk_sys_2", "clk_img_d",
+			"clk_img_v", "clk_sc_top",
+			"clk_sc_d", "clk_sc_v1",
+			"clk_sc_v2", "clk_sc_v3";
+		clock-freq-vip-sys1 = <300000000>;
+	};
+
+	ive {
+		compatible = "cvitek,ive";
+		reg = <0x0 0x0A0A0000 0x0 0x3100>;
+		reg-names = "ive_base";
+	};
+
+	vo:vo {
+		compatible = "cvitek,vo";
+		reg = <0x0 0x0a080000 0x0 0x10000>, <0x0 0x0a0c8000 0x0 0xa0>, <0x0 0x0a0d1000 0x0 0x100>;
+		reg-names = "sc", "vip_sys", "dphy";
+		clocks = <&clk CV181X_CLK_DISP_VIP>, <&clk CV181X_CLK_DSI_MAC_VIP>, <&clk CV181X_CLK_BT_VIP>;
+		reset-gpio = <&porte 2 GPIO_ACTIVE_LOW>;
+		pwm-gpio = <&porte 0 GPIO_ACTIVE_HIGH>;
+		power-ct-gpio = <&porte 1 GPIO_ACTIVE_HIGH>;
+		clock-names = "clk_disp", "clk_dsi", "clk_bt";
+	};
+
+#if (CVIMMAP_FRAMEBUFFER_SIZE > 0)
+	reserved-memory {
+	  #size-cells = <0x2>;
+	  #address-cells = <0x2>;
+	  ranges;
+
+		fb_reserved: cvifb {
+			alloc-ranges = <0x0 CVIMMAP_FRAMEBUFFER_ADDR 0 CVIMMAP_FRAMEBUFFER_SIZE>;
+			size = <0x0 CVIMMAP_FRAMEBUFFER_SIZE>;
+		};
+	};
+
+	cvifb {
+		compatible = "cvitek,fb";
+		memory-region = <&fb_reserved>;
+		reg = <0x0 0x0a088000 0x0 0x1000>;
+		reg-names = "disp";
+	};
+#endif
+	dwa {
+		compatible = "cvitek,dwa";
+		reg = <0x0 0x0a0c0000 0x0 0x1000>;
+		reg-names = "dwa";
+		clocks = <&clk CV181X_CLK_SRC_VIP_SYS_0>, <&clk CV181X_CLK_SRC_VIP_SYS_1>,
+			<&clk CV181X_CLK_SRC_VIP_SYS_2>, <&clk CV181X_CLK_SRC_VIP_SYS_3>,
+			<&clk CV181X_CLK_SRC_VIP_SYS_4>, <&clk CV181X_CLK_DWA_VIP>;
+		clock-names = "clk_sys_0", "clk_sys_1",
+			"clk_sys_2", "clk_sys_3",
+			"clk_sys_4", "clk_dwa";
+		clock-freq-vip-sys1 = <300000000>;
+	};
+
+	rgn {
+		compatible = "cvitek,rgn";
+	};
+
+	vcodec {
+		compatible = "cvitek,asic-vcodec";
+		reg = <0x0 0x0B020000 0x0 0x10000>,<0x0 0x0B010000 0x0 0x10000>,<0x0 0x0B030000 0x0 0x100>,
+		      <0x0 0x0B058000 0x0 0x100>,<0x0 0x0B050000 0x0 0x400>;
+		reg-names = "h265","h264","vc_ctrl","vc_sbm","vc_addr_remap";
+		clocks = <&clk CV181X_CLK_AXI_VIDEO_CODEC>,
+			<&clk CV181X_CLK_H264C>, <&clk CV181X_CLK_APB_H264C>,
+			<&clk CV181X_CLK_H265C>, <&clk CV181X_CLK_APB_H265C>,
+			<&clk CV181X_CLK_VC_SRC0>, <&clk CV181X_CLK_VC_SRC1>,
+			<&clk CV181X_CLK_VC_SRC2>, <&clk CV181X_CLK_CFG_REG_VC>;
+		clock-names = "clk_axi_video_codec",
+			"clk_h264c", "clk_apb_h264c",
+			"clk_h265c", "clk_apb_h265c",
+			"clk_vc_src0", "clk_vc_src1",
+			"clk_vc_src2", "clk_cfg_reg_vc";
+	};
+
+	jpu {
+		compatible = "cvitek,asic-jpeg";
+		reg = <0x0 0x0B000000 0x0 0x300>,<0x0 0x0B030000 0x0 0x100>,<0x0 0x0B058000 0x0 0x100>;
+		reg-names = "jpeg","vc_ctrl","vc_sbm";
+		clocks = <&clk CV181X_CLK_AXI_VIDEO_CODEC>,
+			<&clk CV181X_CLK_JPEG>, <&clk CV181X_CLK_APB_JPEG>,
+			<&clk CV181X_CLK_VC_SRC0>, <&clk CV181X_CLK_VC_SRC1>,
+			<&clk CV181X_CLK_VC_SRC2>, <&clk CV181X_CLK_CFG_REG_VC>;
+		clock-names = "clk_axi_video_codec",
+			"clk_jpeg", "clk_apb_jpeg",
+			"clk_vc_src0", "clk_vc_src1",
+			"clk_vc_src2", "clk_cfg_reg_vc";
+		resets = <&rst RST_JPEG>;
+		reset-names = "jpeg";
+	};
+
+	cvi_vc_drv {
+		compatible = "cvitek,cvi_vc_drv";
+		reg = <0x0 0x0B030000 0x0 0x100>,<0x0 0x0B058000 0x0 0x100>,<0x0 0x0B050000 0x0 0x400>;
+		reg-names = "vc_ctrl","vc_sbm","vc_addr_remap";
+	};
+
+	rtos_cmdqu {
+		compatible = "cvitek,rtos_cmdqu";
+		reg = <0x0 0x01900000 0x0 0x1000>;
+		reg-names = "mailbox";
+	};
+
+	usb: usb@04340000 {
+		compatible = "cvitek,cv182x-usb";
+		reg = <0x0 0x04340000 0x0 0x10000>,
+			<0x0 0x03006000 0x0 0x58>;	//USB 2.0 PHY
+		dr_mode = "otg";
+		g-use-dma;
+		g-rx-fifo-size = <536>;
+		g-np-tx-fifo-size = <32>;
+		g-tx-fifo-size = <768 512 512 384 128 128>;
+		clocks = <&clk CV181X_CLK_AXI4_USB>,
+				<&clk CV181X_CLK_APB_USB>,
+				<&clk CV181X_CLK_125M_USB>,
+				<&clk CV181X_CLK_33K_USB>,
+				<&clk CV181X_CLK_12M_USB>;
+		clock-names = "clk_axi", "clk_apb", "clk_125m", "clk_33k", "clk_12m";
+		vbus-gpio = <&portb 6 0>;
+		status = "okay";
