Is there a way to send a "fake" ps3 ps button with this!

[Yolomic]

heyo so i own a ModeMCU v3 with an esp8266 and id like to just send an hid descriptor some "magic bytes" and the ps button being pressed after a delay
here is what i have so far
magic bytes:
0x21, 0x26, 0x01, 0x07, 0x00, 0x00, 0x00, 0x00
ps button:
Number 13
(P.S. im not sure what is meant here but if anyone knows lemme know)
Possible HID Descriptor :

0x05, 0x01, // Usage Page (Generic Desktop Ctrls)
0x09, 0x04, // Usage (Joystick)
0xA1, 0x01, // Collection (Application)
0x09, 0x01, // Usage (Pointer)
0xA1, 0x00, // Collection (Physical)
0x05, 0x09, // Usage Page (Button)
0x19, 0x01, // Usage Minimum (0x01)
0x29, 0x18, // Usage Maximum (0x18)
0x15, 0x00, // Logical Minimum (0)
0x25, 0x01, // Logical Maximum (1)
0x35, 0x00, // Physical Minimum (0)
0x45, 0x01, // Physical Maximum (1)
0x75, 0x01, // Report Size (1)
0x95, 0x18, // Report Count (24)
0x81, 0x02, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position)
0x05, 0x01, // Usage Page (Generic Desktop Ctrls)
0x09, 0x39, // Usage (Hat switch)
0x15, 0x00, // Logical Minimum (0)
0x25, 0x07, // Logical Maximum (7)
0x35, 0x00, // Physical Minimum (0)
0x46, 0x3B, 0x01, // Physical Maximum (315)
0x65, 0x14, // Unit (System: English Rotation, Length: Centimeter)
0x75, 0x04, // Report Size (4)
0x95, 0x01, // Report Count (1)
0x81, 0x42, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,Null State)
0x75, 0x01, // Report Size (1)
0x95, 0x04, // Report Count (4)
0x81, 0x03, // Input (Const,Var,Abs,No Wrap,Linear,Preferred State,No Null Position)
0x05, 0x01, // Usage Page (Generic Desktop Ctrls)
0x09, 0x30, // Usage (X)
0x09, 0x31, // Usage (Y)
0x09, 0x32, // Usage (Z)
0x09, 0x35, // Usage (Rz)
0x09, 0x36, // Usage (Slider)
0x09, 0x36, // Usage (Slider)
0x09, 0x33, // Usage (Rx)
0x09, 0x34, // Usage (Ry)
0x15, 0x00, // Logical Minimum (0)
0x26, 0xFF, 0x00, // Logical Maximum (255)
0x35, 0x00, // Physical Minimum (0)
0x46, 0xFF, 0x00, // Physical Maximum (255)
0x75, 0x08, // Report Size (8)
0x95, 0x08, // Report Count (8)
0x81, 0x02, // Input (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position)
0x06, 0x00, 0xFF, // Usage Page (Vendor Defined 0xFF00)
0x09, 0x01, // Usage (0x01)
0x75, 0x08, // Report Size (8)
0x95, 0x30, // Report Count (48)
0x91, 0x02, // Output (Data,Var,Abs,No Wrap,Linear,Preferred State,No Null Position,Non-volatile)
0x06, 0x00, 0xFF, // Usage Page (Vendor Defined 0xFF00)
0x09, 0x01, // Usage (0x01)
0x15, 0x00, // Logical Minimum (0)
0x26, 0xFF, 0x00, // Logical Maximum (255)
0x75, 0x08, // Report Size (8)
0x95, 0x31, // Report Count (49)
0xB1, 0x00, // Feature (Data,Array,Abs,No Wrap,Linear,Preferred State,No Null Position,Non-volatile)
0xC0, // End Collection
0xC0, // End Collection

Thanks in Advance!
P.S Please update crosstool-ng

[cnlohr]

I don't know! Sorry. Maybe someone else can chime in - but I have dropped support for this project :-/