Reactive Resume fails during installationΒ #12672
Description
β Have you read and understood the above guidelines?
yes
π Did you run the script with verbose mode enabled?
Yes, verbose mode was enabled and the output is included below
π What is the name of the script you are using?
ReactiveResume
π What was the exact command used to execute the script?
bash -c "$(curl -fsSL https://raw.githubusercontent.com/community-scripts/ProxmoxVE/main/ct/reactive-resume.sh)"
βοΈ What settings are you using?
- Default Settings
- Advanced Settings
π₯οΈ Which Linux distribution are you using?
Debian 13
π Which Proxmox version are you on?
9.1.6
π Provide a clear and concise description of the issue.
Reactive Resume fails during installation
π Steps to reproduce the issue.
Install Reactive Resume from original script and default settings
β Paste the full error output (if available).
================================================================================
COMBINED INSTALLATION LOG - Reactive-Resume
Container ID: 100
Session ID: 774fdc72
Timestamp: 2026-03-08 09:45:54
================================================================================
================================================================================
PHASE 1: CONTAINER CREATION (Host)
================================================================================
================================================================================
[2026-03-08 09:43:52] CONTAINER SETTINGS - Reactive-Resume
================================================================================
[2026-03-08 09:43:52] Application: Reactive-Resume
[2026-03-08 09:43:52] PVE Version: 9.1.6 (Kernel: 6.17.13-1-pve)
[2026-03-08 09:43:52] Container ID: 100
[2026-03-08 09:43:52] Operating System: debian (13)
[2026-03-08 09:43:52] Container Type: Unprivileged
[2026-03-08 09:43:52] Disk Size: 8 GB
[2026-03-08 09:43:52] CPU Cores: 2
[2026-03-08 09:43:52] RAM Size: 4096 MiB
[2026-03-08 09:43:52] Session ID: 774fdc72
[2026-03-08 09:43:57] [OK] Storage qnas (Free: 2.8TB Used: 3.2TB) [Template]
[2026-03-08 09:44:03] [OK] Storage nvme-2-tb-a (Free: 546.1GB Used: 1.3TB) [Container]
[2026-03-08 09:44:03] [INFO] Validating storage 'nvme-2-tb-a'
[2026-03-08 09:44:04] [OK] Storage 'nvme-2-tb-a' (lvm) validated
[2026-03-08 09:44:04] [INFO] Validating template storage 'qnas'
[2026-03-08 09:44:05] [OK] Template storage 'qnas' validated
[2026-03-08 09:44:05] [INFO] Searching for template 'debian-13'
[2026-03-08 09:44:06] [OK] Template search completed
[2026-03-08 09:44:07] [OK] Template debian-13-standard_13.1-2_amd64.tar.zst [local]
βοΈ Template debian-13-standard_13.1-2_amd64.tar.zst is present and valid.
[2026-03-08 09:44:08] [OK] Template debian-13-standard_13.1-2_amd64.tar.zst is present and valid.
[2026-03-08 09:44:09] [INFO] Creating LXC container
[2026-03-08 09:44:17] [OK] LXC Container 100 was successfully created.
--- pct create output ---
Wiping ext4 signature on /dev/wd-red-nvme-2tb/vm-100-disk-0.
Logical volume "vm-100-disk-0" created.
Creating filesystem with 2097152 4k blocks and 524288 inodes
Filesystem UUID: 7e0746a7-dac3-487d-9a6c-a5f8f7e34ca5
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
extracting archive '/mnt/pve/qnas/template/cache/debian-13-standard_13.1-2_amd64.tar.zst'
Total bytes read: 551505920 (526MiB, 333MiB/s)
Detected container architecture: amd64
Creating SSH host key 'ssh_host_rsa_key' - this may take some time ...
done: SHA256:RcwiC0yp0VvjDnlH0iHSuHr5slbsgGAxw2WliqfgOQ4 root@reactive-resume
Creating SSH host key 'ssh_host_ecdsa_key' - this may take some time ...
done: SHA256:vkRnymD7eL1e1S0tDsUd/rS5l3iwuqNWNVAwywRZXb0 root@reactive-resume
Creating SSH host key 'ssh_host_ed25519_key' - this may take some time ...
done: SHA256:y4r9ALfJDiPXrnTJrpJ1OFnVUCnqbr9XnsmduTKAU10 root@reactive-resume
--- end pct create output ---
[2026-03-08 09:44:17] [INFO] Starting LXC Container
[2026-03-08 09:44:21] [OK] Started LXC Container
[2026-03-08 09:44:21] [INFO] Waiting for network in LXC container
[2026-03-08 09:44:23] [OK] Network in LXC is reachable (ping)
[2026-03-08 09:44:23] [INFO] Customizing LXC Container
Get:1 http://deb.debian.org/debian trixie InRelease [140 kB]
Get:2 http://security.debian.org trixie-security InRelease [43.4 kB]
Get:3 http://security.debian.org trixie-security/main amd64 Packages [108 kB]
Get:4 http://deb.debian.org/debian trixie-updates InRelease [47.3 kB]
Get:5 http://deb.debian.org/debian trixie/contrib amd64 Packages [53.8 kB]
Get:6 http://security.debian.org trixie-security/main Translation-en [70.0 kB]
Get:7 http://deb.debian.org/debian trixie/contrib Translation-en [49.6 kB]
Get:8 http://deb.debian.org/debian trixie/main amd64 Packages [9,670 kB]
Get:9 http://deb.debian.org/debian trixie/main Translation-en [6,484 kB]
Get:10 http://deb.debian.org/debian trixie-updates/main Translation-en [4,096 B]
Fetched 16.7 MB in 2s (9,692 kB/s)
Reading package lists...
Reading package lists...
Building dependency tree...
The following additional packages will be installed:
dirmngr gnupg gnupg-l10n gnupg-utils gpg gpg-agent gpg-wks-client gpgconf
gpgsm gpgv libassuan9 libatomic1 libbrotli1 libcurl4t64 libgcrypt20
libglib2.0-0t64 libglib2.0-data libgpg-error-l10n libgpg-error0 libgpm2
libjq1 libksba8 libldap-common libldap2 libnghttp3-9 libnpth0t64 libonig5
librtmp1 libssh2-1t64 mailcap mc-data pinentry-curses shared-mime-info unzip
xdg-user-dirs
Suggested packages:
dbus-user-session pinentry-gnome3 tor gpg-wks-server parcimonie xloadimage
scdaemon tpm2daemon rng-tools low-memory-monitor gpm antiword arc | arcanist
arj binutils cabextract catdoc texlive-binaries clzip | lunzip | lzd | lzip
| lziprecover | minilzip | pdlzip | plzip ctorrent dbview
default-jdk-headless djview4 djvulibre-bin elinks epub-utils
| ncbi-entrez-direct exif genisoimage gettext ghostscript glade gputils gv
imagemagick info jlha-utils | lhasa kchmviewer libaspell-dev libbatik-java
libchm-bin liblz4-tool libxml2-utils links2 links | w3m | lynx lyx mikmod
mpg321 mplayer odt2txt | unoconv p7zip-full par2 poedit | potool
poppler-utils procyon-decompiler python3-boto python3-tz rar rpm sox sqlite3
timidity unace | unace-nonfree unalz unar unrar | unrar-free vorbis-tools
wimtools wv xpdf | pdf-viewer xpmutils zip zstd pinentry-doc
The following NEW packages will be installed:
curl dirmngr gnupg gnupg-l10n gnupg-utils gnupg2 gpg gpg-agent
gpg-wks-client gpgconf gpgsm gpgv jq libassuan9 libatomic1 libbrotli1
libcurl4t64 libgcrypt20 libglib2.0-0t64 libglib2.0-data libgpg-error-l10n
libgpg-error0 libgpm2 libjq1 libksba8 libldap-common libldap2 libnghttp3-9
libnpth0t64 libonig5 librtmp1 libssh2-1t64 mailcap mc mc-data
pinentry-curses shared-mime-info sudo unzip xdg-user-dirs
0 upgraded, 40 newly installed, 0 to remove and 39 not upgraded.