+	};
+
+	thermal:thermal@030E0000 {
+		compatible = "cvitek,cv181x-thermal";
+		reg = <0x0 0x030E0000 0x0 0x10000>;
+		clocks = <&clk CV181X_CLK_TEMPSEN>;
+		clock-names = "clk_tempsen";
+		reset-names = "tempsen";
+		#thermal-sensor-cells = <1>;
+	};
+
+	thermal-zones {
+		soc_thermal_0: soc_thermal_0 {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+			thermal-sensors = <&thermal 0>;
+
+			trips {
+				soc_thermal_trip_0: soc_thermal_trip_0 {
+					temperature = <100000>; /* millicelsius */
+					hysteresis = <5000>; /* millicelsius */
+					type = "passive";
+				};
+
+				soc_thermal_trip_1: soc_thermal_trip_1 {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <5000>; /* millicelsius */
+					type = "passive";
+				};
+
+				soc_thermal_crtical_0: soc_thermal_crtical_0 {
+					temperature = <130000>; /* millicelsius */
+					hysteresis = <0>; /* millicelsius */
+					type = "critical";
+				};
+			};
+		};
+	};
+
+#if 0
+	cvipctrl: pinctrl@3001000 {
+		compatible = "cvitek,pinctrl-cv182x";
+		reg = <0 0x03001000 0 0x1000>;
+	};
+#endif
+
+	cviaudio_core {
+		compatible = "cvitek,audio";
+	};
+
+	audio_clock: audio_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+#if 0
+		clock-frequency = <12288000>;
+#else
+		clock-frequency = <24576000>;
+#endif
+		};
+
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		//spi0 = &spi0;
+		//spi1 = &spi1;
+		//spi2 = &spi2;
+		//spi3 = &spi3;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+		ethernet0 = &ethernet0;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+};
+
diff --git a/sys/contrib/device-tree/src/riscv/sophgo/cv181x_base_arm.dtsi b/sys/contrib/device-tree/src/riscv/sophgo/cv181x_base_arm.dtsi
new file mode 100644
index 00000000000000..2993b9da32b271
--- /dev/null
+++ b/sys/contrib/device-tree/src/riscv/sophgo/cv181x_base_arm.dtsi
@@ -0,0 +1,320 @@
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/reset/cv181x-resets.h>
+#include <dt-bindings/clock/cv181x-clock.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/dma/cv181x-dmamap.h>
+#include "cv181x_base.dtsi"
+
+/ {
+	model = "Cvitek. CV181X ASIC. ARM.";
+	interrupt-parent = <&gic>;
+
+	#size-cells = <0x2>;
+	#address-cells = <0x2>;
+
+	gic: interrupt-controller {
+		compatible = "arm,cortex-a15-gic";
+		ranges;
+		#size-cells = <0x2>;
+		#address-cells = <0x2>;
+		interrupt-controller;
+		#interrupt-cells = <0x3>;
+		reg = <0x0 0x01F01000 0x0 0x1000>,
+		      <0x0 0x01F02000 0x0 0x2000>;
+	};
+
+	pmu_a53 {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&A53_0>;
+	};
+
+	psci {
+		migrate = <0xc4000005>;
+		cpu_on = <0xc4000003>;
+		cpu_off = <0x84000002>;
+		cpu_suspend = <0xc4000001>;
+		sys_poweroff = <0x84000008>;
+		sys_reset = <0x84000009>;
+		method = "smc";
+		compatible = "arm,psci-0.2", "arm,psci";
+	};
+
+	cpus {
+		#size-cells = <0x0>;
+		#address-cells = <0x1>;
+
+		A53_0: cpu@0 {
+			reg = <0x0>;
+			enable-method = "psci";
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			next-level-cache = <&CA53_L2>;
+		};
+
+		CA53_L2: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	timer {
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		always-on;
+		clock-frequency = <25000000>;
+		compatible = "arm,armv8-timer";
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	cv181x_cooling:cv181x_cooling {
+		clocks = <&clk CV181X_CLK_A53>, <&clk CV181X_CLK_TPU>;
+		clock-names = "clk_cpu", "clk_tpu_axi";
+		dev-freqs = <800000000 500000000>,
+			<400000000 375000000>,
+			<400000000 300000000>;
+		compatible = "cvitek,cv181x-cooling";
+		#cooling-cells = <2>;
+	};
+
+	tpu {
+		interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 60 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	mon {
+		interrupts = <GIC_SPI 77 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	wiegand0 {
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	wiegand1 {
