Deployed 786d773 with MkDocs version: 1.6.1

3DCoded · 3DCoded · commit 9e40bc36282b · 2025-10-27T08:26:58.000-04:00
diff --git a/compare/index.html b/compare/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Not sure if you want to use the 3MS? Check this comparison between several common multimaterial systems.">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/compare/">
diff --git a/contributing/devsetup/index.html b/contributing/devsetup/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Follow this guide to setup your system for development with the 3MS.">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/contributing/devsetup/">
diff --git a/contributing/index.html b/contributing/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="If you want to contribute to the 3MS project, follow the instructions below.">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/contributing/">
diff --git a/controllers/bttmmb/index.html b/controllers/bttmmb/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Max filament units: 4">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/controllers/bttmmb/">
diff --git a/controllers/bttoctopusmain/index.html b/controllers/bttoctopusmain/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Max filament units: 4">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/controllers/bttoctopusmain/">
diff --git a/controllers/geetech-a30t/index.html b/controllers/geetech-a30t/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Contributed by @ImChrono">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/controllers/geetech-a30t/">
diff --git a/controllers/index.html b/controllers/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Follow this guide to determine which controller to use in your 3MS.">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/controllers/">
diff --git a/controllers/mellowflyd7/index.html b/controllers/mellowflyd7/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Max filament units: 7">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/controllers/mellowflyd7/">
diff --git a/controllers/minirambo/index.html b/controllers/minirambo/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Max filament units: 4">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/controllers/minirambo/">
diff --git a/controllers/skrminie3v2/index.html b/controllers/skrminie3v2/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Max filament units: 4">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/controllers/skrminie3v2/">
diff --git a/controllers/zm384main/index.html b/controllers/zm384main/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Max filament units: 3">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/controllers/zm384main/">
diff --git a/de/compare/index.html b/de/compare/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Du bist dir unsicher ob du das 3MS verwenden willst? Schau dir doch diesen Vergleich verschiedener, verbreiteter Multimaterial-Systeme an.">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/de/compare/">
diff --git a/de/contributing/devsetup/index.html b/de/contributing/devsetup/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Folge dieser Anleitung, um dein System für die Entwicklung mit dem 3MS einzurichten.">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/de/contributing/devsetup/">
diff --git a/de/contributing/index.html b/de/contributing/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Wenn du zum 3MS-Projekt beitragen möchtest, befolge die folgenden Anweisungen.">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/de/contributing/">
diff --git a/de/controllers/bttmmb/index.html b/de/controllers/bttmmb/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Max filament units: 4">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/de/controllers/bttmmb/">
diff --git a/de/controllers/bttoctopusmain/index.html b/de/controllers/bttoctopusmain/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Max filament units: 4">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/de/controllers/bttoctopusmain/">
diff --git a/de/controllers/geetech-a30t/index.html b/de/controllers/geetech-a30t/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Contributed by @ImChrono">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/de/controllers/geetech-a30t/">
diff --git a/de/controllers/index.html b/de/controllers/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Folge diesem Guide um festzulegen welches Kontrollboard du in deinem 3MS verwenden kannst.">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/de/controllers/">
diff --git a/de/controllers/mellowflyd7/index.html b/de/controllers/mellowflyd7/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Max filament units: 7">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/de/controllers/mellowflyd7/">
diff --git a/de/controllers/minirambo/index.html b/de/controllers/minirambo/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Max filament units: 4">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/de/controllers/minirambo/">
diff --git a/de/controllers/skrminie3v2/index.html b/de/controllers/skrminie3v2/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Max filament units: 4">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/de/controllers/skrminie3v2/">
diff --git a/de/controllers/zm384main/index.html b/de/controllers/zm384main/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Max filament units: 3">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/de/controllers/zm384main/">
diff --git a/de/filUnitBOM/index.html b/de/filUnitBOM/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Pro Filament-Einheit benötigst du folgendes:">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/de/filUnitBOM/">
@@ -1470,6 +1472,9 @@ <h1>filUnitBOM</h1>
 
 
 
+  
+  
+
 
 
   
diff --git a/de/guides/generator/index.html b/de/guides/generator/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Folge diesem Guide um eine Custom-Config für dein 3MS zu generieren.">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/de/guides/generator/">
@@ -1793,6 +1795,9 @@ <h4 id="mcu-name">MCU Name</h4>
 
 
 
+  
+  
+
 
 
   
diff --git a/de/guides/steppercurrent/index.html b/de/guides/steppercurrent/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Tuning stepper current is an important part of any 3D printer, including MMU&#x27;s. Follow this guide to find the optimal run_current setting for your 3MS gear steppers.">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/de/guides/steppercurrent/">
diff --git a/de/index.html b/de/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="&quot;3MS&quot; ist eine Abkürzung für &quot;MMMS&quot;, was für Modular Multi Material System steht">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/de/">
diff --git a/de/instructions/calibration/index.html b/de/instructions/calibration/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Follow this guide to calibrate your 3MS.">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/de/instructions/calibration/">
diff --git a/de/instructions/config/index.html b/de/instructions/config/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Nach dem Installieren der Happy Hare Firmware musst du ein paar Einstellungen vornehmen, bevor du mit mehreren Materialien drucken kannst.">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/de/instructions/config/">
diff --git a/de/instructions/firstprint/index.html b/de/instructions/firstprint/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Congratulations on building your 3MS! Now to get started with a first print.">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/de/instructions/firstprint/">
diff --git a/de/instructions/software-setup/index.html b/de/instructions/software-setup/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="https://github.com/moggieuk/Happy-Hare/wiki/Quick-Start-3MS">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/de/instructions/software-setup/">
diff --git a/de/kits/tour/index.html b/de/kits/tour/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="After several months of planning and preparation, I am super excited to release this first look for 3MS kits.">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/de/kits/tour/">
diff --git a/filUnitBOM/index.html b/filUnitBOM/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="For each filament unit, purchase the following:">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/filUnitBOM/">
@@ -1468,6 +1470,9 @@ <h1>filUnitBOM</h1>
 
 
 
+  
+  
+
 
 
   
diff --git a/guides/generator/index.html b/guides/generator/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Follow this guide to create a custom configuration for your 3MS.">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/guides/generator/">
diff --git a/guides/steppercurrent/index.html b/guides/steppercurrent/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Tuning stepper current is an important part of any 3D printer, including MMU&#x27;s. Follow this guide to find the optimal run_current setting for your 3MS gear steppers.">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/guides/steppercurrent/">
diff --git a/index.html b/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="The 3MS is short for MMMS, which stands for Modular Multi Material System">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/">
diff --git a/instructions/calibration/index.html b/instructions/calibration/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Follow this guide to calibrate your 3MS.">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/instructions/calibration/">
diff --git a/instructions/config/index.html b/instructions/config/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="After installing Happy Hare firmware, there are some configurations you need to go through before printing in multimaterial.">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/instructions/config/">
diff --git a/instructions/firstprint/index.html b/instructions/firstprint/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="Congratulations on building your 3MS! Now to get started with a first print.">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/instructions/firstprint/">
diff --git a/kits/tour/index.html b/kits/tour/index.html
@@ -6,6 +6,8 @@
       <meta charset="utf-8">
       <meta name="viewport" content="width=device-width,initial-scale=1">
       
+        <meta name="description" content="After several months of planning and preparation, I am super excited to release this first look for 3MS kits.">
+      
       
       
         <link rel="canonical" href="https://3ms.3dcoded.xyz/kits/tour/">
diff --git a/sitemap.xml b/sitemap.xml
diff --git a/sitemap.xml.gz b/sitemap.xml.gz
