WLED + hyperHDR issue

[brzozex]

Hi guys,

I can't figure out how to set it up so it will automatically switch on when i reset/reboot/power off/on pc.

HyperHDR showing this error after starting

Device disabled, device 'wled' signals error: ' Open error. UDP Socket not initialised!'

led hardware/controller set to wled, tried udpraw same thing happens after restart.

Only way to get it working is to change controller in led hardware to something else - save and than set it back to wled - save

Do i miss any setting in wled config??

wled version 0.13.1 hyperHDR version 18.0.0.0beta3

[awawa-dev]

Real error happens before that message. FULL logs please.

[brzozex]

full log
2022-07-22T00:52:55.729Z [MAIN] Database path: 'C:/Users/PETER/.hyperhdr/db/hyperhdr.db', readonlyMode = disabled
2022-07-22T00:52:55.729Z [MAIN] Starting HyperHdr - 18.0.0.0beta3, (HEAD detached at 8d314bc) (Awawa-5b8ed09/8d314bc-1654356765), built: Jun 4 2022:15:50:35
2022-07-22T00:52:55.729Z [MAIN] Set user data path to 'C:/Users/PETER/.hyperhdr'
2022-07-22T00:52:55.731Z [DB] Database opened: C:/Users/PETER/.hyperhdr/db/hyperhdr.db
2022-07-22T00:52:55.748Z [SETTINGSMGR] Settings database initialized
2022-07-22T00:52:55.748Z [HYPERHDR] Sound device is disabled
2022-07-22T00:52:55.759Z [MEDIA_FOUNDATION:AUTO] Cropping image: width=0 height=0; crop: left=0 right=0 top=0 bottom=0
2022-07-22T00:52:55.760Z [MEDIA_FOUNDATION:AUTO] Starting to enumerate video capture devices
2022-07-22T00:52:55.760Z [MEDIA_FOUNDATION:AUTO] (MFGrabber.cpp:413) Detected 0 devices
2022-07-22T00:52:55.760Z [MEDIA_FOUNDATION:AUTO] Restarting video grabber is now blocked due to reloading of the configuration
2022-07-22T00:52:55.760Z [MEDIA_FOUNDATION:AUTO] Cropping image: width=0 height=0; crop: left=0 right=0 top=0 bottom=0
2022-07-22T00:52:55.760Z [Media Foundation:auto] (GrabberWrapper.cpp:73) CEC keycode. Start: 0, stop: 0
2022-07-22T00:52:55.760Z [MEDIA_FOUNDATION:AUTO] (Grabber.cpp:259) setBrightnessContrastSaturationHue nothing changed
2022-07-22T00:52:55.760Z [MEDIA_FOUNDATION:AUTO] (MFGrabber.cpp:175) setHdrToneMappingMode to: Disabled
2022-07-22T00:52:55.760Z [MEDIA_FOUNDATION:AUTO] (Grabber.cpp:168) setFpsSoftwareDecimation to: 1
2022-07-22T00:52:55.760Z [SIGNAL_OLD] (DetectionManual.cpp:85) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
2022-07-22T00:52:55.760Z [SIGNAL_OLD] (DetectionManual.cpp:75) Signal threshold set to: {12, 12, 12} and frames: 200
2022-07-22T00:52:55.760Z [SIGNAL_AUTO] (DetectionAutomatic.cpp:384) Automatic signal detection -> errorTolerance: 9, modelTolerance: 90, sleepTime: 5000, wakeTime: 1000
2022-07-22T00:52:55.760Z [MEDIA_FOUNDATION:AUTO] (Grabber.cpp:367) setDeviceVideoStandard preparing to restart video grabber. Old: '' new: 'auto'
2022-07-22T00:52:55.760Z [MEDIA_FOUNDATION:AUTO] Delayed restart of the grabber due to change of selected device
2022-07-22T00:52:55.760Z [MEDIA_FOUNDATION:AUTO] (Grabber.cpp:186) Force encoding to: NO_CHANGE (old: NO_CHANGE)
2022-07-22T00:52:55.760Z [MEDIA_FOUNDATION:AUTO] setQFrameDecimation is now: disabled
