Add missing link for billet elevator bearing block

Author: michael-m-2983

docs/wiki/the-shrieking-eel.md

@@ -42,7 +42,7 @@ These components were used for the brackets and mounts:
 
 ### Elevator
 
-Our robot has a 2-stage elevator with an arm/wrist mechanism on the top. The elevator is made of 1/16” 2x1 box tubes. It uses a [Billet Elevator Bearing Block] by [[Swerve Drive Specialties|SDS]] for the bearing, and [Dyneema rope](https://www.dyneema.com/) and #25 roller chain. The elevator is driven by Kraken motors, and there are constant force springs that cancel weight to allow it to accelerate quickly.
+Our robot has a 2-stage elevator with an arm/wrist mechanism on the top. The elevator is made of 1/16” 2x1 box tubes. It uses a [Billet Elevator Bearing Block](https://www.swervedrivespecialties.com/products/billet-elevator-bearing-block) by [[Swerve Drive Specialties|SDS]] for the bearing, and [Dyneema rope](https://www.dyneema.com/) and #25 roller chain. The elevator is driven by Kraken motors, and there are constant force springs that cancel weight to allow it to accelerate quickly.
 
 !!! todo "explain what the dyneema rope and #25 roller chain are used for."