Vehicle ID problem (RLink blocked)

[igno77]

Hi to all,
I need a big help for my RLink 2! The situation is the follow:
I've received from a my friend that live far from me (500km) and work in Renault a completely new RLink2 v8.0 with DAB for replace my RLink2 v3.3 without DAB. For activate the new one he had putted the RLink on another Megane IV, connected with canclip and finally wrote my VIN code in order to be placed on my car. On that Megane it work fine, it's fantastic!! BUT, yesterday I had received the new RLink and when I had putted on my car I receive the message "System Blocked for Antithief function"! It's very weird because inside there is my VIN code (cheked with ddt4all) but, after a lot of research I think that I have find the probem. There is another code called Vehicle ID present in RadNav and it must match with the same number in the UCH ecu. Of course it was the same before with my 3.3 RLink and not now because, the new one, was activated into another vehicle. The solution could be to write my vehicle ID into the new RLink but I can't do it, no way to write. I've tryed also with the new function "manual request" but without success, every time with an error.
Do you have an idea for write this value? I need a software modification or it's impossible?
This is my last way for solve the problem
Thanks a lot for all

[Rcarnero73]

I have the same problem.
the cause: the Rlink has the anti theft active and during the boot, check if the VIN in the BCM is = to the VIN in the RLINK
Someone has commented that it could be unlocked by bridging some connection pins, but not sure and not confirmed.

[marrius30]

any solutions?

[saadousfar]

i can fix this saadousfar59@gmail.com

[StrangerXT]

I wish someone could come up with a solution. I'm planning to purchase a used R-Link with an upgraded hw/sw configuration but I think it is impossible to use it in my car since reprogramming VIN / Vehicle ID is impossible.

[tiktokup]

salut a tous
ou je peux trouver le vehicle ID du vehicule dans DDT4 ???
merci

[tiktokup]

@igno77

Hi
can you tell me where you are now with your vehicle id problem.
is it resolved or not
thank you so much .

[svbfazers]

did you finally solve the problem? I am interested to know since I intend to put a radio from another car in mine

[rttr67]

Problem solved

[SergeyG31]

?

[Rcarnero73]

Problem solved

How did you solve the problem?
regards

[rttr67]

hello everything is done on the table intervention inside with the programmer 2021-03-06, št, 00:05 Rcarnero73 <notifications@github.com> rašė:

…

Problem solved How did you solve the problem? regards — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#259 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ATA377KS4IRUMSGC6Y75DELTCFIRDANCNFSM4IY6LGKQ> .

[Tino1973]

Problema resuelto

Hola, como solucionaste el problema. Cambiaste la ID de la radio?

[rttr67]

i can change radio ID and cancel antiheft 2021-03-23, an, 13:02 Tino1973 ***@***.***> rašė:

…

Problema resuelto Hola, como solucionaste el problema. Cambiaste la ID de la radio? — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#259 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ATA377OSLS7S537IPW554L3TFBYMFANCNFSM4IY6LGKQ> .

[Zerocult1986]

Good how? I have a scrapyard one to exchange for the one from my megane 4 (zerocult@hotmail.es)

[Mario-rox]

Hi, I know this is a bit of an old thread but I have the same problem. I'll leave you my email, could you kindly help me? Obviously paying for your work, I have everything you need. (infobgaelectronic@gmail.com)

[johnkar87]

i can change radio ID and cancel antiheft 2021-03-23, an, 13:02 Tino1973 @.***> rašė:
…
Problema resuelto Hola, como solucionaste el problema. Cambiaste la ID de la radio? — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#259 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/ATA377OSLS7S537IPW554L3TFBYMFANCNFSM4IY6LGKQ .

so could you tell us what di you done exactly and unlock used rlink2 to work with your car?

[Tino1973]

puedo cambiar la identificación de la radio y cancelar el antihurto 2021-03-23, an, 13:02 Tino1973 @.***> rašė:
Como, necesito la informacion. HE gastado 400 euros por uno, que ya no puedo úsalo.
Mi correo es:
kborisov73@gmail.com

[Tino1973]

i can change radio ID and cancel antiheft 2021-03-23, an, 13:02 Tino1973 @.***> rašė:
…
Problema resuelto Hola, como solucionaste el problema. Cambiaste la ID de la radio? — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#259 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/ATA377OSLS7S537IPW554L3TFBYMFANCNFSM4IY6LGKQ .
Por favor, dime la solución. Gracias.

[tareksadeq]

i can change radio ID and cancel antiheft 2021-03-23, an, 13:02 Tino1973 @.***> rašė:
…
Problema resuelto Hola, como solucionaste el problema. Cambiaste la ID de la radio? — You are receiving this because you commented. Reply to this email directly, view it on GitHub <#259 (comment)>, or unsubscribe https://github.com/notifications/unsubscribe-auth/ATA377OSLS7S537IPW554L3TFBYMFANCNFSM4IY6LGKQ .

