Separate gerber files for the two PCBs

[tstum]

Hello,

Thank you very much for this project, it is really exciting to build!

Would it be possible to create two Gerber files for the main PCB and for the button PCB?
By having one Gerber file for each PCB, the production is more flexible and in some cases also cheaper because the boards could be ordered as single boards, not as panels.
If it is wanted, I can do the changes in EAGLE, but for this I would need the source files of the PCBs.

Best regards!

[206cc]

Yes, I’m currently testing the v1.8 version of the PCB (it has been ordered but has not yet arrived or been tested). If the test results are good, I will generate and release two separate Gerber files — one for the main board and one for the button board. I plan to upload them this weekend.

The v1.8 version of the PCB adds mounting holes for the Pololu D24V22F5 power module (same as in ZeroBETH), so you can choose to use either the MP1584EN or the Pololu D24V22F5 module for power supply.

[tstum]

This is great news!
Thank you very much for yourquick reply and for your continuous improvements and development to this project.

[206cc]

I have uploaded the Gerber files for version V1.8
Please refer to the links below:

• Gerber PCB V1.8 - Main & Button Panelized
• Gerber PCB V1.8 - Main Board Only
• Gerber PCB V1.8 - Button Board Only

https://github.com/206cc/PicoBETH/blob/main/docs/2.Hardware_Setup.md#gerber-file-downloads-v18

[tstum]

Thank you very much, I just ordered and the single boards were much cheaper, as expected.
Thank you very much for your help!