2022-07-22T00:52:55.760Z [Media Foundation:auto] (GrabberWrapper.cpp:543) Frame cache is: enabled
2022-07-22T00:52:55.761Z [DX11_SYSTEM:AUTO] Cropping image: width=0 height=0; crop: left=0 right=0 top=0 bottom=0
2022-07-22T00:52:55.764Z [DX11_SYSTEM:AUTO] Restarting video grabber is now blocked due to reloading of the configuration
2022-07-22T00:52:55.764Z [DX11_SYSTEM:AUTO] (Grabber.cpp:145) Set new width: 512, height: 512 for capture
2022-07-22T00:52:55.764Z [DX11_SYSTEM:AUTO] (Grabber.cpp:322) setWidthHeight preparing to restarting video grabber 0
2022-07-22T00:52:55.764Z [DX11_SYSTEM:AUTO] Delayed restart of the grabber due to change of the capturing resolution
2022-07-22T00:52:55.764Z [DX11_SYSTEM:AUTO] Delayed restart of the grabber due to change of the framerate
2022-07-22T00:52:55.764Z [DX11_SYSTEM:AUTO] setHdrToneMappingMode to: enable, but the LUT file is currently unloaded
2022-07-22T00:52:55.764Z [DX11_SYSTEM:AUTO] LUT file is not found here: C:/Users/PETER/.hyperhdr/lut_lin_tables.3d
2022-07-22T00:52:55.764Z [DX11_SYSTEM:AUTO] (Grabber.cpp:445) LUT file found: C:/HyperHDR/bin/lut_lin_tables.3d
2022-07-22T00:52:55.764Z [DX11_SYSTEM:AUTO] (Grabber.cpp:464) Index 0 for HDR RGB
2022-07-22T00:52:55.775Z [DX11_SYSTEM:AUTO] Found and loaded LUT: 'C:/HyperHDR/bin/lut_lin_tables.3d'
2022-07-22T00:52:55.775Z [DX11_SYSTEM:AUTO] Signal detection is now enabled
2022-07-22T00:52:55.775Z [SIGNAL_OLD] (DetectionManual.cpp:85) Signal detection area set to: 0.250000,0.250000 x 0.750000,0.750000
2022-07-22T00:52:55.775Z [SIGNAL_OLD] (DetectionManual.cpp:75) Signal threshold set to: {12, 12, 12} and frames: 200
2022-07-22T00:52:55.775Z [DX11_SYSTEM:AUTO] (Grabber.cpp:367) setDeviceVideoStandard preparing to restart video grabber. Old: '' new: 'auto'
2022-07-22T00:52:55.775Z [DX11_SYSTEM:AUTO] Delayed restart of the grabber due to change of selected device
2022-07-22T00:52:55.782Z [SETTINGSMGR] Settings database initialized
2022-07-22T00:52:55.782Z [BLACKBORDER] Set mode to: default
2022-07-22T00:52:55.782Z [COMPONENTREG0] Blackborder detector: enabled
2022-07-22T00:52:55.782Z [IMAGETOLED0] (ImageProcessor.cpp:163) Set LED mapping type to advanced
2022-07-22T00:52:55.782Z [IMAGETOLED0] (ImageProcessor.cpp:147) setSparseProcessing to 0
2022-07-22T00:52:55.783Z [RGB_TRANSFORM0] RGB transform classic_config: 1, saturationGain: 1.000000, luminanceGain: 1.000000, backlightThreshold: 1
2022-07-22T00:52:55.783Z [RGB_TRANSFORM0] setBacklightThreshold: 1
2022-07-22T00:52:55.783Z [ADJUST_RED0] Set correction to 255
2022-07-22T00:52:55.783Z [ADJUST_BLUE0] Set correction to 255
2022-07-22T00:52:55.783Z [ADJUST_GREEN0] Set correction to 255
2022-07-22T00:52:55.787Z [JSONSERVER] (JsonServer.cpp:24) Created instance
2022-07-22T00:52:55.791Z [JSONSERVER] Started on port 19444
2022-07-22T00:52:55.816Z [MAIN] start systray
2022-07-22T00:52:55.784Z [HYPERHDR0] Led strip RGB order is: rgb
2022-07-22T00:52:55.784Z [DB] Database opened: C:/Users/PETER/.hyperhdr/db/hyperhdr.db
2022-07-22T00:52:55.788Z [SMOOTHING0] Clearing queued colors before: enabling