Can you help me too : tito_sadik@hotmail.com
I need to know how to unlock it

[tontito]

Can you help : punishcrack@hotmail.com
i want to buy used r-link2

[Autodiagcc]

Share picture the your board Envoyé depuis mon téléphone-------- Message original --------De : SergejZi ***@***.***>Date : jeu. 14 mars 2024 à 20:21À : cedricp/ddt4all ***@***.***>Cc : Autodiagcc ***@***.***>, Mention ***@***.***>Objet : Re: [cedricp/ddt4all] Vehicle ID problem (RLink blocked) (Discussion #897) Hello, where exactly on the board is the EEprom 24c256? Thanks in advance —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: ***@***.***>

[SergejZi]

There's more than just one

[Autodiagcc]

This easylink not R-Link Envoyé depuis mon téléphone-------- Message original --------De : SergejZi ***@***.***>Date : jeu. 14 mars 2024 à 22:01À : cedricp/ddt4all ***@***.***>Cc : Autodiagcc ***@***.***>, Mention ***@***.***>Objet : Re: [cedricp/ddt4all] Vehicle ID problem (RLink blocked) (Discussion #897) There's more than just one IMG_20240314_225450.jpg (view on web) —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: ***@***.***>

[AlMeu]

It is R-link for sure.
You can search read on them. There is just one 24c256. ;-)

[SergejZi]

I can't find it, I looked with a magnifying glass. They are all 25 eeproms or with a different number

[Zener-hub]

@SergejZi yes you are correct, on this side of LANR14 you see only the 25 series only for 24 series flip the PCB :).

[Zener-hub]

instead of 24c256 it may be printed as 4256BRP too.

[Torben112]

Hallo I Need help by a locked R-Link 2, can Anyone help me ?

[Torben112]

Hallo, yes I can used it.

[munkun46]

Hallo, yes I can used it.

Write via e-mail, the OBD device you use will be configured.

[Torben112]

i send you a Mail :)

[munkun46]

i send you a Mail :)

Ok

[rttr67]

I can help you with antitheft code if need
zaliavos.ud@gmail.com

[guimartins-cyber]

[AlMeu]

Hallo I Need help by a locked easylink, can Anyone help me ?

There is nothing to do with Easy Link, just replace with another brand new unit.

[munkun46]

Hallo I Need help by a locked easylink, can Anyone help me ?

Hi, If you reach me via e-mail, I will try something. I think there is a solution with an external module.
mehmetunkun@gmail.com

[AndyIreland]

Hallo I Need help by a locked easylink, can Anyone help me ?

a bit of a confliction here - the title / subject is Rlink blocked -yet you say you have a locked easylink.

so have you got a rlink or an easylink - what model is your renault and what year of manufacture? -

[AndyIreland]

ah right yeah that looks like a easylink then - would you maybe be better making another discussion but with easylink blocked in the title?

[saadousfar]

Hello i have the solution to unlock easylink and rlink2 but is not for free

[saadousfar]

Saadousfar59@gmail.com

[JasonSyna]

He is superb , he unlocked my RLink 2 remotely and now anti theft it’s gone and my unit is working perfectly. I recommend him.

[munkun46]

I opened it on the Easylink unit but I need to connect and try it. Elm327 is enough. There is no fee for the connection. Write via e-mail 2 Eyl 2024 Pzt 02:35 tarihinde guimartins-cyber ***@***.***> şunu yazdı:

…

eazylink Enviado do Outlook<http://aka.ms/weboutlook> ________________________________ De: munkun46 ***@***.***> Enviado: domingo, 1 de setembro de 2024 18:15 Para: cedricp/ddt4all ***@***.***> Cc: guimartins-cyber ***@***.***>; Comment ***@***.***> Assunto: Re: [cedricp/ddt4all] Vehicle ID problem (RLink blocked) (Discussion #897) Rlink or easylink? guimartins-cyber ***@***.***>, 1 Eyl 2024 Paz, 21:20 tarihinde şunu yazdı: > how much does it cost? > > I have elm327 and ddt4all scanner > > Will I need an Arduino or just a scanner? > > Or can you do it using an eprom recorder? > > Tell me what you will need and how much it will cost to know if I have the > equipment here. > > > > Enviado do Outlook<http://aka.ms/weboutlook> > > ________________________________ > De: saadousfar ***@***.***> > Enviado: domingo, 1 de setembro de 2024 06:43 > Para: cedricp/ddt4all ***@***.***> > Cc: guimartins-cyber ***@***.***>; Comment ***@***.***> > Assunto: Re: [cedricp/ddt4all] Vehicle ID problem (RLink blocked) > (Discussion #897) > > > Hello i have the solution to unlock easylink and rlink2 but is not for > free > > — > Reply to this email directly, view it on GitHub< > #897 (comment)>, > or unsubscribe< > https://github.com/notifications/unsubscribe-auth/BK5JMKN3LBGTUT7D6QYL3WLZULVTLAVCNFSM6AAAAAA4K6QAQWVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTANJRGE2TKMI>. > > You are receiving this because you commented.Message ID: ***@***.***> > > — > Reply to this email directly, view it on GitHub > < #897 (comment)>, > or unsubscribe > < https://github.com/notifications/unsubscribe-auth/A45OAIY45EQG5XHYN3QLSTTZUNLIXAVCNFSM6AAAAAA4K6QAQWVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTANJRGM4TCMA> > . > You are receiving this because you were mentioned.Message ID: > ***@***.***> > — Reply to this email directly, view it on GitHub< #897 (comment)>, or unsubscribe< https://github.com/notifications/unsubscribe-auth/BK5JMKJAUAIT3PJL24H4M7DZUOGZLAVCNFSM6AAAAAA4K6QAQWVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTANJRGQ3TSOA>. You are receiving this because you commented.Message ID: ***@***.***> — Reply to this email directly, view it on GitHub <#897 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/A45OAIYPDJI7ZYAC4VKTXGLZUOQEXAVCNFSM6AAAAAA4K6QAQWVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTANJRGQ4TQMQ> . You are receiving this because you were mentioned.Message ID: ***@***.***>