Need to get 14.6 MB of archives.
After this operation, 56.4 MB of additional disk space will be used.
Get:1 http://deb.debian.org/debian trixie/main amd64 sudo amd64 1.9.16p2-3 [2,087 kB]
Get:2 http://deb.debian.org/debian trixie/main amd64 libbrotli1 amd64 1.1.0-2+b7 [307 kB]
Get:3 http://deb.debian.org/debian trixie/main amd64 libldap2 amd64 2.6.10+dfsg-1 [194 kB]
Get:4 http://deb.debian.org/debian trixie/main amd64 libnghttp3-9 amd64 1.8.0-1 [67.7 kB]
Get:5 http://deb.debian.org/debian trixie/main amd64 librtmp1 amd64 2.4+20151223.gitfa8646d.1-2+b5 [58.8 kB]
Get:6 http://deb.debian.org/debian trixie/main amd64 libssh2-1t64 amd64 1.11.1-1 [245 kB]
Get:7 http://deb.debian.org/debian trixie/main amd64 libcurl4t64 amd64 8.14.1-2+deb13u2 [391 kB]
Get:8 http://deb.debian.org/debian trixie/main amd64 curl amd64 8.14.1-2+deb13u2 [270 kB]
Get:9 http://deb.debian.org/debian trixie/main amd64 libgpg-error0 amd64 1.51-4 [82.1 kB]
Get:10 http://deb.debian.org/debian trixie/main amd64 libassuan9 amd64 3.0.2-2 [61.5 kB]
Get:11 http://deb.debian.org/debian trixie/main amd64 libgcrypt20 amd64 1.11.0-7 [843 kB]
Get:12 http://deb.debian.org/debian trixie/main amd64 gpgconf amd64 2.4.7-21+deb13u1+b1 [129 kB]
Get:13 http://deb.debian.org/debian trixie/main amd64 libksba8 amd64 1.6.7-2+b1 [136 kB]
Get:14 http://deb.debian.org/debian trixie/main amd64 libnpth0t64 amd64 1.8-3 [23.2 kB]
Get:15 http://deb.debian.org/debian trixie/main amd64 dirmngr amd64 2.4.7-21+deb13u1+b1 [384 kB]
Get:16 http://deb.debian.org/debian trixie/main amd64 gnupg-l10n all 2.4.7-21+deb13u1 [749 kB]
Get:17 http://deb.debian.org/debian trixie/main amd64 gpg amd64 2.4.7-21+deb13u1+b1 [634 kB]
Get:18 http://deb.debian.org/debian trixie/main amd64 pinentry-curses amd64 1.3.1-2 [86.4 kB]
Get:19 http://deb.debian.org/debian trixie/main amd64 gpg-agent amd64 2.4.7-21+deb13u1+b1 [271 kB]
Get:20 http://deb.debian.org/debian trixie/main amd64 gpgsm amd64 2.4.7-21+deb13u1+b1 [275 kB]
Get:21 http://deb.debian.org/debian trixie/main amd64 gnupg all 2.4.7-21+deb13u1 [417 kB]
Get:22 http://deb.debian.org/debian trixie/main amd64 gnupg2 all 2.4.7-21+deb13u1 [16.3 kB]
Get:23 http://deb.debian.org/debian trixie/main amd64 gpg-wks-client amd64 2.4.7-21+deb13u1+b1 [109 kB]
Get:24 http://deb.debian.org/debian trixie/main amd64 gpgv amd64 2.4.7-21+deb13u1+b1 [241 kB]
Get:25 http://deb.debian.org/debian trixie/main amd64 libonig5 amd64 6.9.9-1+b1 [189 kB]
Get:26 http://deb.debian.org/debian trixie/main amd64 libjq1 amd64 1.7.1-6+deb13u1 [164 kB]
Get:27 http://deb.debian.org/debian trixie/main amd64 jq amd64 1.7.1-6+deb13u1 [77.7 kB]
Get:28 http://deb.debian.org/debian trixie/main amd64 libatomic1 amd64 14.2.0-19 [9,308 B]
Get:29 http://deb.debian.org/debian trixie/main amd64 libglib2.0-0t64 amd64 2.84.4-3~deb13u2 [1,518 kB]
Get:30 http://deb.debian.org/debian trixie/main amd64 libglib2.0-data all 2.84.4-3~deb13u2 [1,286 kB]
Get:31 http://deb.debian.org/debian trixie/main amd64 libgpg-error-l10n all 1.51-4 [114 kB]
Get:32 http://deb.debian.org/debian trixie/main amd64 libgpm2 amd64 1.20.7-11+b2 [14.4 kB]
Get:33 http://deb.debian.org/debian trixie/main amd64 libldap-common all 2.6.10+dfsg-1 [35.1 kB]
Get:34 http://deb.debian.org/debian trixie/main amd64 mailcap all 3.74 [32.8 kB]
Get:35 http://deb.debian.org/debian trixie/main amd64 mc-data all 3:4.8.33-1+deb13u1 [1,341 kB]
Get:36 http://deb.debian.org/debian trixie/main amd64 mc amd64 3:4.8.33-1+deb13u1 [550 kB]
Get:37 http://deb.debian.org/debian trixie/main amd64 shared-mime-info amd64 2.4-5+b2 [760 kB]
Get:38 http://deb.debian.org/debian trixie/main amd64 unzip amd64 6.0-29 [173 kB]
Get:39 http://deb.debian.org/debian trixie/main amd64 xdg-user-dirs amd64 0.18-2 [53.2 kB]
Get:40 http://deb.debian.org/debian trixie/main amd64 gnupg-utils amd64 2.4.7-21+deb13u1+b1 [195 kB]
Fetched 14.6 MB in 2s (6,862 kB/s)
Selecting previously unselected package sudo.
(Reading database ... 18923 files and directories currently installed.)
Preparing to unpack .../00-sudo_1.9.16p2-3_amd64.deb ...
Unpacking sudo (1.9.16p2-3) ...
Selecting previously unselected package libbrotli1:amd64.
Preparing to unpack .../01-libbrotli1_1.1.0-2+b7_amd64.deb ...
Unpacking libbrotli1:amd64 (1.1.0-2+b7) ...
Selecting previously unselected package libldap2:amd64.
Preparing to unpack .../02-libldap2_2.6.10+dfsg-1_amd64.deb ...
Unpacking libldap2:amd64 (2.6.10+dfsg-1) ...
Selecting previously unselected package libnghttp3-9:amd64.
Preparing to unpack .../03-libnghttp3-9_1.8.0-1_amd64.deb ...
Unpacking libnghttp3-9:amd64 (1.8.0-1) ...
Selecting previously unselected package librtmp1:amd64.
Preparing to unpack .../04-librtmp1_2.4+20151223.gitfa8646d.1-2+b5_amd64.deb ...
