Throttlez is an 7th national technical symposium organized by the Department of Mechanical Engineering
- . It is conducted by the students and the Association of Mechanical Engineers
- every year. As a jewel in the crown, Throttlez attracts several thousand students from hundreds of colleges
- and universities across India.
-
ayushpragya the National Socio-Annual Cultural fastival of Faculty of Ayurveda, IMS BHU, Varanasi
+ is an extravagant mega fest and artistic events. host wide array of event such as story telling, fashion show,
+ beat boxing, musical jam sessions and other disparate contests. Its grandeur has earned it the fame of India's
+ biggest culturalfestival of Ayurveda. It is a 3-4 days fiesta which started in 2008 by the inspiration of Pandit
+ Madan Mohan Malviya to inculcate enthusiasm, exultation and zeal among youngsters and held every year in BHU in
+ the holy and eternal city Varanasi
+
Papers can be presented in any one of the following topics:
-
-
Hybrid vechicles
-
Electrical vehicles
-
BS6 Emission norms
-
-
-
The paper should be preferably in a power-point presentation(no word documents allowed)
-
The presentation should not exceed 10 slides
-
The max time limit for presentation is 10 mins with a further extension of about 5 mins for discussion
-
The paper presentation abstracts should be sent to throttlez2k21@gmail.com.
-
The decision taken by event co-ordinators is final and binding
-
The paper must be in .pdf or .doc or .docx formats.
-
The paper must be sent through mail. The instructions are as follows:
-
The subject must be the title of the paper.
-
The body of the mail should include - Name and Institute of participant (starting from the first author and going till the third one), Department and Year, Contact numbers, Email addresses.
-
-
-
Last date to send in the paper: 20st December 2021
-
-
-
-
-
-
-
-
-
-
-
- Paper Presentation
-
- Unleash your research skills. Put them on paper and get reviews from our highly experienced faculty panel members.
-
TIMINGs 10.30 AM - 11.40 AM
-
-
-
-
-
-
-
-
-
-
-
-
For more Information:
-
Rishi R
Ph : +91 63831-42138
-
Kishore A
Ph : +91 70104-65443
-
-
-
-
-
-
-
-
-
-
-
-
-
Auto Quiz
-
Are you a automobile enthusiast? Do you like connecting the dots? Do you love quizzing ? Or do you want to test how much you know ?
-
The Throttlez quiz is the place to be. At the end of it you are guaranteed to learn some fascinating new facts. Come prepared to have some fun.
-
Rules
-
Each team can have a maximum of 2 members
-
Event consist of 2 rounds - preliminary and final
-
Preliminary round consist of questions from general and technical automobile sector.
-
Those who cleared prelims will appear in mains
-
Final consist various rounds
-
Any electronics gadgets are strictly prohibited, if any discrepancies are found that team will disqualified from the event.
-
Event coordinator decision is final and binding.
-
-
-
-
-
-
-
- Auto Quiz
-
- Cheating on a quiz show? That's sort of like plagiarizing a comic strip.
-
TIMINGs 11.40 AM - 12.50 PM
-
-
-
-
-
-
-
-
-
-
-
For more Information:
-
Rishi R
Ph : +91 63831-42138
-
Kishore A
Ph : +91 70104-65443
-
-
-
-
-
-
-
-
-
-
-
-
-
Mr. Manufacturer
-
-
-
Manufacturing is not a skill it's an happiness
-
Manufacturer leads to change the world with his great processing ideas
-
Rules
-
-
Each team can have a maximum of 2 members.
-
Materials will be provided during the event.
-
Event duration:( respective time)
-
Event consist of 2 rounds.
-
First (respective time) will be alloted for answering questionnaire.
-
These teams who clear the round 1 will go to next round
-
Next (respective time) for machining the given specimen
-
The decision of event coordinator is final and binding.
-
-
-
-
-
-
-
- Mr. Manufacturer
-
- Manufacturing is not a skill it's an happiness,Manufacturer leads to change the
-world with his great processing ideas
-
TIMINGs 10.30 AM - 11.40 AM
-
-
-
-
-
-
-
-
-
-
-
For more Information:
-
Rishi R
Ph : +91 63831-42138
-
Kishore A
Ph : +91 70104-65443
-
-
-
-
-
-
-
-
-
-
-
-
RC CAR
-
Radio-Radio-Controlled Cars Use A Common Set Of Components For Their Control
- And Operation. All Cars Requirs A Transmitter,Which Has The Joysticks For Control,Or In Pistol
- Grip Form, A Trigger For Throttle And A Wheel For Turning And A Receiver Which Sits Inside
- The Car.
-
-
Rules
-
-
Each team can have a maximum of 2 members
-
Car with or without body can be allowed
-
Engine type car is not allowed in the event
-
Maximum width of the track is ()
-
Time penalty will be added if the car touches the boundary line.
-
If the car leaves the track then it's disqualified
-
Battery should not be more than 12V
-
RPM of the car should not be more than 800
-
Organizer decision is final and binding.
-
-
-
-
-
-
- RC CAR
-
- Radio-Radio-Controlled Cars Use A Common Set Of Components For Their Control And Operation .
-
-
TIMINGs 12.50 PM - 1.40 PM
-
-
-
-
-
-
-
-
-
-
-
-
For more Information:
-
Rishi R
Ph : +91 63831-42138
-
Kishore A
Ph : +91 70104-65443
-
-
-
-
-
-
-
-
-
-
-
PIT STOP
-
- The Bottle Is Partly Filled With Water And Sealed.The Bottle Is Then
- Pressurized With A Gas ,Usually Air Compressor,Or Cylinder .
