[WebAssembly] Implement getInterleavedMemoryOpCost

First pass where we calculate the cost of the memory operation, as
well as the shuffles required. Interleaving by a factor of two should
be relatively cheap, as many ISAs have dedicated instructions to
perform the (de)interleaving. Several of these permutations can be
combined for an interleave stride of 4 and this is the highest stride
we allow.

I've costed larger vectors, and more lanes, as more expensive because
not only is more work is needed but the risk of codegen going 'wrong'
rises dramatically. I also filled in a bit of cost modelling for
vector stores.

It appears the main vector plan to avoid is an interleave factor of 4
with v16i8. I've used libyuv and ncnn for benchmarking, using V8 on
AArch64, and observe geomean improvement of ~3% which some kernels
improving 40-60%.

I know there is still significant performance being left on the
table, so this will need more development along with the rest of the
cost model.

Author: sparker-arm

llvm/lib/Target/WebAssembly/WebAssemblyTargetTransformInfo.cpp

@@ -166,12 +166,6 @@ InstructionCost WebAssemblyTTIImpl::getMemoryOpCost(
                                   CostKind);
   }
 
-  int ISD = TLI->InstructionOpcodeToISD(Opcode);
-  if (ISD != ISD::LOAD) {
-    return BaseT::getMemoryOpCost(Opcode, Ty, Alignment, AddressSpace,
-                                  CostKind);
-  }
-
   EVT VT = TLI->getValueType(DL, Ty, true);
   // Type legalization can't handle structs
   if (VT == MVT::Other)
@@ -182,22 +176,117 @@ InstructionCost WebAssemblyTTIImpl::getMemoryOpCost(
   if (!LT.first.isValid())
     return InstructionCost::getInvalid();
 
-  // 128-bit loads are a single instruction. 32-bit and 64-bit vector loads can
-  // be lowered to load32_zero and load64_zero respectively. Assume SIMD loads
-  // are twice as expensive as scalar.
+  int ISD = TLI->InstructionOpcodeToISD(Opcode);
   unsigned width = VT.getSizeInBits();
-  switch (width) {
-  default:
-    break;
-  case 32:
-  case 64:
-  case 128:
-    return 2;
+  if (ISD == ISD::LOAD) {
+    // 128-bit loads are a single instruction. 32-bit and 64-bit vector loads
+    // can be lowered to load32_zero and load64_zero respectively. Assume SIMD
+    // loads are twice as expensive as scalar.
+    switch (width) {
+    default:
+      break;
+    case 32:
+    case 64:
+    case 128:
+      return 2;
+    }
+  } else if (ISD == ISD::STORE) {
+    // For stores, we can use store lane operations.
+    switch (width) {
+    default:
+      break;
+    case 8:
+    case 16:
+    case 32:
+    case 64:
+    case 128:
+      return 2;
+    }
   }
 