Unpacking librtmp1:amd64 (2.4+20151223.gitfa8646d.1-2+b5) ...
Selecting previously unselected package libssh2-1t64:amd64.
Preparing to unpack .../05-libssh2-1t64_1.11.1-1_amd64.deb ...
Unpacking libssh2-1t64:amd64 (1.11.1-1) ...
Selecting previously unselected package libcurl4t64:amd64.
Preparing to unpack .../06-libcurl4t64_8.14.1-2+deb13u2_amd64.deb ...
Unpacking libcurl4t64:amd64 (8.14.1-2+deb13u2) ...
Selecting previously unselected package curl.
Preparing to unpack .../07-curl_8.14.1-2+deb13u2_amd64.deb ...
Unpacking curl (8.14.1-2+deb13u2) ...
Selecting previously unselected package libgpg-error0:amd64.
Preparing to unpack .../08-libgpg-error0_1.51-4_amd64.deb ...
Unpacking libgpg-error0:amd64 (1.51-4) ...
Selecting previously unselected package libassuan9:amd64.
Preparing to unpack .../09-libassuan9_3.0.2-2_amd64.deb ...
Unpacking libassuan9:amd64 (3.0.2-2) ...
Selecting previously unselected package libgcrypt20:amd64.
Preparing to unpack .../10-libgcrypt20_1.11.0-7_amd64.deb ...
Unpacking libgcrypt20:amd64 (1.11.0-7) ...
Selecting previously unselected package gpgconf.
Preparing to unpack .../11-gpgconf_2.4.7-21+deb13u1+b1_amd64.deb ...
Unpacking gpgconf (2.4.7-21+deb13u1+b1) ...
Selecting previously unselected package libksba8:amd64.
Preparing to unpack .../12-libksba8_1.6.7-2+b1_amd64.deb ...
Unpacking libksba8:amd64 (1.6.7-2+b1) ...
Selecting previously unselected package libnpth0t64:amd64.
Preparing to unpack .../13-libnpth0t64_1.8-3_amd64.deb ...
Unpacking libnpth0t64:amd64 (1.8-3) ...
Selecting previously unselected package dirmngr.
Preparing to unpack .../14-dirmngr_2.4.7-21+deb13u1+b1_amd64.deb ...
Unpacking dirmngr (2.4.7-21+deb13u1+b1) ...
Selecting previously unselected package gnupg-l10n.
Preparing to unpack .../15-gnupg-l10n_2.4.7-21+deb13u1_all.deb ...
Unpacking gnupg-l10n (2.4.7-21+deb13u1) ...
Selecting previously unselected package gpg.
Preparing to unpack .../16-gpg_2.4.7-21+deb13u1+b1_amd64.deb ...
Unpacking gpg (2.4.7-21+deb13u1+b1) ...
Selecting previously unselected package pinentry-curses.
Preparing to unpack .../17-pinentry-curses_1.3.1-2_amd64.deb ...
Unpacking pinentry-curses (1.3.1-2) ...
Selecting previously unselected package gpg-agent.
Preparing to unpack .../18-gpg-agent_2.4.7-21+deb13u1+b1_amd64.deb ...
Unpacking gpg-agent (2.4.7-21+deb13u1+b1) ...
Selecting previously unselected package gpgsm.
Preparing to unpack .../19-gpgsm_2.4.7-21+deb13u1+b1_amd64.deb ...
Unpacking gpgsm (2.4.7-21+deb13u1+b1) ...
Selecting previously unselected package gnupg.
Preparing to unpack .../20-gnupg_2.4.7-21+deb13u1_all.deb ...
Unpacking gnupg (2.4.7-21+deb13u1) ...
Selecting previously unselected package gnupg2.
Preparing to unpack .../21-gnupg2_2.4.7-21+deb13u1_all.deb ...
Unpacking gnupg2 (2.4.7-21+deb13u1) ...
Selecting previously unselected package gpg-wks-client.
Preparing to unpack .../22-gpg-wks-client_2.4.7-21+deb13u1+b1_amd64.deb ...
Unpacking gpg-wks-client (2.4.7-21+deb13u1+b1) ...
Selecting previously unselected package gpgv.
Preparing to unpack .../23-gpgv_2.4.7-21+deb13u1+b1_amd64.deb ...
Unpacking gpgv (2.4.7-21+deb13u1+b1) ...
Selecting previously unselected package libonig5:amd64.
Preparing to unpack .../24-libonig5_6.9.9-1+b1_amd64.deb ...
Unpacking libonig5:amd64 (6.9.9-1+b1) ...
Selecting previously unselected package libjq1:amd64.
Preparing to unpack .../25-libjq1_1.7.1-6+deb13u1_amd64.deb ...
Unpacking libjq1:amd64 (1.7.1-6+deb13u1) ...
Selecting previously unselected package jq.
Preparing to unpack .../26-jq_1.7.1-6+deb13u1_amd64.deb ...
Unpacking jq (1.7.1-6+deb13u1) ...
Selecting previously unselected package libatomic1:amd64.
Preparing to unpack .../27-libatomic1_14.2.0-19_amd64.deb ...
Unpacking libatomic1:amd64 (14.2.0-19) ...
Selecting previously unselected package libglib2.0-0t64:amd64.
Preparing to unpack .../28-libglib2.0-0t64_2.84.4-3~deb13u2_amd64.deb ...
Unpacking libglib2.0-0t64:amd64 (2.84.4-3~deb13u2) ...
Selecting previously unselected package libglib2.0-data.
Preparing to unpack .../29-libglib2.0-data_2.84.4-3~deb13u2_all.deb ...
Unpacking libglib2.0-data (2.84.4-3~deb13u2) ...
Selecting previously unselected package libgpg-error-l10n.
Preparing to unpack .../30-libgpg-error-l10n_1.51-4_all.deb ...
Unpacking libgpg-error-l10n (1.51-4) ...
Selecting previously unselected package libgpm2:amd64.
Preparing to unpack .../31-libgpm2_1.20.7-11+b2_amd64.deb ...
Unpacking libgpm2:amd64 (1.20.7-11+b2) ...
Selecting previously unselected package libldap-common.
Preparing to unpack .../32-libldap-common_2.6.10+dfsg-1_all.deb ...
Unpacking libldap-common (2.6.10+dfsg-1) ...
Selecting previously unselected package mailcap.
Preparing to unpack .../33-mailcap_3.74_all.deb ...
Unpacking mailcap (3.74) ...
Selecting previously unselected package mc-data.
Preparing to unpack .../34-mc-data_3%3a4.8.33-1+deb13u1_all.deb ...
Unpacking mc-data (3:4.8.33-1+deb13u1) ...
Selecting previously unselected package mc.
Preparing to unpack .../35-mc_3%3a4.8.33-1+deb13u1_amd64.deb ...
Unpacking mc (3:4.8.33-1+deb13u1) ...
Selecting previously unselected package shared-mime-info.
Preparing to unpack .../36-shared-mime-info_2.4-5+b2_amd64.deb ...
Unpacking shared-mime-info (2.4-5+b2) ...
Selecting previously unselected package unzip.
Preparing to unpack .../37-unzip_6.0-29_amd64.deb ...
Unpacking unzip (6.0-29) ...
Selecting previously unselected package xdg-user-dirs.
Preparing to unpack .../38-xdg-user-dirs_0.18-2_amd64.deb ...
Unpacking xdg-user-dirs (0.18-2) ...
