15min Prices not applied to HTTP call ../energyprice.json

[Brors94]

Http 15min Prices (Price Region NO3 Norway)

I have setup the 15min resolution and seems to only get the hourly prices from the:
/energyprice.json

Response from the api call:
{"currency":"NOK","source":"EOE","00":0.9795,"01":0.9158,"02":0.8637,"03":0.8271,"04":0.8048,"05":0.8348,"06":0.8669,"07":0.8821,"08":0.8981,"09":0.9125,"10":0.9149,"11":0.8676,"12":0.8354,"13":0.8406,"14":0.8385,"15":0.8440,"16":0.8839,"17":0.8429,"18":0.7197,"19":0.6305,"20":0.6521,"21":0.6543,"22":0.7692,"23":1.0049,"24":1.1983,"25":1.2228,"26":0.9627,"27":0.8668,"28":1.0082,"29":0.8993,"30":null,"31":null,"32":null,"33":null,"34":null,"35":null}

This gives 29 values at 18:10 that is expected with the last 6 hour values for today and the 24 for tomorrow.
But with 15min I expect 116 values.
The values above also matches the prices for 60min Resolution.

To Reproduce
http get to the /energyprice.json with the 15min resolution settings enabled.

Expected behavior
expect 15min prices

Hardware information:

• Country: Norway
• Meter: Kaifa
• Encryption enabled: no
• AMS reader: Pow-U

Relevant firmware information:

• Version: 2.5.6
• MQTT: no
• HAN GPIO: Chip: esp32s2 (160MHz)
• HAN baud and parity: 2400 8E1
• ENTSO-E API enabled: no

[ArnieO]

You're right!
With the setting you show above, 15-minute pricing is shown in the GUI but the response to the HTTP call .../energyprice.json still shows 60-minute prices.
This should be improved.

Thank you for noticing this - and notifying us!

[gskjold]

You can use importprice.json and exportprice.json to get the full resolution.

Not modifying energyprice.json was intentional. The way it is defined is that all the price points have their own key mapping, which has a larger than necessary data footprint. The new format in importprice.json and exportprice.json contains an array, which is much more space efficient. It also contains all the prices for current day and next day, not just upcoming prices. It has a cursor variable that defines which price in the array is the current.

I see that I have forgotten to update the documentation, so I will spend some time doing that.