2022-07-22T00:52:55.788Z [SMOOTHING0] Smoothing queue is cleared
2022-07-22T00:52:55.788Z [COMPONENTREG0] Smoothing: enabled
2022-07-22T00:52:55.788Z [SMOOTHING0] Creating config (0) => type: Alternative, dirMode: false, pause: false, settlingTime: 150ms, interval: 20ms (50Hz), antiFlickTres: 0, antiFlickStep: 0, antiFlickTime: 0
2022-07-22T00:52:55.788Z [SMOOTHING0] Clearing queued colors before: enabling. Smoothing configuration changed: restarting timer.
2022-07-22T00:52:55.788Z [SMOOTHING0] Smoothing queue is cleared
2022-07-22T00:52:55.788Z [SMOOTHING0] Selecting config (0) => type: Alternative, dirMode: false, pause: false, settlingTime: 150ms, interval: 20ms (50Hz), antiFlickTres: 0, antiFlickStep: 0, antiFlickTime: 0
2022-07-22T00:52:55.788Z [SMOOTHING0] Selecting config (0) => type: Alternative, dirMode: false, pause: false, settlingTime: 150ms, interval: 20ms (50Hz), antiFlickTres: 0, antiFlickStep: 0, antiFlickTime: 0
2022-07-22T00:52:55.789Z [MUXER0] Register new input 'System/COLOR' with priority 254 as inactive
2022-07-22T00:52:55.789Z [MUXER0] (PriorityMuxer.cpp:210) Priority 254 is now active
2022-07-22T00:52:55.789Z [MUXER0] Set visible priority to 254
2022-07-22T00:52:55.789Z [HYPERHDR0] New priority[254], previous [255]
2022-07-22T00:52:55.789Z [HYPERHDR0] New source available -> switch LED-Device on
2022-07-22T00:52:55.789Z [SMOOTHING0] Clearing queued colors before: enabling
2022-07-22T00:52:55.789Z [SMOOTHING0] Smoothing queue is cleared
2022-07-22T00:52:55.789Z [LEDDEVICE_WLED] (LedDevice.cpp:102) Enable device
2022-07-22T00:52:55.789Z [LEDDEVICE_WLED] Device disabled, device 'wled' signals error: ' Open error. UDP Socket not initialised!'
2022-07-22T00:52:55.789Z [LEDDEVICE_WLED] Start LedDevice 'wled'.
2022-07-22T00:52:55.789Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:51)
2022-07-22T00:52:55.789Z [LEDDEVICE_WLED] (LedDevice.cpp:164) deviceConfig: [{"colorOrder":"rgb","currentLedCount":98,"hardwareLedCount":98,"host":"192.168.1.55:80","maxRetry":60,"refreshTime":0,"type":"wled"}]
2022-07-22T00:52:55.789Z [LEDDEVICE_WLED] (LedDevice.cpp:228) RefreshTime updated to 0ms
2022-07-22T00:52:55.789Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:59) DeviceType : wled
2022-07-22T00:52:55.789Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:60) LedCount : 98
2022-07-22T00:52:55.789Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:63) Max retry : 60
2022-07-22T00:52:55.789Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:105)
2022-07-22T00:52:55.789Z [HYPERHDR] Initial background color set (0 0 0)
2022-07-22T00:52:55.789Z [MUXER0] Register new input 'System/SYSTEMGRABBER' with priority 245 as inactive
2022-07-22T00:52:55.789Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:116) [1]
2022-07-22T00:52:55.789Z [COMPONENTREG0] System capture device: enabled
2022-07-22T00:52:55.817Z [DX11_SYSTEM:AUTO] (DxGrabber.cpp:170) init
2022-07-22T00:52:55.817Z [DX11_SYSTEM:AUTO] (DxGrabber.cpp:189) Forcing auto discovery device