Selecting previously unselected package gnupg-utils.
Preparing to unpack .../39-gnupg-utils_2.4.7-21+deb13u1+b1_amd64.deb ...
Unpacking gnupg-utils (2.4.7-21+deb13u1+b1) ...
Setting up libnpth0t64:amd64 (1.8-3) ...
Setting up libgpm2:amd64 (1.20.7-11+b2) ...
Setting up libgpg-error0:amd64 (1.51-4) ...
Setting up xdg-user-dirs (0.18-2) ...
Setting up unzip (6.0-29) ...
Setting up libbrotli1:amd64 (1.1.0-2+b7) ...
Setting up libgcrypt20:amd64 (1.11.0-7) ...
Setting up libldap-common (2.6.10+dfsg-1) ...
Setting up libglib2.0-data (2.84.4-3~deb13u2) ...
Setting up gnupg-l10n (2.4.7-21+deb13u1) ...
Setting up librtmp1:amd64 (2.4+20151223.gitfa8646d.1-2+b5) ...
Setting up libatomic1:amd64 (14.2.0-19) ...
Setting up sudo (1.9.16p2-3) ...
Setting up mc-data (3:4.8.33-1+deb13u1) ...
Setting up libnghttp3-9:amd64 (1.8.0-1) ...
Setting up gpgv (2.4.7-21+deb13u1+b1) ...
Setting up libassuan9:amd64 (3.0.2-2) ...
Setting up gpgconf (2.4.7-21+deb13u1+b1) ...
Setting up libssh2-1t64:amd64 (1.11.1-1) ...
Setting up libgpg-error-l10n (1.51-4) ...
Setting up mailcap (3.74) ...
Setting up libldap2:amd64 (2.6.10+dfsg-1) ...
Setting up libonig5:amd64 (6.9.9-1+b1) ...
Setting up libksba8:amd64 (1.6.7-2+b1) ...
Setting up pinentry-curses (1.3.1-2) ...
Setting up gpg-agent (2.4.7-21+deb13u1+b1) ...
Created symlink '/etc/systemd/user/sockets.target.wants/gpg-agent-browser.socket' β '/usr/lib/systemd/user/gpg-agent-browser.socket'.
Created symlink '/etc/systemd/user/sockets.target.wants/gpg-agent-extra.socket' β '/usr/lib/systemd/user/gpg-agent-extra.socket'.
Created symlink '/etc/systemd/user/sockets.target.wants/gpg-agent-ssh.socket' β '/usr/lib/systemd/user/gpg-agent-ssh.socket'.
Created symlink '/etc/systemd/user/sockets.target.wants/gpg-agent.socket' β '/usr/lib/systemd/user/gpg-agent.socket'.
Setting up libcurl4t64:amd64 (8.14.1-2+deb13u2) ...
Setting up libjq1:amd64 (1.7.1-6+deb13u1) ...
Setting up gpgsm (2.4.7-21+deb13u1+b1) ...
Setting up dirmngr (2.4.7-21+deb13u1+b1) ...
Created symlink '/etc/systemd/user/sockets.target.wants/dirmngr.socket' β '/usr/lib/systemd/user/dirmngr.socket'.
Setting up libglib2.0-0t64:amd64 (2.84.4-3~deb13u2) ...
No schema files found: doing nothing.
Setting up shared-mime-info (2.4-5+b2) ...
Setting up jq (1.7.1-6+deb13u1) ...
Setting up curl (8.14.1-2+deb13u2) ...
Setting up gpg (2.4.7-21+deb13u1+b1) ...
Created symlink '/etc/systemd/user/sockets.target.wants/keyboxd.socket' β '/usr/lib/systemd/user/keyboxd.socket'.
Setting up gnupg-utils (2.4.7-21+deb13u1+b1) ...
Setting up mc (3:4.8.33-1+deb13u1) ...
update-alternatives: using /usr/bin/mcview to provide /usr/bin/view (view) in auto mode
Setting up gpg-wks-client (2.4.7-21+deb13u1+b1) ...
Setting up gnupg (2.4.7-21+deb13u1) ...
Setting up gnupg2 (2.4.7-21+deb13u1) ...
Processing triggers for man-db (2.13.1-1) ...
Processing triggers for libc-bin (2.41-12) ...
[2026-03-08 09:44:41] [OK] Customized LXC Container
[2026-03-08 09:45:54] [ERROR] Installation failed in container 100 (exit code: 1)
================================================================================
PHASE 2: APPLICATION INSTALLATION (Container)
================================================================================
[2026-03-08 09:44:42] [INFO] Setting up Container OS
[2026-03-08 09:44:42] [OK] Set up Container OS
[2026-03-08 09:44:42] [OK] Network Connected: 10.0.20.44
[2026-03-08 09:44:43] [OK] IPv4 Internet Connected
[2026-03-08 09:44:43] [ERROR] IPv6 Internet Not Connected
[2026-03-08 09:44:44] [OK] Git DNS: github.com:(βοΈ ) raw.githubusercontent.com:(βοΈ ) api.github.com:(βοΈ ) git.community-scripts.org:(βοΈ )
[2026-03-08 09:44:44] [INFO] Updating Container OS
Hit:1 http://security.debian.org trixie-security InRelease
Hit:2 http://deb.debian.org/debian trixie InRelease
Hit:3 http://deb.debian.org/debian trixie-updates InRelease
Reading package lists...
Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
The following packages will be upgraded:
base-files bash bind9-dnsutils bind9-host bind9-libs dhcpcd-base
distro-info-data e2fsprogs inetutils-telnet libc-bin libc-l10n libc6 libcap2
libcap2-bin libcom-err2 libext2fs2t64 libgnutls30t64 libnss-systemd
libpam-systemd libpam-wtmpdb libss2 libssl3t64 libsystemd-shared libsystemd0
libudev1 libwtmpdb0 libxml2 locales logsave openssl openssl-provider-legacy
postfix python3-urllib3 sqv systemd systemd-sysv systemd-timesyncd udev
wtmpdb
39 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Need to get 29.2 MB of archives.
After this operation, 65.5 kB of additional disk space will be used.