+		interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	wiegand2 {
+		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	saradc {
+		interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	rtc {
+		interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	sysdma_remap {
+		int_mux = <0x1FF>; /* enable bit [0..8] for CPU0(CA53) */
+	};
+
+	dmac: dma@0x4330000 {
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+#if 0
+	watchdog0: cv-wd@0x3010000 {
+		interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+	};
+#endif
+	trng: dw_trng@0x02070000 {
+		reg = <0x0 0x02070000 0x0 0x1000>;
+		compatible = "snps,dw-trng";
+	};
+	
+	spinand:cv-spinf@4060000 {
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	spif:cvi-spif@10000000 {
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	spi0:spi0@04180000 {
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	spi1:spi1@04190000 {
+		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	spi2:spi2@041A0000 {
+		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	spi3:spi3@041B0000 {
+		interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	uart0: serial@04140000 {
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	uart1: serial@04150000 {
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	uart2: serial@04160000 {
+		interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	uart3: serial@04170000 {
+		interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	uart4: serial@041C0000 {
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpio0: gpio@03020000 {
+		porta: gpio-controller@0 {
+			interrupt-controller;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	gpio1: gpio@03021000 {
+		portb: gpio-controller@1 {
+			interrupt-controller;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	gpio2: gpio@03022000 {
+		portc: gpio-controller@2 {
+			interrupt-controller;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	gpio3: gpio@03023000 {
+		portd: gpio-controller@3 {
+			interrupt-controller;
+			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	gpio4: gpio@05021000 {
+		porte: gpio-controller@4 {
+			interrupt-controller;
+			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	i2c0: i2c@04000000 {
+		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	i2c1: i2c@04010000 {
+		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	i2c2: i2c@04020000 {
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	i2c3: i2c@04030000 {
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	i2c4: i2c@04040000 {
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	ethernet0: ethernet@4070000 {
+		interrupt-names = "macirq";
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	emmc:cv-emmc@4300000 {
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	sd:cv-sd@4310000 {
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	i2s0: i2s@04100000 {
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	i2s1: i2s@04110000 {
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	i2s2: i2s@04120000 {
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	i2s3: i2s@04130000 {
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	wifisd:wifi-sd@4320000 {
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	mipi_rx: cif {
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "csi0", "csi1";
+	};
+
+	vi {
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "isp";
+	};
+
+	ive {
+		interrupt-names = "ive_irq";
+		interrupts = <GIC_SPI 81 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	vpss {
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "sc";
+	};
+
+	dwa {
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "dwa";
+	};
+
+	vcodec {
+		interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "h265","h264","sbm";
+	};
+
+	jpu {
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "jpeg";
+	};
+
+	rtos_cmdqu {
+		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "mailbox";