   return BaseT::getMemoryOpCost(Opcode, Ty, Alignment, AddressSpace, CostKind);
 }
 
+InstructionCost WebAssemblyTTIImpl::getInterleavedMemoryOpCost(
+    unsigned Opcode, Type *Ty, unsigned Factor, ArrayRef<unsigned> Indices,
+    Align Alignment, unsigned AddressSpace, TTI::TargetCostKind CostKind,
+    bool UseMaskForCond, bool UseMaskForGaps) const {
+  assert(Factor >= 2 && "Invalid interleave factor");
+
+  auto *VecTy = cast<VectorType>(Ty);
+  if (!ST->hasSIMD128() || !isa<FixedVectorType>(VecTy)) {
+    return InstructionCost::getInvalid();
+  }
+
+  if (UseMaskForCond || UseMaskForGaps)
+    return BaseT::getInterleavedMemoryOpCost(Opcode, Ty, Factor, Indices,
+                                             Alignment, AddressSpace, CostKind,
+                                             UseMaskForCond, UseMaskForGaps);
+
+  constexpr unsigned MaxInterleaveFactor = 4;
+  if (Factor <= MaxInterleaveFactor) {
+    unsigned MinElts = VecTy->getElementCount().getKnownMinValue();
+    // Ensure the number of vector elements is greater than 1.
+    if (MinElts < 2 || MinElts % Factor != 0)
+      return InstructionCost::getInvalid();
+
+    unsigned ElSize = DL.getTypeSizeInBits(VecTy->getElementType());
+    // Ensure the element type is legal.
+    if (ElSize != 8 && ElSize != 16 && ElSize != 32 && ElSize != 64)
+      return InstructionCost::getInvalid();
+
+    auto *SubVecTy =
+        VectorType::get(VecTy->getElementType(),
+                        VecTy->getElementCount().divideCoefficientBy(Factor));
+    InstructionCost MemCost =
+        getMemoryOpCost(Opcode, SubVecTy, Alignment, AddressSpace, CostKind);
+
+    unsigned VecSize = DL.getTypeSizeInBits(SubVecTy);
+    unsigned MaxVecSize = 128;
+    unsigned NumAccesses =
+        std::max<unsigned>(1, (MinElts * ElSize + MaxVecSize - 1) / VecSize);
+
+    // A stride of two is commonly supported via dedicated instructions, so it
+    // should be relatively cheap for all element sizes. A stride of four is
+    // more expensive as it will likely require more shuffles. Using two
+    // simd128 inputs is considered more expensive and we don't currently
+    // account for shuffling than two inputs (32 bytes).
+    static const CostTblEntry ShuffleCostTbl[] = {
+        // One reg.
+        {2, MVT::v2i8, 1},  // interleave 2 x 2i8 into 4i8
+        {2, MVT::v4i8, 1},  // interleave 2 x 4i8 into 8i8
+        {2, MVT::v8i8, 1},  // interleave 2 x 8i8 into 16i8
+        {2, MVT::v2i16, 1}, // interleave 2 x 2i16 into 4i16
+        {2, MVT::v4i16, 1}, // interleave 2 x 4i16 into 8i16
+        {2, MVT::v2i32, 1}, // interleave 2 x 2i32 into 4i32
+
+        // Two regs.
+        {2, MVT::v16i8, 2}, // interleave 2 x 16i8 into 32i8
+        {2, MVT::v8i16, 2}, // interleave 2 x 8i16 into 16i16
+        {2, MVT::v4i32, 2}, // interleave 2 x 4i32 into 8i32
+
+        // One reg.
+        {4, MVT::v2i8, 4},  // interleave 4 x 2i8 into 8i8
+        {4, MVT::v4i8, 4},  // interleave 4 x 4i8 into 16i8
+        {4, MVT::v2i16, 4}, // interleave 4 x 2i16 into 8i16
+
+        // Two regs.
+        {4, MVT::v8i8, 16}, // interleave 4 x 8i8 into 32i8
+        {4, MVT::v4i16, 8}, // interleave 4 x 4i16 into 16i16
+        {4, MVT::v2i32, 4}, // interleave 4 x 2i32 into 8i32
+    };
+
+    EVT ETy = TLI->getValueType(DL, SubVecTy);
+    if (const auto *Entry =
+            CostTableLookup(ShuffleCostTbl, Factor, ETy.getSimpleVT()))
+      return Entry->Cost + (NumAccesses * MemCost);
+  }
+
+  return BaseT::getInterleavedMemoryOpCost(Opcode, VecTy, Factor, Indices,
+                                           Alignment, AddressSpace, CostKind,
+                                           UseMaskForCond, UseMaskForGaps);
+}
+
 InstructionCost WebAssemblyTTIImpl::getVectorInstrCost(
     unsigned Opcode, Type *Val, TTI::TargetCostKind CostKind, unsigned Index,
     const Value *Op0, const Value *Op1) const {

llvm/lib/Target/WebAssembly/WebAssemblyTargetTransformInfo.h

@@ -82,6 +82,10 @@ class WebAssemblyTTIImpl final : public BasicTTIImplBase<WebAssemblyTTIImpl> {
       TTI::TargetCostKind CostKind,
       TTI::OperandValueInfo OpInfo = {TTI::OK_AnyValue, TTI::OP_None},
       const Instruction *I = nullptr) const override;
+  InstructionCost getInterleavedMemoryOpCost(
+      unsigned Opcode, Type *Ty, unsigned Factor, ArrayRef<unsigned> Indices,
+      Align Alignment, unsigned AddressSpace, TTI::TargetCostKind CostKind,
+      bool UseMaskForCond, bool UseMaskForGaps) const override;
   using BaseT::getVectorInstrCost;
   InstructionCost getVectorInstrCost(unsigned Opcode, Type *Val,
                                      TTI::TargetCostKind CostKind,