Get:1 http://deb.debian.org/debian trixie/main amd64 libc6 amd64 2.41-12+deb13u1 [2,851 kB]
Get:2 http://security.debian.org trixie-security/main amd64 openssl-provider-legacy amd64 3.5.4-1~deb13u2 [308 kB]
Get:3 http://security.debian.org trixie-security/main amd64 libssl3t64 amd64 3.5.4-1~deb13u2 [2,442 kB]
Get:4 http://security.debian.org trixie-security/main amd64 bind9-dnsutils amd64 1:9.20.18-1~deb13u1 [166 kB]
Get:5 http://security.debian.org trixie-security/main amd64 bind9-host amd64 1:9.20.18-1~deb13u1 [55.5 kB]
Get:6 http://security.debian.org trixie-security/main amd64 bind9-libs amd64 1:9.20.18-1~deb13u1 [1,240 kB]
Get:7 http://deb.debian.org/debian trixie/main amd64 base-files amd64 13.8+deb13u3 [73.3 kB]
Get:8 http://deb.debian.org/debian trixie/main amd64 bash amd64 5.2.37-2+b7 [1,501 kB]
Get:9 http://security.debian.org trixie-security/main amd64 inetutils-telnet amd64 2:2.6-3+deb13u2 [131 kB]
Get:10 http://security.debian.org trixie-security/main amd64 libgnutls30t64 amd64 3.8.9-3+deb13u2 [1,468 kB]
Get:11 http://deb.debian.org/debian trixie/main amd64 libc-bin amd64 2.41-12+deb13u1 [637 kB]
Get:12 http://deb.debian.org/debian trixie/main amd64 logsave amd64 1.47.2-3+b7 [24.9 kB]
Get:13 http://deb.debian.org/debian trixie/main amd64 libext2fs2t64 amd64 1.47.2-3+b7 [213 kB]
Get:14 http://deb.debian.org/debian trixie/main amd64 e2fsprogs amd64 1.47.2-3+b7 [591 kB]
Get:15 http://security.debian.org trixie-security/main amd64 openssl amd64 3.5.4-1~deb13u2 [1,495 kB]
Get:16 http://deb.debian.org/debian trixie/main amd64 libcap2 amd64 1:2.75-10+b3 [28.8 kB]
Get:17 http://deb.debian.org/debian trixie/main amd64 libsystemd0 amd64 257.9-1~deb13u1 [453 kB]
Get:18 http://deb.debian.org/debian trixie/main amd64 libnss-systemd amd64 257.9-1~deb13u1 [218 kB]
Get:19 http://deb.debian.org/debian trixie/main amd64 systemd-sysv amd64 257.9-1~deb13u1 [64.5 kB]
Get:20 http://deb.debian.org/debian trixie/main amd64 libpam-systemd amd64 257.9-1~deb13u1 [297 kB]
Get:21 http://deb.debian.org/debian trixie/main amd64 libsystemd-shared amd64 257.9-1~deb13u1 [2,151 kB]
Get:22 http://security.debian.org trixie-security/main amd64 python3-urllib3 all 2.3.0-3+deb13u1 [115 kB]
Get:23 http://deb.debian.org/debian trixie/main amd64 systemd amd64 257.9-1~deb13u1 [3,096 kB]
Get:24 http://deb.debian.org/debian trixie/main amd64 systemd-timesyncd amd64 257.9-1~deb13u1 [93.0 kB]
Get:25 http://deb.debian.org/debian trixie/main amd64 udev amd64 257.9-1~deb13u1 [1,392 kB]
Get:26 http://deb.debian.org/debian trixie/main amd64 libudev1 amd64 257.9-1~deb13u1 [152 kB]
Get:27 http://deb.debian.org/debian trixie/main amd64 postfix amd64 3.10.5-1~deb13u1 [1,600 kB]
Get:28 http://deb.debian.org/debian trixie/main amd64 sqv amd64 1.3.0-3+b2 [661 kB]
Get:29 http://deb.debian.org/debian trixie/main amd64 dhcpcd-base amd64 1:10.1.0-11+deb13u2 [201 kB]
Get:30 http://deb.debian.org/debian trixie/main amd64 libxml2 amd64 2.12.7+dfsg+really2.9.14-2.1+deb13u2 [698 kB]
Get:31 http://deb.debian.org/debian trixie/main amd64 libcom-err2 amd64 1.47.2-3+b7 [25.0 kB]
Get:32 http://deb.debian.org/debian trixie/main amd64 libc-l10n all 2.41-12+deb13u1 [738 kB]
Get:33 http://deb.debian.org/debian trixie/main amd64 wtmpdb amd64 0.73.0-3+deb13u1 [21.8 kB]
Get:34 http://deb.debian.org/debian trixie/main amd64 libpam-wtmpdb amd64 0.73.0-3+deb13u1 [10.8 kB]
Get:35 http://deb.debian.org/debian trixie/main amd64 libwtmpdb0 amd64 0.73.0-3+deb13u1 [13.1 kB]
Get:36 http://deb.debian.org/debian trixie/main amd64 locales all 2.41-12+deb13u1 [3,925 kB]
Get:37 http://deb.debian.org/debian trixie/main amd64 distro-info-data all 0.66+deb13u1 [6,724 B]
Get:38 http://deb.debian.org/debian trixie/main amd64 libcap2-bin amd64 1:2.75-10+b3 [36.4 kB]
Get:39 http://deb.debian.org/debian trixie/main amd64 libss2 amd64 1.47.2-3+b7 [29.7 kB]
apt-listchanges: Reading changelogs...
Preconfiguring packages ...
Fetched 29.2 MB in 3s (11.5 MB/s)
(Reading database ... 20272 files and directories currently installed.)
Preparing to unpack .../libc6_2.41-12+deb13u1_amd64.deb ...
Unpacking libc6:amd64 (2.41-12+deb13u1) over (2.41-12) ...
Setting up libc6:amd64 (2.41-12+deb13u1) ...
(Reading database ... 20272 files and directories currently installed.)
Preparing to unpack .../base-files_13.8+deb13u3_amd64.deb ...
Unpacking base-files (13.8+deb13u3) over (13.8+deb13u1) ...
Setting up base-files (13.8+deb13u3) ...
Installing new version of config file /etc/debian_version ...
(Reading database ... 20272 files and directories currently installed.)
Preparing to unpack .../bash_5.2.37-2+b7_amd64.deb ...
Unpacking bash (5.2.37-2+b7) over (5.2.37-2+b5) ...
Setting up bash (5.2.37-2+b7) ...
update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode
(Reading database ... 20272 files and directories currently installed.)
Preparing to unpack .../libc-bin_2.41-12+deb13u1_amd64.deb ...
Unpacking libc-bin (2.41-12+deb13u1) over (2.41-12) ...
Setting up libc-bin (2.41-12+deb13u1) ...
(Reading database ... 20272 files and directories currently installed.)
Preparing to unpack .../logsave_1.47.2-3+b7_amd64.deb ...
Unpacking logsave (1.47.2-3+b7) over (1.47.2-3+b3) ...
Preparing to unpack .../libext2fs2t64_1.47.2-3+b7_amd64.deb ...
Leaving 'diversion of /lib/x86_64-linux-gnu/libe2p.so.2 to /lib/x86_64-linux-gnu/libe2p.so.2.usr-is-merged by libext2fs2t64'
Leaving 'diversion of /lib/x86_64-linux-gnu/libe2p.so.2.3 to /lib/x86_64-linux-gnu/libe2p.so.2.3.usr-is-merged by libext2fs2t64'
Leaving 'diversion of /lib/x86_64-linux-gnu/libext2fs.so.2 to /lib/x86_64-linux-gnu/libext2fs.so.2.usr-is-merged by libext2fs2t64'
Leaving 'diversion of /lib/x86_64-linux-gnu/libext2fs.so.2.4 to /lib/x86_64-linux-gnu/libext2fs.so.2.4.usr-is-merged by libext2fs2t64'
Unpacking libext2fs2t64:amd64 (1.47.2-3+b7) over (1.47.2-3+b3) ...
Setting up libext2fs2t64:amd64 (1.47.2-3+b7) ...
(Reading database ... 20272 files and directories currently installed.)
Preparing to unpack .../e2fsprogs_1.47.2-3+b7_amd64.deb ...
Unpacking e2fsprogs (1.47.2-3+b7) over (1.47.2-3+b3) ...
Preparing to unpack .../libcap2_1%3a2.75-10+b3_amd64.deb ...
Unpacking libcap2:amd64 (1:2.75-10+b3) over (1:2.75-10+b1) ...
Setting up libcap2:amd64 (1:2.75-10+b3) ...
(Reading database ... 20272 files and directories currently installed.)
Preparing to unpack .../libsystemd0_257.9-1~deb13u1_amd64.deb ...