+	};
+
+	usb: usb@04340000 {
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	thermal:thermal@030E0000 {
+		interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tempsen";
+	};
+
+};
diff --git a/sys/contrib/device-tree/src/riscv/sophgo/cv181x_base_riscv.dtsi b/sys/contrib/device-tree/src/riscv/sophgo/cv181x_base_riscv.dtsi
new file mode 100644
index 00000000000000..f21444c72b1a94
--- /dev/null
+++ b/sys/contrib/device-tree/src/riscv/sophgo/cv181x_base_riscv.dtsi
@@ -0,0 +1,378 @@
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/reset/cv181x-resets.h>
+#include <dt-bindings/clock/cv181x-clock.h>
+#include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/dma/cv181x-dmamap.h>
+#include "cv181x_base.dtsi"
+
+/ {
+	model = "Cvitek. CV181X ASIC. C906.";
+
+	#size-cells = <0x2>;
+	#address-cells = <0x2>;
+
+	cpus {
+		#address-cells = <0x01>;
+		#size-cells = <0x00>;
+		timebase-frequency = <25000000>;
+		u-boot,dm-spl;
+		cpu-map {
+			u-boot,dm-spl;
+			cluster0 {
+
+				core0 {
+					cpu = <0x01>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			u-boot,dm-spl;
+			device_type = "cpu";
+			reg = <0x00>;
+			status = "okay";
+			compatible = "riscv";
+			riscv,isa = "rv64imafdvcsu";
+			mmu-type = "riscv,sv39";
+			clock-frequency = <25000000>;
+
+			cpu0_intc: interrupt-controller {
+				#interrupt-cells = <0x01>;
+				interrupt-controller;
+				compatible = "riscv,cpu-intc";
+			};
+		};
+	};
+
+	soc {
+		#address-cells = <0x02>;
+		#size-cells = <0x02>;
+		compatible = "simple-bus";
+		ranges;
+
+		plic0: interrupt-controller@70000000 {
+			riscv,ndev = <101>;
+			riscv,max-priority = <0x07>;
+			reg-names = "control";
+			reg = <0x00 0x70000000 0x00 0x4000000>;
+			interrupts-extended = <&cpu0_intc 0xffffffff &cpu0_intc 0x09>;
+			interrupt-controller;
+			compatible = "riscv,plic0";
+			#interrupt-cells = <0x02>;
+			#address-cells = <0x00>;
+		};
+
+		clint@74000000 {
+			interrupts-extended = <&cpu0_intc 0x03 &cpu0_intc 0x07>;
+			reg = <0x00 0x74000000 0x00 0x10000>;
+			compatible = "riscv,clint0";
+			clint,has-no-64bit-mmio;
+		};
+
+	};
+
+	cv181x_cooling:cv181x_cooling {
+		clocks = <&clk CV181X_CLK_C906_0>, <&clk CV181X_CLK_TPU>;
+		clock-names = "clk_cpu", "clk_tpu_axi";
+		dev-freqs = <850000000 500000000>,
+			<425000000 375000000>,
+			<425000000 300000000>;
+		compatible = "cvitek,cv181x-cooling";
+		#cooling-cells = <2>;
+	};
+
+	tpu {
+		interrupts = <75 IRQ_TYPE_LEVEL_HIGH>,
+				<76 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tiu_irq", "tdma_irq";
+		interrupt-parent = <&plic0>;
+	};
+
+	mon {
+		interrupts = <93 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "mon_irq";
+		interrupt-parent = <&plic0>;
+	};
+
+	wiegand0 {
+		interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	wiegand1 {
+		interrupts = <65 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	wiegand2 {
+		interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	saradc {
+		interrupts = <100 IRQ_TYPE_EDGE_RISING>;
+		interrupt-parent = <&plic0>;
+	};
+
+	rtc {
+		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	sysdma_remap {
+		int_mux = <0x7FC00>; /* enable bit [10..18] for CPU1(906B) */
+	};
+
+	dmac: dma@0x4330000 {
+		interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	watchdog0: cv-wd@0x3010000 {
+		interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
+	};
+	trng: dw_trng@0x02070000 {
+		reg = <0x0 0x02070000 0x0 0x1000>;
+		compatible = "snps,dw-trng";
+	};
+	spacc: cvi_spacc@02060000 {
+		interrupts = <91 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	spinand:cv-spinf@4060000 {
+		interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	spif:cvi-spif@10000000 {
+		interrupts = <95 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	spi0:spi0@04180000 {
+		interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	spi1:spi1@04190000 {