[muchecomacdonald]

Did it work?

[Ads74100]

Hello what you Need ?

[ronron78]

Can you help please : m.rondel@hotmail.fr
thanks

[saadousfar]

I can help you but is not for free saadousfar59@gmail.com

[skale12]

[saadousfar]

I can help you but is not for free saadousfar59@gmail.com

[shrlnm]

@skale12 @ronron78
Try the macro below with a pyren3 and unlock it for free

$addr = 13
can500
1003
value 1000 7 4 FFFFFFFF
1101
at sh 69F
at cra 69F
at r0 
:begin
#
# Press q for Exit
#
if_key q end
_$hexValue
wait 0.1
goto begin
:end
exit

[saadousfar]

hi is for sell you can contact me on saadousfar59@gmail.com

[munkun46]

hi is for sell you can contact me on saadousfar59@gmail.com

Will the VIN number be reset or will it just be unlocked? for easylink

[saadousfar]

the vin will still the same but the unit will bee unlocked

[Renotech1]

I send you e mail

hi is for sell you can contact me on saadousfar59@gmail.com

[munkun46]

the vin will still the same but the unit will bee unlocked
I understand that unlocking is easy, but if it doesn't remove the VIN, it's not for me. Thanks.

[MichaelG12344994]

I am looking for some oen to unlock my easylink, anybody?

[Ads74100]

HELLO I CAN FIX IT IF YOU WHANT Le mer. 4 févr. 2026 à 18:51, MichaelG12344994 ***@***.***> a écrit :

…

I am looking for some oen to unlock my easylink, anybody? — Reply to this email directly, view it on GitHub <#897 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BGR7LLVM3MQSBJGX4PRP3T34KIWTPAVCNFSM6AAAAAA4K6QAQWVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTKNRZGYZTGMQ> . You are receiving this because you commented.Message ID: ***@***.***>

[MichaelG12344994]

All sorted, thanks 😊. Can you change vin number?

[Ads74100]

you whant change vin or unlock ? change vin dont unlock Le lun. 9 févr. 2026 à 18:02, MichaelG12344994 ***@***.***> a écrit :

…

All sorted, thanks 😊. Can you change vin number? — Reply to this email directly, view it on GitHub <#897 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BGR7LLTDORV3XGYHX75X76D4LC4PXAVCNFSM6AAAAAA4K6QAQWVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTKNZUGU2DEMA> . You are receiving this because you commented.Message ID: ***@***.***>

[saadousfar]

Hi to all, I need a big help for my RLink 2! The situation is the follow: I've received from a my friend that live far from me (500km) and work in Renault a completely new RLink2 v8.0 with DAB for replace my RLink2 v3.3 without DAB. For activate the new one he had putted the RLink on another Megane IV, connected with canclip and finally wrote my VIN code in order to be placed on my car. On that Megane it work fine, it's fantastic!! BUT, yesterday I had received the new RLink and when I had putted on my car I receive the message "System Blocked for Antithief function"! It's very weird because inside there is my VIN code (cheked with ddt4all) but, after a lot of research I think that I have find the probem. There is another code called Vehicle ID present in RadNav and it must match with the same number in the UCH ecu. Of course it was the same before with my 3.3 RLink and not now because, the new one, was activated into another vehicle. The solution could be to write my vehicle ID into the new RLink but I can't do it, no way to write. I've tryed also with the new function "manual request" but without success, every time with an error. Do you have an idea for write this value? I need a software modification or it's impossible? This is my last way for solve the problem Thanks a lot for all

hi i sell the script te desable the anti theft via canbus no need to dissamble the unit saadousfar59@gmail.com