Unpacking libsystemd0:amd64 (257.9-1~deb13u1) over (257.8-1~deb13u2) ...
Setting up libsystemd0:amd64 (257.9-1~deb13u1) ...
(Reading database ... 20272 files and directories currently installed.)
Preparing to unpack .../libnss-systemd_257.9-1~deb13u1_amd64.deb ...
Unpacking libnss-systemd:amd64 (257.9-1~deb13u1) over (257.8-1~deb13u2) ...
Preparing to unpack .../systemd-sysv_257.9-1~deb13u1_amd64.deb ...
Unpacking systemd-sysv (257.9-1~deb13u1) over (257.8-1~deb13u2) ...
Preparing to unpack .../libpam-systemd_257.9-1~deb13u1_amd64.deb ...
Unpacking libpam-systemd:amd64 (257.9-1~deb13u1) over (257.8-1~deb13u2) ...
Preparing to unpack .../libsystemd-shared_257.9-1~deb13u1_amd64.deb ...
Unpacking libsystemd-shared:amd64 (257.9-1~deb13u1) over (257.8-1~deb13u2) ...
Setting up libsystemd-shared:amd64 (257.9-1~deb13u1) ...
(Reading database ... 20272 files and directories currently installed.)
Preparing to unpack .../systemd_257.9-1~deb13u1_amd64.deb ...
Unpacking systemd (257.9-1~deb13u1) over (257.8-1~deb13u2) ...
Preparing to unpack .../systemd-timesyncd_257.9-1~deb13u1_amd64.deb ...
Unpacking systemd-timesyncd (257.9-1~deb13u1) over (257.8-1~deb13u2) ...
Preparing to unpack .../udev_257.9-1~deb13u1_amd64.deb ...
Unpacking udev (257.9-1~deb13u1) over (257.8-1~deb13u2) ...
Preparing to unpack .../libudev1_257.9-1~deb13u1_amd64.deb ...
Unpacking libudev1:amd64 (257.9-1~deb13u1) over (257.8-1~deb13u2) ...
Setting up libudev1:amd64 (257.9-1~deb13u1) ...
(Reading database ... 20272 files and directories currently installed.)
Preparing to unpack .../openssl-provider-legacy_3.5.4-1~deb13u2_amd64.deb ...
Unpacking openssl-provider-legacy (3.5.4-1~deb13u2) over (3.5.1-1+deb13u1) ...
Setting up openssl-provider-legacy (3.5.4-1~deb13u2) ...
(Reading database ... 20272 files and directories currently installed.)
Preparing to unpack .../libssl3t64_3.5.4-1~deb13u2_amd64.deb ...
Unpacking libssl3t64:amd64 (3.5.4-1~deb13u2) over (3.5.1-1+deb13u1) ...
Setting up libssl3t64:amd64 (3.5.4-1~deb13u2) ...
(Reading database ... 20272 files and directories currently installed.)
Preparing to unpack .../postfix_3.10.5-1~deb13u1_amd64.deb ...
Unpacking postfix (3.10.5-1~deb13u1) over (3.10.4-1~deb13u1) ...
Preparing to unpack .../sqv_1.3.0-3+b2_amd64.deb ...
Unpacking sqv (1.3.0-3+b2) over (1.3.0-3) ...
Setting up sqv (1.3.0-3+b2) ...
(Reading database ... 20273 files and directories currently installed.)
Preparing to unpack .../00-dhcpcd-base_1%3a10.1.0-11+deb13u2_amd64.deb ...
Unpacking dhcpcd-base (1:10.1.0-11+deb13u2) over (1:10.1.0-11) ...
Preparing to unpack .../01-libxml2_2.12.7+dfsg+really2.9.14-2.1+deb13u2_amd64.deb ...
Unpacking libxml2:amd64 (2.12.7+dfsg+really2.9.14-2.1+deb13u2) over (2.12.7+dfsg+really2.9.14-2.1+deb13u1) ...
Preparing to unpack .../02-bind9-dnsutils_1%3a9.20.18-1~deb13u1_amd64.deb ...
Unpacking bind9-dnsutils (1:9.20.18-1~deb13u1) over (1:9.20.11-4) ...
Preparing to unpack .../03-bind9-host_1%3a9.20.18-1~deb13u1_amd64.deb ...
Unpacking bind9-host (1:9.20.18-1~deb13u1) over (1:9.20.11-4) ...
Preparing to unpack .../04-bind9-libs_1%3a9.20.18-1~deb13u1_amd64.deb ...
Unpacking bind9-libs:amd64 (1:9.20.18-1~deb13u1) over (1:9.20.11-4) ...
Preparing to unpack .../05-libcom-err2_1.47.2-3+b7_amd64.deb ...
Unpacking libcom-err2:amd64 (1.47.2-3+b7) over (1.47.2-3+b3) ...
Preparing to unpack .../06-inetutils-telnet_2%3a2.6-3+deb13u2_amd64.deb ...
Unpacking inetutils-telnet (2:2.6-3+deb13u2) over (2:2.6-3) ...
Preparing to unpack .../07-libc-l10n_2.41-12+deb13u1_all.deb ...
Unpacking libc-l10n (2.41-12+deb13u1) over (2.41-12) ...
Preparing to unpack .../08-wtmpdb_0.73.0-3+deb13u1_amd64.deb ...
Unpacking wtmpdb (0.73.0-3+deb13u1) over (0.73.0-3) ...
Preparing to unpack .../09-libpam-wtmpdb_0.73.0-3+deb13u1_amd64.deb ...
Unpacking libpam-wtmpdb:amd64 (0.73.0-3+deb13u1) over (0.73.0-3) ...
Preparing to unpack .../10-libwtmpdb0_0.73.0-3+deb13u1_amd64.deb ...
Unpacking libwtmpdb0:amd64 (0.73.0-3+deb13u1) over (0.73.0-3) ...
Preparing to unpack .../11-locales_2.41-12+deb13u1_all.deb ...
Unpacking locales (2.41-12+deb13u1) over (2.41-12) ...
Preparing to unpack .../12-distro-info-data_0.66+deb13u1_all.deb ...
Unpacking distro-info-data (0.66+deb13u1) over (0.66) ...
Preparing to unpack .../13-libcap2-bin_1%3a2.75-10+b3_amd64.deb ...
Unpacking libcap2-bin (1:2.75-10+b3) over (1:2.75-10+b1) ...
Preparing to unpack .../14-libgnutls30t64_3.8.9-3+deb13u2_amd64.deb ...
Unpacking libgnutls30t64:amd64 (3.8.9-3+deb13u2) over (3.8.9-3) ...
Preparing to unpack .../15-libss2_1.47.2-3+b7_amd64.deb ...
Unpacking libss2:amd64 (1.47.2-3+b7) over (1.47.2-3+b3) ...
Preparing to unpack .../16-openssl_3.5.4-1~deb13u2_amd64.deb ...
Unpacking openssl (3.5.4-1~deb13u2) over (3.5.1-1+deb13u1) ...
Preparing to unpack .../17-python3-urllib3_2.3.0-3+deb13u1_all.deb ...
Unpacking python3-urllib3 (2.3.0-3+deb13u1) over (2.3.0-3) ...
Setting up libgnutls30t64:amd64 (3.8.9-3+deb13u2) ...
Setting up libc-l10n (2.41-12+deb13u1) ...
Setting up distro-info-data (0.66+deb13u1) ...