+		interrupts = <55 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	spi2:spi2@041A0000 {
+		interrupts = <56 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	spi3:spi3@041B0000 {
+		interrupts = <57 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	uart0: serial@04140000 {
+		interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	uart1: serial@04150000 {
+		interrupts = <45 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	uart2: serial@04160000 {
+		interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	uart3: serial@04170000 {
+		interrupts = <47 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	uart4: serial@041C0000 {
+		interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	gpio0: gpio@03020000 {
+		porta: gpio-controller@0 {
+			interrupt-controller;
+			interrupts = <60 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&plic0>;
+		};
+	};
+
+	gpio1: gpio@03021000 {
+		portb: gpio-controller@1 {
+			interrupt-controller;
+			interrupts = <61 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&plic0>;
+		};
+	};
+
+	gpio2: gpio@03022000 {
+		portc: gpio-controller@2 {
+			interrupt-controller;
+			interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&plic0>;
+		};
+	};
+
+	gpio3: gpio@03023000 {
+		portd: gpio-controller@3 {
+			interrupt-controller;
+			interrupts = <63 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&plic0>;
+		};
+	};
+
+	gpio4: gpio@05021000 {
+		porte: gpio-controller@4 {
+			interrupt-controller;
+			interrupts = <70 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&plic0>;
+		};
+	};
+
+	i2c0: i2c@04000000 {
+		interrupts = <49 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	i2c1: i2c@04010000 {
+		interrupts = <50 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	i2c2: i2c@04020000 {
+		interrupts = <51 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	i2c3: i2c@04030000 {
+		interrupts = <52 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	i2c4: i2c@04040000 {
+		interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	ethernet0: ethernet@4070000 {
+		interrupt-names = "macirq";
+		interrupts = <31 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	emmc:cv-emmc@4300000 {
+		interrupts = <34 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	sd:cv-sd@4310000 {
+		interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	i2s0: i2s@04100000 {
+		interrupts = <40 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	i2s1: i2s@04110000 {
+		interrupts = <41 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	i2s2: i2s@04120000 {
+		interrupts = <42 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	i2s3: i2s@04130000 {
+		interrupts = <43 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	vi {
+		interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+		interrupt-names = "isp";
+	};
+
+	vcodec {
+		interrupts = <22 IRQ_TYPE_LEVEL_HIGH>,
+			     <21 IRQ_TYPE_LEVEL_HIGH>,
+			     <23 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "h265","h264","sbm";
+		interrupt-parent = <&plic0>;
+	};
+
+	jpu {
+		interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "jpeg";
+		interrupt-parent = <&plic0>;
+	};
+
+	rtos_cmdqu {
+		interrupts = <101 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "mailbox";
+		interrupt-parent = <&plic0>;
+	};
+
+	wifisd:wifi-sd@4320000 {
+		interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	mipi_rx: cif {
+		interrupts = <26 IRQ_TYPE_LEVEL_HIGH>,
+			     <27 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "csi0", "csi1";
+		interrupt-parent = <&plic0>;
+	};
+
+	ive {
+		interrupt-names = "ive_irq";
+		interrupt-parent = <&plic0>;
+		interrupts = <97 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	vpss {
+		interrupts = <25 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "sc";
+		interrupt-parent = <&plic0>;
+	};
+
+	dwa {
