diff --git a/_P250_SPI_DigiPot.ino b/_P250_SPI_DigiPot.ino
new file mode 100644
index 0000000..92bd3d2
--- /dev/null
+++ b/_P250_SPI_DigiPot.ino
@@ -0,0 +1,184 @@
+//#######################################################################################################
+//################################### Plugin 250: SPI_DigiPot ###########################################
+//############################# For MCP 4151 add only one instance ######################################
+//############################# For MCP 42010 add two instances, ... ####################################
+//#######################################################################################################
+// written by antibill
+
+// Usage:
+// (1): Set value to potentiometer (http://xx.xx.xx.xx/control?cmd=digipot,0,255)
+// (2): Set value to potentiometer (http://xx.xx.xx.xx/control?cmd=digipot,1,0)
+
+static uint16_t Plugin_250_PotDest[2] = {0,0}; // 2 is the number of max digipot. if 4, then {0,0,0,0}. Adapt also uint16t.
+uint8_t Plugin_250_pot_number = 0; // initial value
+
+#define PLUGIN_250
+#define PLUGIN_ID_250         250
+#define PLUGIN_NAME_250       "SPI_DigiPot"
+#define PLUGIN_VALUENAME1_250 "DigiPot"
+
+
+
+
+boolean Plugin_250(byte function, struct EventStruct *event, String& string)
+{
+  boolean success = false;
+
+  switch (function)
+  {
+    case PLUGIN_DEVICE_ADD:
+      {
+
+
+        Device[++deviceCount].Number = PLUGIN_ID_250;
+        Device[deviceCount].Type = DEVICE_TYPE_SPI;
+        Device[deviceCount].Ports = 0;
+        Device[deviceCount].VType = Sensor_VType::SENSOR_TYPE_SINGLE;
+        Device[deviceCount].PullUpOption = false;
+        Device[deviceCount].InverseLogicOption = false;
+        Device[deviceCount].FormulaOption = true;
+        Device[deviceCount].ValueCount = 1;
+        Device[deviceCount].SendDataOption = true;
+        Device[deviceCount].TimerOption = true;
+        Device[deviceCount].TimerOptional = true;
+        Device[deviceCount].GlobalSyncOption = true;
+        break;
+      }
+
+    case PLUGIN_GET_DEVICENAME:
+      {
+        string = F(PLUGIN_NAME_250);
+        break;
+      }
+
+    case PLUGIN_GET_DEVICEVALUENAMES:
+      {
+        strcpy_P(ExtraTaskSettings.TaskDeviceValueNames[0], PSTR(PLUGIN_VALUENAME1_250));
+        break;
+      }
+
+    case PLUGIN_GET_DEVICEGPIONAMES:
+      {
+        event->String1 = formatGpioName_output(F("CS"));
+        break;
+      }
+
+    case PLUGIN_WEBFORM_LOAD:
+      {
+        # ifdef ESP8266
+          {
+            addFormNote(F("<b>1st GPIO</b> = CS (Usable GPIOs : 0, 2, 4, 5, 15)"));
+          }
+        # endif // ifdef ESP8266
+        # ifdef ESP32
+          {
+            addFormNote(F("<b>1st GPIO</b> = CS (Usable GPIOs : 0, 2, 4, 5, 15..19, 21..23, 25..27, 32, 33)"));
+          }
+        # endif // ifdef ESP32
+        addFormNumericBox(F("DigiPot Number"), F("p250_pot_number"), PCONFIG(0), 0, 255);
+        addFormNote(F("<b>1st DigiPot is 0, 2nd : 1, ... "));
+        success = true;
+        break;
+      }
+
+    case PLUGIN_WEBFORM_SAVE:
+      {
+        PCONFIG(0) = getFormItemInt(F("p250_pot_number"));
+        Plugin_250_pot_number = PCONFIG(0);
+        success = true;
+        break;
+      }
+
+    case PLUGIN_INIT:
+      {
+      uint8_t CS_pin_no = get_SPI_CS_Pin(event);
+      Plugin_250_pot_number = PCONFIG(0);
+      // set the slaveSelectPin as an output:
+      init_SPI_CS_Pin(CS_pin_no);
+
+      // initialize SPI:
+      SPI.setHwCs(false);
+      SPI.begin();
+        success = true;
+        break;
+      }
+
+    case PLUGIN_WRITE:
+      {
+        uint8_t pot_number = PCONFIG(0);
+        uint8_t CS_pin_no = get_SPI_CS_Pin(event);
+        String tmpString  = string;
+        int argIndex = tmpString.indexOf(',');
+        if (argIndex)
+          tmpString = tmpString.substring(0, argIndex);
+
+        if (tmpString.equalsIgnoreCase(F("digipot")))
+        {
+          uint8_t pot;
+          uint16_t value;
+          pot = event->Par1;
+          value = event->Par2;
+          if (pot_number == pot)
+          {
+            if (value> 255)
+              {
+                value = 255;
+              }
+            handle_SPI_CS_Pin(CS_pin_no, LOW);
+            SPI.transfer(((pot +1) & B11) | B00010000);
+            SPI.transfer(value);
+            handle_SPI_CS_Pin(CS_pin_no, HIGH);
+            Plugin_250_PotDest[pot] = value;
+            UserVar[event->BaseVarIndex + 0 ] = Plugin_250_PotDest[pot] ;
+            success = true;
+          }
+        }
+        break;
+      }
+
+    case PLUGIN_READ:
+      {
+        int8_t pot_number = PCONFIG(0);
+        UserVar[event->BaseVarIndex + 0] = Plugin_250_PotDest[pot_number] ;
+        success = true;
+        break;
+      }
+  }
+  return success;
+}
+/**************************************************************************/
+int get_SPI_CS_Pin(struct EventStruct *event) {  // If no Pin is in Config we use 15 as default -> Hardware Chip Select on ESP8266
+  if (CONFIG_PIN1 != 0) {
+    return CONFIG_PIN1;
+  }
+  return 15; 
+}
+
+/**************************************************************************/
+/*!
+    @brief Initializing GPIO as OUTPUT for CS for SPI communication
+    @param CS_pin_no the GPIO pin number used as CS
+    @returns
+    
+    Initial Revision - chri.kai.in 2021 
+/**************************************************************************/
+void init_SPI_CS_Pin (uint8_t CS_pin_no) {
+  
+      // set the slaveSelectPin as an output:
+      pinMode(CS_pin_no, OUTPUT);
+
+}
+
+/**************************************************************************/
+/*!
+    @brief Handling GPIO as CS for SPI communication
+    @param CS_pin_no the GPIO pin number used as CS
+    @param l_state the state of the CS pin: "HIGH/LOW" reflecting the physical level
+    @returns
+    
+    Initial Revision - chri.kai.in 2021 
+/**************************************************************************/
+void handle_SPI_CS_Pin (uint8_t CS_pin_no, bool l_state) {
+  
+  digitalWrite(CS_pin_no, l_state);
+}