2022-07-22T00:52:55.817Z [DX11_SYSTEM:AUTO] (DxGrabber.cpp:194) Auto discovery set to \.\DISPLAY1|NVIDIA GeForce RTX 3070
2022-07-22T00:52:55.817Z [DX11_SYSTEM:AUTO] *************************************************************************************************
2022-07-22T00:52:55.817Z [DX11_SYSTEM:AUTO] Starting DX grabber. Selected: '\.\DISPLAY1|NVIDIA GeForce RTX 3070' max width: 512 (512) @ 30 fps
2022-07-22T00:52:55.817Z [DX11_SYSTEM:AUTO] *************************************************************************************************
2022-07-22T00:52:55.872Z [DX11_SYSTEM:AUTO] Selected D3D_DRIVER_TYPE_UNKNOWN
2022-07-22T00:52:55.872Z [DX11_SYSTEM:AUTO] LUT file is not found here: C:/Users/PETER/.hyperhdr/lut_lin_tables.3d
2022-07-22T00:52:55.872Z [DX11_SYSTEM:AUTO] (Grabber.cpp:445) LUT file found: C:/HyperHDR/bin/lut_lin_tables.3d
2022-07-22T00:52:55.872Z [DX11_SYSTEM:AUTO] (Grabber.cpp:464) Index 0 for HDR RGB
2022-07-22T00:52:55.880Z [DX11_SYSTEM:AUTO] Found and loaded LUT: 'C:/HyperHDR/bin/lut_lin_tables.3d'
2022-07-22T00:52:55.880Z [DX11_SYSTEM:AUTO] Device initialized
2022-07-22T00:52:55.880Z [DX11_SYSTEM:AUTO] Started
2022-07-22T00:52:55.789Z [LEDDEVICE_WLED] (LedDevice.cpp:164) deviceConfig: [{"colorOrder":"rgb","currentLedCount":98,"hardwareLedCount":98,"host":"192.168.1.55","maxRetry":60,"port":19446,"refreshTime":0,"type":"wled"}]
2022-07-22T00:52:55.789Z [LEDDEVICE_WLED] (LedDevice.cpp:228) RefreshTime updated to 0ms
2022-07-22T00:52:55.789Z [LEDDEVICE_WLED] (ProviderUdp.cpp:69) Successfully parsed 192.168.1.55 as an IP-address.
2022-07-22T00:52:55.789Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:94) Hostname/IP : 192.168.1.55
2022-07-22T00:52:55.789Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:95) Port : 1
2022-07-22T00:52:55.789Z [BOBLIGHT] Instance created
2022-07-22T00:52:55.790Z [LEDDEVICE_WLED] (LedDeviceWled.cpp:99) [0]
2022-07-22T00:52:55.881Z [HYPERMANAGER] HyperHDR instance 'wled1' has been started
2022-07-22T00:52:55.881Z [DAEMON] Unload CEC
2022-07-22T00:52:55.792Z [PROTOSERVER] Started on port 19445
2022-07-22T00:52:55.792Z [WEBSERVER] Initialize Webserver
2022-07-22T00:52:55.792Z [WEBSERVER] Initialize Webserver
2022-07-22T00:52:55.792Z [FLATBUFSERVER] Started on port 19400
2022-07-22T00:52:55.792Z [FLATBUFSERVER] Started local domain socket server: 'hyperhdr-domain'
2022-07-22T00:52:55.798Z [WEBSERVER] Apply Webserver settings
2022-07-22T00:52:55.798Z [WEBSERVER] Apply Webserver settings
2022-07-22T00:52:55.798Z [WEBSERVER] Set document root to: :/webconfig
2022-07-22T00:52:55.798Z [WEBSERVER] Set document root to: :/webconfig
2022-07-22T00:52:55.799Z [WEBSERVER] Started on port 8090 name 'HyperHDR Webserver'
2022-07-22T00:52:55.806Z [WEBSERVER] Setup SSL certificate
2022-07-22T00:52:55.806Z [WEBSERVER] Setup private SSL key
2022-07-22T00:52:55.806Z [WEBSERVER] Started on port 8092 name 'HyperHDR Webserver'
2022-07-22T00:52:55.809Z [SMOOTHING0] Using alternative smoothing procedure (0)
2022-07-22T00:52:55.915Z [MUXER0] Priority 245 is now active
2022-07-22T00:52:55.915Z [MUXER0] Set visible priority to 245