+		interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "dwa";
+		interrupt-parent = <&plic0>;
+	};
+
+	usb: usb@04340000 {
+		interrupts = <30 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&plic0>;
+	};
+
+	thermal:thermal@030E0000 {
+		interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "tempsen";
+	};
+
+	chosen {
+		opensbi-domain{
+			compatible = "opensbi,dimain,config";
+
+			tdomain: trusted-domain {
+				compatible = "opensbi,domain,instance";
+				possible-harts = <&cpu0>;
+				system-suspend-allowed;
+			};
+		};
+	};	
+
+};
diff --git a/sys/contrib/device-tree/src/riscv/sophgo/cv181x_default_memmap.dtsi b/sys/contrib/device-tree/src/riscv/sophgo/cv181x_default_memmap.dtsi
new file mode 100644
index 00000000000000..bb362511c57b4b
--- /dev/null
+++ b/sys/contrib/device-tree/src/riscv/sophgo/cv181x_default_memmap.dtsi
@@ -0,0 +1,25 @@
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00 CVIMMAP_KERNEL_MEMORY_ADDR 0x00 CVIMMAP_KERNEL_MEMORY_SIZE>;
+	};
+
+
+	fast_image {
+		compatible = "cvitek,rtos_image";
+		reg-names = "rtos_region";
+		reg = <0x0 CVIMMAP_FREERTOS_ADDR 0x0 CVIMMAP_FREERTOS_SIZE>;
+		ion-size = <CVIMMAP_FREERTOS_RESERVED_ION_SIZE>;	//reserved ion size for freertos
+	};
+
+	reserved-memory {
+		#size-cells = <0x2>;
+		#address-cells = <0x2>;
+		ranges;
+
+		ion_reserved: ion {
+			compatible = "ion-region";
+			size = <0x0 CVIMMAP_ION_SIZE>;
+		};
+	};
+};
diff --git a/sys/contrib/device-tree/src/riscv/sophgo/sg2000_milkv_duos_glibc_arm64_emmc.dts b/sys/contrib/device-tree/src/riscv/sophgo/sg2000_milkv_duos_glibc_arm64_emmc.dts
new file mode 100644
index 00000000000000..f06a08c43da675
--- /dev/null
+++ b/sys/contrib/device-tree/src/riscv/sophgo/sg2000_milkv_duos_glibc_arm64_emmc.dts
@@ -0,0 +1,108 @@
+/dts-v1/;
+#include "cv181x_base_arm.dtsi"
+#include "cv181x_asic_bga.dtsi"
+#include "cv181x_asic_emmc.dtsi"
+
+/ {
+	model = "Milk-V DuoS";
+};
+
+&mipi_rx {
+	snsr-reset = <&porta 2 GPIO_ACTIVE_LOW>, <&porta 2 GPIO_ACTIVE_LOW>, <&porta 2 GPIO_ACTIVE_LOW>;
+};
+
+&i2c0 {
+	status = "disabled";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	gt9xx: gt9xx@14 {
+		compatible = "goodix,gt9xx";
+		reg = <0x14>;
+		goodix,irq-gpio = <&porta 18 0>;
+		goodix,rst-gpio = <&porta 19 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+};
+
+&spi3 {
+	status = "okay";
+
+	spidev@0 {
+		status = "okay";
+	};
+};
+
+&dac {
+	/delete-property/ mute-gpio-l;
+	/delete-property/ mute-gpio-r;
+};
+
+/* mipi dsi for u-boot */
+&vo {
+	compatible = "cvitek,vo";
+	reset-gpio = <&porte 2 GPIO_ACTIVE_LOW>;
+	pwm-gpio = <&porte 0 GPIO_ACTIVE_HIGH>;
+	power-ct-gpio = <&porte 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+/* mipi dsi for kernel */
+&mipi_tx {
+	compatible = "cvitek,mipi_tx";
+	reset-gpio = <&porte 2 GPIO_ACTIVE_LOW>;
+	pwm-gpio = <&porte 0 GPIO_ACTIVE_HIGH>;
+	power-ct-gpio = <&porte 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&wifisd {
+	status = "okay";
+	cap-sd-highspeed;
+	sd-uhs-sdr25;
+	sd-uhs-ddr50;
+	sd-uhs-sdr104;
+	min-frequency = <400000>;
+	max-frequency = <187500000>;
+};
+
+&wifi_pin {
+	status = "okay";
+	compatible = "cvitek,wifi-pin";
+	poweron-gpio = <&porta 15 GPIO_ACTIVE_HIGH>;
+	wakeup-gpio = <&porte 7 GPIO_ACTIVE_HIGH>;
+};
+
+&usb {
+	vbus-gpio = <&portb 6 0>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
diff --git a/sys/contrib/device-tree/src/riscv/sophgo/sg2000_milkv_duos_glibc_arm64_sd.dts b/sys/contrib/device-tree/src/riscv/sophgo/sg2000_milkv_duos_glibc_arm64_sd.dts
new file mode 100644
index 00000000000000..d4decec7a53e4b
--- /dev/null
+++ b/sys/contrib/device-tree/src/riscv/sophgo/sg2000_milkv_duos_glibc_arm64_sd.dts
@@ -0,0 +1,112 @@
+/dts-v1/;
+#include "cv181x_base_arm.dtsi"
+#include "cv181x_asic_bga.dtsi"
+#include "cv181x_asic_sd.dtsi"
+
+/ {
+	model = "Milk-V DuoS";
+
+	sd:cv-sd@4310000 {
+		max-frequency = <10000000>;
+	};
+};