-
-
Rules
-
-
The participants are required to design and build a single stage water rocker.
-
Organiser's decision will be final.
-
Multi stage water rocket is not allowed in this event.
-
Only plastic soft drink bottles must be used for the rocket body.
-
Maximum capacity of bottle is 2 litres.
-
The water rocket must use only compressed ambient atmospheric air as it's source of energy. Only tap water should be used in the rocket and the water will be provided by the organisers. Water bought by the team won't be allowed in the rockets.
-
No chemicals or aerated water should be added for launching.
-
The pressure inside the container(rocket body) before launch should be given by organiser.
-
No component of the rocket should get detached from the mainframe during the flight of the rocket. If any part gets detached then the team will be disqualified.
-
Each team can have a maximum of 2 participants.
-
The range of flight is the distance between the point of launch and the point of it's first impact.
-
-
-
-
-
-
- Pit Stop
-
- The Bottle Is Partly Filled With Water And Sealed.The Bottle Is Then
-Pressurized With A Gas ,Usually Air Compressor,Or Cylinder .
-
TIMINGs 12.50 PM - 1.40 PM
-
-
-
-
-
-
-
-
-
-
-
-
For more Information:
-
Rishi R
Ph : +91 63831-42138
-
Kishore A
Ph : +91 70104-65443
-
-
-
-
-
-
-
-
-
-
-
Mr. CAD
-
Designers alert! it's your field, register soon and have some fun with this creative event
- with your intellectual mind
-
RULES
-
-
Individuals only allowed
-
Event consist of two rounds preliminary and system drawing.
-
Participants who clear preliminary are allowed to take part in the next round
-
Event duration(respective time).
-
First( respective time) will be preliminary round.
-
Remaining (respective time) will be system drawing.
-
Participants will be provided with question and answer sheet in preliminary round.
-
System drawing round will include drawing and assembly of machine components
-
Decision of coordinator is final bad binding.
-
-
-
-
-
-
-
-
-
-
- Mr. CAD
-
- Designers alert! it's your field, register soon and have some fun with this creative event with your intellectual mind
-
TIMINGs 11.40 AM - 12.50 PM
-
-
-
-
-
-
-
-
-
-
-
-
For more Information:
-
Rishi R
Ph : +91 63831-42138
-
Kishore A
Ph : +91 70104-65443
-
-
-
-
-
-
-
-
-
-
-
-
-
3D Printing Workshop
-
Rules
-
-
Entry Fees Rs. 150 (Seperately)
-
Students are allowed to attend any one among the two workshop
-
Students are requested to maintain their decorum while attending the session and for any queries please feel free to contact the coordinators and not the administration of DCE campus.
-
Candidates are requested to be present at the venue at least 10 mins prior to the commencement of the workshop.
-
-
-
-
-
-
-
-
-
- 3D Printing Workshop
-
- Come and Learn 3D Printing Technology A Workshop Initiative by Throttlez
-
-
TIMINGs Slot I :10.00 AM - 12.00 PM Slot II : 12.00 PM - 2.00 PM
-
-
-
-
-
-
-
-
-
-
-
-
-
For more Information:
-
Rishi R
Ph : +91 63831-42138
-
Kishore A
Ph : +91 70104-65443
-
-
-
-
-
-
-
-
-
-
-
-
-
Mobile photography
-
Snap Your Way to the Top
-
-
Are you always looking for reasons to pick up a mobile and take pictures of anything and everything? Well, we’ll give you a reason.
-
-
Capture captivating photos that capture the light and have a focus on colours to win prizes!
-
-
-
RULES
-
-
-
Photos should be based on either in the mentioned theme.
-
There is no limit for number of entries per contestant.
-
Photos with proof of heavy post-processing will be eliminated.
-
A winner will be declared for each category based on
-
Jury member's decision.
-
-
-
-
-
-
-
- Mobile Photography
-
- Register here and take your creativity
- and admiring Skills together to Capture a perfect shot.
-
-
TIMINGs 12.50 PM - 1.40 PM
-
-
-
-
-
-
-
-
-
-
-
-
For more Information:
-
Raja rajan V V
Ph : +91 97916-28811
-
Aravind C
Ph : +91 95853-77010
-
-
-
-
-
-
-
-
-
-
-
-
-
CONNEXION
-
This is not a technical event. ‘nough said.
- So you just wanna have fun? Had enough of tech-talk?
-
This Amazing Game Is About Movies And General Knowledge You Will Have Lot
- Of Fun Watching This You Can Improve Your General Knowledge
-
-
-
-
-
-
-
-
- CONNEXION
-
- This Amazing Game Is About Movies And General Knowledge You Will Have Lot Of Fun Watching This You Can Improve Your General Knowledge
-
TIMINGs 11.40 AM - 12.50 PM
-
-
-
-
-
-
-
-
-
-
-
-
For more Information:
-
Raja rajan V V
Ph : +91 97916-28811
-
Aravind C
Ph : +91 95853-77010
-
-
-
-
-
-
-
-
-
-
-
-
TECH MEMES
-
This is not a technical event. ‘nough said.
- So you just wanna have fun?
- Then MEME CREATION ku vaanga ji, vaanga ji, vaanga ji!
- Enjoy panalam :P
-
-
-
-
-
-
- Meme Creation
-
- Whatever the problems are Don't worry because memers are here to make you laugh,Register soon to show your MEME skills.
-