2022-07-22T00:52:55.915Z [IMAGETOLED0] Total index number is: 32608 (memory: 32608). User sparse processing is: disabled, image size: 480 x 270, area number: 98
2022-07-22T00:52:55.915Z [IMAGETOLED0] Total index number is: 32608 (memory: 32608). User sparse processing is: disabled, image size: 480 x 270, area number: 98
2022-07-22T00:52:55.915Z [HYPERHDR0] New priority[245], previous [254]
2022-07-22T00:52:55.946Z [DX11_SYSTEM:AUTO] (DxGrabber.cpp:486) AcquireNextFrame didn't return the frame. Just warning: the screen has not changed?
2022-07-22T00:52:56.210Z [DX11_SYSTEM:AUTO] (DxGrabber.cpp:486) AcquireNextFrame didn't return the frame. Just warning: the screen has not changed?
2022-07-22T00:52:56.243Z [DX11_SYSTEM:AUTO] (DxGrabber.cpp:486) AcquireNextFrame didn't return the frame. Just warning: the screen has not changed?
2022-07-22T00:52:56.276Z [DX11_SYSTEM:AUTO] (DxGrabber.cpp:486) AcquireNextFrame didn't return the frame. Just warning: the screen has not changed?
2022-07-22T00:52:56.342Z [DX11_SYSTEM:AUTO] (DxGrabber.cpp:486) AcquireNextFrame didn't return the frame. Just warning: the screen has not changed?
2022-07-22T00:52:59.093Z [WEBSOCKET] (WebSocketClient.cpp:30) New connection from ::1
2022-07-22T00:52:59.093Z [WEBSOCKET] (JsonAPI.cpp:96) Client '::1' switch to HyperHDR instance 0
2022-07-22T00:52:59.146Z [DB] Database opened: C:/Users/PETER/.hyperhdr/db/hyperhdr.db
2022-07-22T00:53:01.163Z [WEBSOCKET] (JsonAPI.cpp:1258) log streaming activated for client ::1
2022-07-22T00:54:00.032Z [PERFORMANCE] [INSTANCE0: FPS = 30.30, processed = 1819]
2022-07-22T00:55:00.026Z [PERFORMANCE] [INSTANCE0: FPS = 30.30, processed = 1818]

[awawa-dev]

Try to disable the background effect/color in the effects tab. And if still doesn't work provide logs again.

[brzozex]

This option was causing the issue. Thanks a lot!!!! Working as intended now.

[awawa-dev]

Glad it's working now. In fact it's a bug related to background effect when is set to color. I will try to fix it and let you know when it's ready.

[awawa-dev]

Hi
The issue should be fixed now. You can download the latest installer from here:
https://github.com/awawa-dev/HyperHDR/actions/runs/2766018465
I would appreciate testing the latest version and re-enabling the background effect.

[brzozex]

HI, its working fine with background mode now.
Is there a way to change priority on background mode??? how do you change priority values on different modes??
I would like to start it with "lamp" mode instead of ambilight.

[awawa-dev]

Great!

The background effect priority cannot be change because any video source with the priority lower than the background effect could not be triggered. You can manually trigger the background effect by disabling other video sources in the hardware/software grabbers control tab (then enabling them if you want ambilight) or by invoking selected effect instead of using the background effect. Such behavior would always require user interaction, but instead of using HyperHDR web page you can use 'json API' playground to create your own command links.