Setting up systemd (257.9-1~deb13u1) ...
/usr/lib/tmpfiles.d/legacy.conf:14: Duplicate line for path "/run/lock", ignoring.
Setting up libcom-err2:amd64 (1.47.2-3+b7) ...
Setting up locales (2.41-12+deb13u1) ...
Generating locales (this might take a while)...
en_US.UTF-8... done
Generation complete.
Setting up libcap2-bin (1:2.75-10+b3) ...
Setting up systemd-timesyncd (257.9-1~deb13u1) ...
systemd-time-wait-sync.service is a disabled or a static unit not running, not starting it.
Setting up udev (257.9-1~deb13u1) ...
systemd-udevd.service is a disabled or a static unit not running, not starting it.
Setting up libss2:amd64 (1.47.2-3+b7) ...
Setting up dhcpcd-base (1:10.1.0-11+deb13u2) ...
Installing new version of config file /etc/dhcpcd.conf ...
Setting up logsave (1.47.2-3+b7) ...
Setting up python3-urllib3 (2.3.0-3+deb13u1) ...
Setting up postfix (3.10.5-1~deb13u1) ...
Postfix (main.cf) configuration was not modified by debconf. If you need to
make changes, edit /etc/postfix/main.cf (and others) as needed. To view
Postfix configuration values, see postconf(1).
After modifying main.cf, be sure to run 'systemctl reload postfix'.
Setting up libwtmpdb0:amd64 (0.73.0-3+deb13u1) ...
Setting up openssl (3.5.4-1~deb13u2) ...
Setting up libxml2:amd64 (2.12.7+dfsg+really2.9.14-2.1+deb13u2) ...
Setting up systemd-sysv (257.9-1~deb13u1) ...
Setting up bind9-libs:amd64 (1:9.20.18-1~deb13u1) ...
Setting up libpam-wtmpdb:amd64 (0.73.0-3+deb13u1) ...
Setting up inetutils-telnet (2:2.6-3+deb13u2) ...
Setting up libnss-systemd:amd64 (257.9-1~deb13u1) ...
Setting up e2fsprogs (1.47.2-3+b7) ...
Setting up wtmpdb (0.73.0-3+deb13u1) ...
Setting up libpam-systemd:amd64 (257.9-1~deb13u1) ...
Setting up bind9-host (1:9.20.18-1~deb13u1) ...
Setting up bind9-dnsutils (1:9.20.18-1~deb13u1) ...
Processing triggers for man-db (2.13.1-1) ...
Processing triggers for dbus (1.16.2-2) ...
Processing triggers for shared-mime-info (2.4-5+b2) ...
Processing triggers for procps (2:4.0.4-9) ...
Processing triggers for debianutils (5.23.2) ...
Processing triggers for libc-bin (2.41-12+deb13u1) ...
Processing triggers for postfix (3.10.5-1~deb13u1) ...
Restarting postfix
[2026-03-08 09:45:01] [OK] Updated Container OS
[2026-03-08 09:45:02] [INFO] Installing Dependencies
Selecting previously unselected package minio.
(Reading database ... 20272 files and directories currently installed.)
Preparing to unpack minio.deb ...
Unpacking minio (20250907161309.0.0) ...
Setting up minio (20250907161309.0.0) ...
[2026-03-08 09:45:09] [OK] Installed Dependencies
[2026-03-08 09:45:09] [INFO] Setup PostgreSQL 16
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
Hit:1 http://security.debian.org trixie-security InRelease
Hit:2 http://deb.debian.org/debian trixie InRelease
Hit:3 http://deb.debian.org/debian trixie-updates InRelease
Reading package lists...
Building dependency tree...
Reading state information...
All packages are up to date.
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
Hit:1 http://deb.debian.org/debian trixie InRelease
Hit:2 http://security.debian.org trixie-security InRelease
Hit:3 http://deb.debian.org/debian trixie-updates InRelease
Get:4 https://apt.postgresql.org/pub/repos/apt trixie-pgdg InRelease [180 kB]
Get:5 https://apt.postgresql.org/pub/repos/apt trixie-pgdg/main amd64 Packages [413 kB]
Fetched 593 kB in 1s (1,083 kB/s)
Reading package lists...
Building dependency tree...
Reading state information...
All packages are up to date.
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
Hit:1 http://security.debian.org trixie-security InRelease
Hit:2 http://deb.debian.org/debian trixie InRelease
Hit:3 http://deb.debian.org/debian trixie-updates InRelease
Hit:4 https://apt.postgresql.org/pub/repos/apt trixie-pgdg InRelease
Reading package lists...
Building dependency tree...
Reading state information...
All packages are up to date.
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
Reading package lists...
Building dependency tree...
Reading state information...
Installing:
ssl-cert
Summary:
Upgrading: 0, Installing: 1, Removing: 0, Not Upgrading: 0
Download size: 16.8 kB
Space needed: 62.5 kB / 6,930 MB available
Get:1 http://deb.debian.org/debian trixie/main amd64 ssl-cert all 1.1.3 [16.8 kB]
Preconfiguring packages ...
Fetched 16.8 kB in 0s (149 kB/s)
Selecting previously unselected package ssl-cert.
(Reading database ... 20278 files and directories currently installed.)
Preparing to unpack .../ssl-cert_1.1.3_all.deb ...
Unpacking ssl-cert (1.1.3) ...
Setting up ssl-cert (1.1.3) ...
Processing triggers for man-db (2.13.1-1) ...
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
Reading package lists...
Building dependency tree...
Reading state information...
Installing:
postgresql-16 postgresql-client-16
Installing dependencies:
libcommon-sense-perl libsensors-config postgresql-client-common
libjson-perl libsensors5 postgresql-common
libjson-xs-perl libtypes-serialiser-perl sysstat
libllvm19 libxslt1.1
libpq5 libz3-4
Suggested packages:
libpq-oauth lm-sensors postgresql-doc-16 isag
Summary:
Upgrading: 0, Installing: 15, Removing: 0, Not Upgrading: 0
Download size: 54.1 MB
Space needed: 229 MB / 6,930 MB available
Get:1 http://deb.debian.org/debian trixie/main amd64 libjson-perl all 4.10000-1 [87.5 kB]
Get:2 http://deb.debian.org/debian trixie/main amd64 libcommon-sense-perl amd64 3.75-3+b5 [22.9 kB]
Get:3 https://apt.postgresql.org/pub/repos/apt trixie-pgdg/main amd64 postgresql-client-common all 290.pgdg13+1 [48.1 kB]
Get:4 http://deb.debian.org/debian trixie/main amd64 libtypes-serialiser-perl all 1.01-1 [12.2 kB]
Get:5 http://deb.debian.org/debian trixie/main amd64 libjson-xs-perl amd64 4.040-1~deb13u1 [91.0 kB]
Get:6 http://deb.debian.org/debian trixie/main amd64 libz3-4 amd64 4.13.3-1 [8,560 kB]
Get:7 https://apt.postgresql.org/pub/repos/apt trixie-pgdg/main amd64 postgresql-common all 290.pgdg13+1 [113 kB]
Get:8 https://apt.postgresql.org/pub/repos/apt trixie-pgdg/main amd64 libpq5 amd64 18.3-1.pgdg13+1 [257 kB]
Get:9 https://apt.postgresql.org/pub/repos/apt trixie-pgdg/main amd64 postgresql-client-16 amd64 16.13-1.pgdg13+1 [1,951 kB]
Get:10 https://apt.postgresql.org/pub/repos/apt trixie-pgdg/main amd64 postgresql-16 amd64 16.13-1.pgdg13+1 [16.0 MB]
Get:11 http://deb.debian.org/debian trixie/main amd64 libllvm19 amd64 1:19.1.7-3+b1 [26.0 MB]
Get:12 http://deb.debian.org/debian trixie/main amd64 libsensors-config all 1:3.6.2-2 [16.2 kB]
Get:13 http://deb.debian.org/debian trixie/main amd64 libsensors5 amd64 1:3.6.2-2 [37.5 kB]
Get:14 http://deb.debian.org/debian trixie/main amd64 libxslt1.1 amd64 1.1.35-1.2+deb13u2 [233 kB]
Get:15 http://deb.debian.org/debian trixie/main amd64 sysstat amd64 12.7.5-2 [623 kB]
Preconfiguring packages ...