+
+&mipi_rx {
+	snsr-reset = <&porta 2 GPIO_ACTIVE_LOW>, <&porta 2 GPIO_ACTIVE_LOW>, <&porta 2 GPIO_ACTIVE_LOW>;
+};
+
+&i2c0 {
+	status = "disabled";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	gt9xx: gt9xx@14 {
+		compatible = "goodix,gt9xx";
+		reg = <0x14>;
+		goodix,irq-gpio = <&porta 18 0>;
+		goodix,rst-gpio = <&porta 19 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+};
+
+&spi3 {
+	status = "okay";
+
+	spidev@0 {
+		status = "okay";
+	};
+};
+
+&dac {
+	/delete-property/ mute-gpio-l;
+	/delete-property/ mute-gpio-r;
+};
+
+/* mipi dsi for u-boot */
+&vo {
+	compatible = "cvitek,vo";
+	reset-gpio = <&porte 2 GPIO_ACTIVE_LOW>;
+	pwm-gpio = <&porte 0 GPIO_ACTIVE_HIGH>;
+	power-ct-gpio = <&porte 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+/* mipi dsi for kernel */
+&mipi_tx {
+	compatible = "cvitek,mipi_tx";
+	reset-gpio = <&porte 2 GPIO_ACTIVE_LOW>;
+	pwm-gpio = <&porte 0 GPIO_ACTIVE_HIGH>;
+	power-ct-gpio = <&porte 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&wifisd {
+	status = "okay";
+	cap-sd-highspeed;
+	sd-uhs-sdr25;
+	sd-uhs-ddr50;
+	sd-uhs-sdr104;
+	min-frequency = <400000>;
+	max-frequency = <187500000>;
+};
+
+&wifi_pin {
+	status = "okay";
+	compatible = "cvitek,wifi-pin";
+	poweron-gpio = <&porta 15 GPIO_ACTIVE_HIGH>;
+	wakeup-gpio = <&porte 7 GPIO_ACTIVE_HIGH>;
+};
+
+&usb {
+	vbus-gpio = <&portb 6 0>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
diff --git a/sys/contrib/device-tree/src/riscv/sophgo/sg2000_milkv_duos_musl_riscv64_emmc.dts b/sys/contrib/device-tree/src/riscv/sophgo/sg2000_milkv_duos_musl_riscv64_emmc.dts
new file mode 100644
index 00000000000000..5b28bbd087c7bd
--- /dev/null
+++ b/sys/contrib/device-tree/src/riscv/sophgo/sg2000_milkv_duos_musl_riscv64_emmc.dts
@@ -0,0 +1,108 @@
+/dts-v1/;
+#include "cv181x_base_riscv.dtsi"
+#include "cv181x_asic_bga.dtsi"
+#include "cv181x_asic_emmc.dtsi"
+
+/ {
+	model = "Milk-V DuoS";
+};
+
+&mipi_rx {
+	snsr-reset = <&porta 2 GPIO_ACTIVE_LOW>, <&porta 2 GPIO_ACTIVE_LOW>, <&porta 2 GPIO_ACTIVE_LOW>;
+};
+
+&i2c0 {
+	status = "disabled";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	gt9xx: gt9xx@14 {
+		compatible = "goodix,gt9xx";
+		reg = <0x14>;
+		goodix,irq-gpio = <&porta 18 0>;
+		goodix,rst-gpio = <&porta 19 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+};
+
+&spi3 {
+	status = "okay";
+
+	spidev@0 {
+		status = "okay";
+	};
+};
+
+&dac {
+	/delete-property/ mute-gpio-l;
+	/delete-property/ mute-gpio-r;
+};
+
+/* mipi dsi for u-boot */
+&vo {
+	compatible = "cvitek,vo";
+	reset-gpio = <&porte 2 GPIO_ACTIVE_LOW>;
+	pwm-gpio = <&porte 0 GPIO_ACTIVE_HIGH>;
+	power-ct-gpio = <&porte 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+/* mipi dsi for kernel */
+&mipi_tx {
+	compatible = "cvitek,mipi_tx";
+	reset-gpio = <&porte 2 GPIO_ACTIVE_LOW>;
+	pwm-gpio = <&porte 0 GPIO_ACTIVE_HIGH>;
+	power-ct-gpio = <&porte 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&wifisd {
+	status = "okay";
+	cap-sd-highspeed;
+	sd-uhs-sdr25;
+	sd-uhs-ddr50;
+	sd-uhs-sdr104;
+	min-frequency = <400000>;
+	max-frequency = <187500000>;
+};
+
+&wifi_pin {
+	status = "okay";
+	compatible = "cvitek,wifi-pin";
+	poweron-gpio = <&porta 15 GPIO_ACTIVE_HIGH>;
+	wakeup-gpio = <&porte 7 GPIO_ACTIVE_HIGH>;
+};
+
+&usb {
+	vbus-gpio = <&portb 6 0>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
diff --git a/sys/contrib/device-tree/src/riscv/sophgo/sg2000_milkv_duos_musl_riscv64_sd.dts b/sys/contrib/device-tree/src/riscv/sophgo/sg2000_milkv_duos_musl_riscv64_sd.dts
new file mode 100644
index 00000000000000..af3d56ff39034d
--- /dev/null
+++ b/sys/contrib/device-tree/src/riscv/sophgo/sg2000_milkv_duos_musl_riscv64_sd.dts
@@ -0,0 +1,108 @@
+/dts-v1/;
+#include "cv181x_base_riscv.dtsi"
+#include "cv181x_asic_bga.dtsi"
+#include "cv181x_asic_sd.dtsi"
+
+/ {
+	model = "Milk-V DuoS";
+};
+
+&mipi_rx {
