NBMiner v39.6 #540
Replies: 12 comments 15 replies
-
|
window 11 last update, RTX 3080 TI EVGA - Starting from 90mh, but after 5 minutes the limitation is triggered, I think the product is raw! trex miner is better - 86-90 mh stability, uptime 14 days. |
Beta Was this translation helpful? Give feedback.
-
|
Is the --enable-igpu flag broken? |
Beta Was this translation helpful? Give feedback.
-
|
windows 10 ltsc, Gainward RTX3080 LHR, 72mh@+1150mems. |
Beta Was this translation helpful? Give feedback.
-
|
Nice improvement. Stable 85-86 for 3080 Ti on HiveOS. |
Beta Was this translation helpful? Give feedback.
-
|
Can u help me? how can i install a new version manually in hiveos? im tryed here but i cant solve. =( |
Beta Was this translation helpful? Give feedback.
-
|
Why you want to install it manually? |
Beta Was this translation helpful? Give feedback.
-
|
When launching two ETH bat files for different wallets, the error "API server start failed the bound address is already in use". |
Beta Was this translation helpful? Give feedback.
-
|
I have 8 zotac hynix 3060ti lhr, if I use lhr-mode 2, it is stable, but the improvement is only 1mh per card. |
Beta Was this translation helpful? Give feedback.
-
|
This latest version does not work. 3070ti on Windows 10, nvidia 496.49 driver version. Miner is started with no particular -lhr mode, and starts well with 59mh/s on 190W, but after a few minutes it drops to 20-15mh/s.... also, memory rised to 95C with fans at 100%. If I use fans at 65% like previously, mem temp goes beyond 100C which is intolerable. I have returned to version 39.5 since |
Beta Was this translation helpful? Give feedback.
-
|
3080 LHR here... went from 64 to 72 ...however the mem is burning ! Tried to power limit, lower clock etc, nothing, memory still burning at 100 degrees (previous version was around 90 degrees) |
Beta Was this translation helpful? Give feedback.
-
|
Lock your CPU clock. |
Beta Was this translation helpful? Give feedback.
-
how do you do this in nb? |
Beta Was this translation helpful? Give feedback.
-
|
I'm seeing consistently higher memory temps as well. 3080ti that was ranging between 86 and 100 degrees on 39.5, but on 39.6 I'm going between 94 and 102. Hash rate is about 4% better but I'm not sure it's worth the consistently higher temps. |
Beta Was this translation helpful? Give feedback.
-
|
Just FYI, I have the 3080Ti FE and I am getting better hashrates in mode 1 (88MH vs 83MH, but a 5 degree increase in mem temp, so hard to tell if it's worth it). My rig is water cooled so temp is not really an issue but still would like to keep mem temp under 80. |
Beta Was this translation helpful? Give feedback.
-
Appreciate your help. Yes seems mode 2 is the way to go. Temps under control and a slightly better hashrate. I was happy with 72 on my 3080 but that mem temp 100-104 was just too much. Now going around 90 for a hash of 64-67 with less power consumption. |
Beta Was this translation helpful? Give feedback.
-
|
Ah, mine is air-cooled. Personally, I think < 100 is safe and < 90 is very safe. Unfortunately, it's difficult to find definitive information on what the actual safe junction temp is for GDDRX6. I've seen up to 105 listed as safe (I think that's what is meant by the /+105 here). Still considering replacing the thermal pads on my card but I've seen mixed results with that online - lots of people say it helps, but many say it didn't make a difference and in some cases made the temps worse. ¯\_(ツ)_/¯ |
Beta Was this translation helpful? Give feedback.
-
|
Lock your core clocks guys! Thank me later! |
Beta Was this translation helpful? Give feedback.
-
|
What's the best way to lock the core clock. In MSI Afterburner if you go to the fan curve editor and hit L on a particular point on the curve, I think this just sets your max clock. I can still see the core clock bounce around. |
Beta Was this translation helpful? Give feedback.
-
|
3060ti mem +1000 mining at 45mh/s but not stable restarts program every 10 minutes |
Beta Was this translation helpful? Give feedback.
-
|
My 3070 LHR have only 39MH/s ,how can I improve it? |
Beta Was this translation helpful? Give feedback.
-
|
Trex miner lhr mode 72, power 55, mem 1450, hash 45+ |
Beta Was this translation helpful? Give feedback.
-
|
Hi, we should tuning the LHR setting? 5~10min it´s ok to be unlock ir I should try to use a LHR number above 71.0? If I use more than 71 I should get more MH/s and unstable unlockings? Thank you. |
Beta Was this translation helpful? Give feedback.
-
|
Hello, i have 2 3060 lhr v2 cards and when i using this version miner I 100% get "Provided PoW solution is invalid" what can lead to this problem? Added log. Clock: [21:43:07] INFO - etchash - Login succeeded. Thanks For response |
Beta Was this translation helpful? Give feedback.
Uh oh!
There was an error while loading. Please reload this page.
-
optimize:ethashLHR mode significant improvement:-lhr-mode 1and-lhr-mode 2-lhr-mode 1for LHR GPUs-lhr-mode 1-> 74,-lhr-mode 2-> 71-lhr-reduce-value: the amount to reduce-lhrvalue on a single-lhrtuning. defaults to0.5.-lhr-reduce-time: When LHR lock is detected, and the time since the last lock exceeds this value, the-lhrreduce will not perform. defaults to15, which means 15 minutes.-lhr-reduce-limit: the maximum number of times to reduce-lhrvalue, defaults to6.feature:ergoalso adapts the 3 new LHR options.feature: add-cmd-outputoption to specify command line outpu tostdoutorstderr,1=stdout,2=stderr, defaults to2.feature: disable SNI extension for ssl connections by default, can be enabled with-enable-snioptiondelete:cuckatoo&cuckatoo32support优化:ethashLHR 模式显著优化-lhr-mode 1（高算力模式）和-lhr-mode 2（省电模式）-lhr-mode 1-lhr-mode 1中的-lhr默认值提升到74，-lhr-mode 2中的-lhr默认值提升到71-lhr-reduce-value：单次降低的-lhr值，默认为0.5-lhr-reduce-time：距离上次被锁的时间，超过该时间则不进行-lhr降低，默认为15，即15分钟-lhr-reduce-limit：最多降低-lhr值的次数，默认为6功能:ergo同样适配-lhr-reduce-value,-lhr-reduce-time,-lhr-reduce-limit三个选项功能: 新增-cmd-output选项，可指定命令行输出到stdout或者stderr，1=stdout，2=stderr，默认为2功能: 默认对ssl连接关闭SNI扩展，可通过-enable-sni开启删除:cuckatoo及cuckatoo32算法的支持This discussion was created from the release NBMiner v39.6.
Beta Was this translation helpful? Give feedback.
All reactions