🚂🚃🚃 @Koenkk @Nerivec @svhelge @burmistrzak @sjorge @chrivers @chris-1243 @ams2990 @hmmbob @zen2
Hi! I found many issues surrounding light control and color conversion. I'm creating this tracker to document them and bring some attention. We may also create dedicated issues to discuss in-depth, although I feel most fixes will be easy.
HA (Z2M) - input for color is displayed like an HS color wheel, but it sends XY data to mqtt
Invalid color mode 'hs' received zigbee2mqtt#28757 (comment)
Invalid color mode 'color_temp' received zigbee2mqtt#31320 ?
WF - input for XY color is displayed like an HS slider
ZHC - rgb/hex mqtt command is converted to XY, even if HS is available
ZHC - HS command fails when not supported, without fallback to XY
Disable enhanced hue by default & convert HS to XY, on XY-only bulbs #11840
ZHC - enhancedHue defaults to enabled
Disable enhanced hue by default & convert HS to XY, on XY-only bulbs #11840
ZHC - enhancedHue allows 0-65535 precision, but mqtt input takes only 0-360
ZH - when enhanced HS fails with unsupported cluster command, no error shows up in Z2M
ZH - when changing Tuya attribute DND returns unsupported cluster , no error shows up in Z2M
ZH - startUpColorTemperature = previous fails in ZH with invalid value
startUpColorTemperature requires max of 65279 zigbee2mqtt#31452
ZHC - incomplete implementation of Philips Hue
philips: rewrite manuSpecificPhilips2 encode/decode, fix effects and state reporting #11655
ZHC - incomplete definitions (many devices missing supported color modes and useful attributes)
Improve IKEA KAJPLATS #11849
ZHC - generated definition omits useful attributes (onOffTransition , executeIfOff... )
ZHC - confusing unit (deciseconds) for onOffTransition... attributes
Change _onOffTransitionTime_ unit to seconds #11854
ZHC - enabling Z2M transition causes lights to turn on at 1% brightness from bound remotes
Support OffWithEffect for Philips Hue & Co. #11197
WF - startUpCurrentLevel = 255 (previous) is not displayed correctly
WF - there is no input for MoveToLevel without OnOff (also Move/Stop, Step )
HA - temperature slider and color wheel continuously send mqtt, spamming the network (brightness slider is ok)
🚂🚃🚃 @Koenkk @Nerivec @svhelge @burmistrzak @sjorge @chrivers @chris-1243 @ams2990 @hmmbob @zen2
Hi! I found many issues surrounding light control and color conversion. I'm creating this tracker to document them and bring some attention. We may also create dedicated issues to discuss in-depth, although I feel most fixes will be easy.
HA (Z2M) - input for color is displayed like an HS color wheel, but it sends XY data to mqtt
Invalid color mode 'hs' received zigbee2mqtt#28757 (comment)
Invalid color mode 'color_temp' received zigbee2mqtt#31320 ?
WF - input for XY color is displayed like an HS slider
ZHC - rgb/hex mqtt command is converted to XY, even if HS is available
ZHC - HS command fails when not supported, without fallback to XY
Disable enhanced hue by default & convert HS to XY, on XY-only bulbs #11840
ZHC - enhancedHue defaults to enabled
Disable enhanced hue by default & convert HS to XY, on XY-only bulbs #11840
ZHC - enhancedHue allows 0-65535 precision, but mqtt input takes only 0-360
ZH - when enhanced HS fails with unsupported cluster command, no error shows up in Z2M
ZH - when changing Tuya attribute DND returns unsupported cluster, no error shows up in Z2M
ZH - startUpColorTemperature = previous fails in ZH with invalid value
startUpColorTemperature requires max of 65279 zigbee2mqtt#31452
ZHC - incomplete implementation of Philips Hue
philips: rewrite manuSpecificPhilips2 encode/decode, fix effects and state reporting #11655
ZHC - incomplete definitions (many devices missing supported color modes and useful attributes)
Improve IKEA KAJPLATS #11849
ZHC - generated definition omits useful attributes (onOffTransition, executeIfOff...)
ZHC - confusing unit (deciseconds) for onOffTransition... attributes
Change _onOffTransitionTime_ unit to seconds #11854
ZHC - enabling Z2M transition causes lights to turn on at 1% brightness from bound remotes
Support
OffWithEffectfor Philips Hue & Co. #11197WF - startUpCurrentLevel = 255 (previous) is not displayed correctly
WF - there is no input for MoveToLevel without OnOff (also Move/Stop, Step)
HA - temperature slider and color wheel continuously send mqtt, spamming the network (brightness slider is ok)