+	snsr-reset = <&porta 2 GPIO_ACTIVE_LOW>, <&porta 2 GPIO_ACTIVE_LOW>, <&porta 2 GPIO_ACTIVE_LOW>;
+};
+
+&i2c0 {
+	status = "disabled";
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	gt9xx: gt9xx@14 {
+		compatible = "goodix,gt9xx";
+		reg = <0x14>;
+		goodix,irq-gpio = <&porta 18 0>;
+		goodix,rst-gpio = <&porta 19 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+};
+
+&spi3 {
+	status = "okay";
+
+	spidev@0 {
+		status = "okay";
+	};
+};
+
+&dac {
+	/delete-property/ mute-gpio-l;
+	/delete-property/ mute-gpio-r;
+};
+
+/* mipi dsi for u-boot */
+&vo {
+	compatible = "cvitek,vo";
+	reset-gpio = <&porte 2 GPIO_ACTIVE_LOW>;
+	pwm-gpio = <&porte 0 GPIO_ACTIVE_HIGH>;
+	power-ct-gpio = <&porte 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+/* mipi dsi for kernel */
+&mipi_tx {
+	compatible = "cvitek,mipi_tx";
+	reset-gpio = <&porte 2 GPIO_ACTIVE_LOW>;
+	pwm-gpio = <&porte 0 GPIO_ACTIVE_HIGH>;
+	power-ct-gpio = <&porte 1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&wifisd {
+	status = "okay";
+	cap-sd-highspeed;
+	sd-uhs-sdr25;
+	sd-uhs-ddr50;
+	sd-uhs-sdr104;
+	min-frequency = <400000>;
+	max-frequency = <187500000>;
+};
+
+&wifi_pin {
+	status = "okay";
+	compatible = "cvitek,wifi-pin";
+	poweron-gpio = <&porta 15 GPIO_ACTIVE_HIGH>;
+	wakeup-gpio = <&porte 7 GPIO_ACTIVE_HIGH>;
+};
+
+&usb {
+	vbus-gpio = <&portb 6 0>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
diff --git a/sys/contrib/device-tree/src/riscv/sophgo/sg2000_wevb_arm64_sd.dts b/sys/contrib/device-tree/src/riscv/sophgo/sg2000_wevb_arm64_sd.dts
new file mode 100644
index 00000000000000..0eac8fbd4a8a0c
--- /dev/null
+++ b/sys/contrib/device-tree/src/riscv/sophgo/sg2000_wevb_arm64_sd.dts
@@ -0,0 +1,13 @@
+/dts-v1/;
+#include "cv181x_base_arm.dtsi"
+#include "cv181x_asic_bga.dtsi"
+#include "cv181x_asic_sd.dtsi"
+#include "cv181x_default_memmap.dtsi"
+
+/ {
+
+	sd:cv-sd@4310000 {
+		max-frequency = <10000000>;
+	};
+};
+
diff --git a/sys/contrib/device-tree/src/riscv/sophgo/sg2000_wevb_riscv64_sd.dts b/sys/contrib/device-tree/src/riscv/sophgo/sg2000_wevb_riscv64_sd.dts
new file mode 100644
index 00000000000000..9b649d734853ab
--- /dev/null
+++ b/sys/contrib/device-tree/src/riscv/sophgo/sg2000_wevb_riscv64_sd.dts
@@ -0,0 +1,10 @@
+/dts-v1/;
+#include "cv181x_base_riscv.dtsi"
+#include "cv181x_asic_bga.dtsi"
+#include "cv181x_asic_sd.dtsi"
+#include "cv181x_default_memmap.dtsi"
+
+/ {
+
+};
+
diff --git a/sys/modules/dtb/sophgo/Makefile b/sys/modules/dtb/sophgo/Makefile
new file mode 100644
index 00000000000000..c61d3dd8eeeae2
--- /dev/null
+++ b/sys/modules/dtb/sophgo/Makefile
@@ -0,0 +1,9 @@
+DTS=	\
+	sophgo/sg2000_milkv_duos_glibc_arm64_emmc.dts \
+	sophgo/sg2000_milkv_duos_glibc_arm64_sd.dts \
+	sophgo/sg2000_milkv_duos_musl_riscv64_emmc.dts \
+	sophgo/sg2000_milkv_duos_musl_riscv64_sd.dts \
+	sophgo/sg2000_wevb_arm64_sd.dts \
+	sophgo/sg2000_wevb_riscv64_sd.dts
+
+.include <bsd.dtb.mk>
\ No newline at end of file
diff --git a/sys/riscv/conf/GENERIC b/sys/riscv/conf/GENERIC
index 2ff711e80127dc..e0dbc7a007031e 100644
--- a/sys/riscv/conf/GENERIC
+++ b/sys/riscv/conf/GENERIC
@@ -211,3 +211,4 @@ include		"std.cvitek"
 include		"std.eswin"
 include		"std.sifive"
 include		"std.starfive"
+include		"std.sophgo"
diff --git a/sys/riscv/conf/std.sophgo b/sys/riscv/conf/std.sophgo
new file mode 100644
index 00000000000000..bcb9a4426acb5b
--- /dev/null
+++ b/sys/riscv/conf/std.sophgo
@@ -0,0 +1,8 @@
+#
+# Sophgo SoC support
+#
+
+# DTBs
+makeoptions	MODULES_EXTRA+="dtb/sophgo"
+
+files		"../sophgo/files.sophgo"
diff --git a/sys/riscv/sophgo/files.sophgo b/sys/riscv/sophgo/files.sophgo
new file mode 100644
index 00000000000000..1ce0e7a190df70
--- /dev/null
+++ b/sys/riscv/sophgo/files.sophgo
@@ -0,0 +1,2 @@
+dev/dwc/if_dwc_cvitek.c			optional fdt dwc_cvitek
+dev/sdhci/sdhci_fdt_cvitek.c		optional fdt sdhci sdhci_cvitek regulator
\ No newline at end of file