Home

Welcome to the Roboracer Alpha™ Wiki

How to Upload Hex File to Roboracer Alpha microcontroller Using xLoader

The following steps will help us to upload HEX file on our Roboracer Alpha (Arduino Uno).

1. Download the firmware as a zip file from:- Roboracer Alpha Mu™ Firmware repository
2. Extrace the zip contents onto your PC.
3. Open xLoader
4. Browse the HEX File from RoboracerAlphaMu™/RoboracerAlphaMu™.ino.hex
5. Select the device E.g. In case of Roboracer Alpha™, it's ATmega328
6. Select COM Port, your Roboracer Alpha™ is connected to.
7. Select right baud rate in case of Arduino Uno it's 115200
8. Finally hit Upload Button