Merge remote-tracking branch 'stable/linux-6.12.y' into rpi-6.12.y

Author: popcornmix

Documentation/devicetree/bindings/serial/8250.yaml

@@ -45,7 +45,7 @@ allOf:
                   - ns16550
                   - ns16550a
     then:
-      anyOf:
+      oneOf:
         - required: [ clock-frequency ]
         - required: [ clocks ]
 

Documentation/netlink/specs/tc.yaml

@@ -227,7 +227,7 @@ definitions:
         type: u8
         doc: log(P_max / (qth-max - qth-min))
       -
-        name: Scell_log
+        name: Scell-log
         type: u8
         doc: cell size for idle damping
       -
@@ -248,7 +248,7 @@ definitions:
         name: DPs
         type: u32
       -
-        name: def_DP
+        name: def-DP
         type: u32
       -
         name: grio

Makefile

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
 PATCHLEVEL = 12
-SUBLEVEL = 35
+SUBLEVEL = 36
 EXTRAVERSION =
 NAME = Baby Opossum Posse
 

arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi

@@ -227,6 +227,16 @@
 		vin-supply = <&vcc12v_dcin>;
 	};
 
+	vcca_0v9: vcca-0v9 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
 	vdd_log: vdd-log {
 		compatible = "pwm-regulator";
 		pwms = <&pwm2 0 25000 1>;
@@ -312,6 +322,8 @@
 };
 
 &hdmi {
+	avdd-0v9-supply = <&vcca_0v9>;
+	avdd-1v8-supply = <&vcc1v8_dvp>;
 	ddc-i2c-bus = <&i2c3>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&hdmi_cec>;

arch/riscv/include/asm/cmpxchg.h

@@ -169,7 +169,7 @@
 		break;							\
 	case 4:								\
 		__arch_cmpxchg(".w", ".w" sc_sfx, prepend, append,	\
-				__ret, __ptr, (long), __old, __new);	\
+				__ret, __ptr, (long)(int)(long), __old, __new);	\
 		break;							\
 	case 8:								\
 		__arch_cmpxchg(".d", ".d" sc_sfx, prepend, append,	\

arch/riscv/include/asm/pgtable.h

@@ -916,7 +916,6 @@ static inline pte_t pte_swp_clear_exclusive(pte_t pte)
  */
 #ifdef CONFIG_64BIT
 #define TASK_SIZE_64	(PGDIR_SIZE * PTRS_PER_PGD / 2)
-#define TASK_SIZE_MAX	LONG_MAX
 
 #ifdef CONFIG_COMPAT
 #define TASK_SIZE_32	(_AC(0x80000000, UL) - PAGE_SIZE)

arch/riscv/kernel/traps_misaligned.c

@@ -429,7 +429,7 @@ int handle_misaligned_load(struct pt_regs *regs)
 
 	val.data_u64 = 0;
 	if (user_mode(regs)) {
-		if (copy_from_user_nofault(&val, (u8 __user *)addr, len))
+		if (copy_from_user(&val, (u8 __user *)addr, len))
 			return -1;
 	} else {
 		memcpy(&val, (u8 *)addr, len);
@@ -530,7 +530,7 @@ int handle_misaligned_store(struct pt_regs *regs)
 		return -EOPNOTSUPP;
 
 	if (user_mode(regs)) {
-		if (copy_to_user_nofault((u8 __user *)addr, &val, len))
+		if (copy_to_user((u8 __user *)addr, &val, len))
 			return -1;
 	} else {
 		memcpy((u8 *)addr, &val, len);

arch/riscv/mm/cacheflush.c

@@ -24,7 +24,20 @@ void flush_icache_all(void)
 
 	if (num_online_cpus() < 2)
 		return;
-	else if (riscv_use_sbi_for_rfence())
+
+	/*
+	 * Make sure all previous writes to the D$ are ordered before making
+	 * the IPI. The RISC-V spec states that a hart must execute a data fence
+	 * before triggering a remote fence.i in order to make the modification
+	 * visable for remote harts.
+	 *
+	 * IPIs on RISC-V are triggered by MMIO writes to either CLINT or
+	 * S-IMSIC, so the fence ensures previous data writes "happen before"
+	 * the MMIO.
+	 */
+	RISCV_FENCE(w, o);
+
+	if (riscv_use_sbi_for_rfence())
 		sbi_remote_fence_i(NULL);
 	else
 		on_each_cpu(ipi_remote_fence_i, NULL, 1);

arch/um/drivers/ubd_user.c

@@ -41,7 +41,7 @@ int start_io_thread(unsigned long sp, int *fd_out)
 	*fd_out = fds[1];
 
 	err = os_set_fd_block(*fd_out, 0);
-	err = os_set_fd_block(kernel_fd, 0);
+	err |= os_set_fd_block(kernel_fd, 0);
 	if (err) {
 		printk("start_io_thread - failed to set nonblocking I/O.\n");
 		goto out_close;

arch/um/include/asm/asm-prototypes.h

@@ -1 +1,6 @@
 #include <asm-generic/asm-prototypes.h>
+#include <asm/checksum.h>
+
+#ifdef CONFIG_UML_X86
+extern void cmpxchg8b_emu(void);
+#endif