Problem with signal switching between PAL and NTSC after saving profiles/presets. #27
Description
I have the following problem: I have both NTSC and PAL consoles in operation.
When I switch from PAL to NTSC or vice versa on my GBS-C Pro without changing any settings, the signal is recognized and switches.
However, the PAL signal is very stretched.
If I adjust the PAL picture, for example, or save a preset and then switch the signal from PAL to NTSC or vice versa, the other signal is set to Passthrough or No Signal.
The fact that the PAL signals are stretched vertically and vertically, and that there are problems switching signals, seems to be a firmware issue.
I also have an ODV GBS-C (the orange one).
It doesn't have any of these problems with the standard GBS-C firmware.
That's why I flashed the GBS-C Pro firmware onto it, and then the same problems occurred.
So it seems to be a bug in the firmware.
The problem occurs with the current RetroScaler firmware
as well as with the firmware forks.
https://github.com/matosimi/gbsc-pro
https://github.com/brisma/gbsc-pro