Fetched 54.1 MB in 3s (18.9 MB/s)
Selecting previously unselected package libjson-perl.
(Reading database ... 20287 files and directories currently installed.)
Preparing to unpack .../00-libjson-perl_4.10000-1_all.deb ...
Unpacking libjson-perl (4.10000-1) ...
Selecting previously unselected package postgresql-client-common.
Preparing to unpack .../01-postgresql-client-common_290.pgdg13+1_all.deb ...
Unpacking postgresql-client-common (290.pgdg13+1) ...
Selecting previously unselected package postgresql-common.
Preparing to unpack .../02-postgresql-common_290.pgdg13+1_all.deb ...
Adding 'diversion of /usr/bin/pg_config to /usr/bin/pg_config.libpq-dev by postgresql-common'
Unpacking postgresql-common (290.pgdg13+1) ...
Selecting previously unselected package libcommon-sense-perl:amd64.
Preparing to unpack .../03-libcommon-sense-perl_3.75-3+b5_amd64.deb ...
Unpacking libcommon-sense-perl:amd64 (3.75-3+b5) ...
Selecting previously unselected package libtypes-serialiser-perl.
Preparing to unpack .../04-libtypes-serialiser-perl_1.01-1_all.deb ...
Unpacking libtypes-serialiser-perl (1.01-1) ...
Selecting previously unselected package libjson-xs-perl.
Preparing to unpack .../05-libjson-xs-perl_4.040-1~deb13u1_amd64.deb ...
Unpacking libjson-xs-perl (4.040-1~deb13u1) ...
Selecting previously unselected package libz3-4:amd64.
Preparing to unpack .../06-libz3-4_4.13.3-1_amd64.deb ...
Unpacking libz3-4:amd64 (4.13.3-1) ...
Selecting previously unselected package libllvm19:amd64.
Preparing to unpack .../07-libllvm19_1%3a19.1.7-3+b1_amd64.deb ...
Unpacking libllvm19:amd64 (1:19.1.7-3+b1) ...
Selecting previously unselected package libpq5:amd64.
Preparing to unpack .../08-libpq5_18.3-1.pgdg13+1_amd64.deb ...
Unpacking libpq5:amd64 (18.3-1.pgdg13+1) ...
Selecting previously unselected package libsensors-config.
Preparing to unpack .../09-libsensors-config_1%3a3.6.2-2_all.deb ...
Unpacking libsensors-config (1:3.6.2-2) ...
Selecting previously unselected package libsensors5:amd64.
Preparing to unpack .../10-libsensors5_1%3a3.6.2-2_amd64.deb ...
Unpacking libsensors5:amd64 (1:3.6.2-2) ...
Selecting previously unselected package libxslt1.1:amd64.
Preparing to unpack .../11-libxslt1.1_1.1.35-1.2+deb13u2_amd64.deb ...
Unpacking libxslt1.1:amd64 (1.1.35-1.2+deb13u2) ...
Selecting previously unselected package postgresql-client-16.
Preparing to unpack .../12-postgresql-client-16_16.13-1.pgdg13+1_amd64.deb ...
Unpacking postgresql-client-16 (16.13-1.pgdg13+1) ...
Selecting previously unselected package postgresql-16.
Preparing to unpack .../13-postgresql-16_16.13-1.pgdg13+1_amd64.deb ...
Unpacking postgresql-16 (16.13-1.pgdg13+1) ...
Selecting previously unselected package sysstat.
Preparing to unpack .../14-sysstat_12.7.5-2_amd64.deb ...
Unpacking sysstat (12.7.5-2) ...
Setting up postgresql-client-common (290.pgdg13+1) ...
Setting up libsensors-config (1:3.6.2-2) ...
Setting up libpq5:amd64 (18.3-1.pgdg13+1) ...
Setting up libcommon-sense-perl:amd64 (3.75-3+b5) ...
Setting up libz3-4:amd64 (4.13.3-1) ...
Setting up libsensors5:amd64 (1:3.6.2-2) ...
Setting up libtypes-serialiser-perl (1.01-1) ...
Setting up libjson-perl (4.10000-1) ...
Setting up libxslt1.1:amd64 (1.1.35-1.2+deb13u2) ...
Setting up sysstat (12.7.5-2) ...
Creating config file /etc/default/sysstat with new version
update-alternatives: using /usr/bin/sar.sysstat to provide /usr/bin/sar (sar) in auto mode
Created symlink '/etc/systemd/system/sysstat.service.wants/sysstat-collect.timer' β '/usr/lib/systemd/system/sysstat-collect.timer'.
Created symlink '/etc/systemd/system/sysstat.service.wants/sysstat-rotate.timer' β '/usr/lib/systemd/system/sysstat-rotate.timer'.
Created symlink '/etc/systemd/system/sysstat.service.wants/sysstat-summary.timer' β '/usr/lib/systemd/system/sysstat-summary.timer'.
Created symlink '/etc/systemd/system/multi-user.target.wants/sysstat.service' β '/usr/lib/systemd/system/sysstat.service'.
Setting up libjson-xs-perl (4.040-1~deb13u1) ...
Setting up libllvm19:amd64 (1:19.1.7-3+b1) ...
Setting up postgresql-client-16 (16.13-1.pgdg13+1) ...
update-alternatives: using /usr/share/postgresql/16/man/man1/psql.1.gz to provide /usr/share/man/man1/psql.1.gz (psql.1.gz) in auto mode
Setting up postgresql-common (290.pgdg13+1) ...
Creating config file /etc/postgresql-common/createcluster.conf with new version
Building PostgreSQL dictionaries from installed myspell/hunspell packages...
Removing obsolete dictionary files:
Created symlink '/etc/systemd/system/multi-user.target.wants/postgresql.service' β '/usr/lib/systemd/system/postgresql.service'.
Setting up postgresql-16 (16.13-1.pgdg13+1) ...
Creating new PostgreSQL cluster 16/main ...
/usr/lib/postgresql/16/bin/initdb -D /var/lib/postgresql/16/main --auth-local peer --auth-host scram-sha-256 --no-instructions
The files belonging to this database system will be owned by user "postgres".
This user must also own the server process.
The database cluster will be initialized with locale "en_US.UTF-8".
The default database encoding has accordingly been set to "UTF8".
The default text search configuration will be set to "english".
Data page checksums are disabled.
fixing permissions on existing directory /var/lib/postgresql/16/main ... ok
creating subdirectories ... ok
selecting dynamic shared memory implementation ... posix
selecting default max_connections ... 100
selecting default shared_buffers ... 128MB
selecting default time zone ... Europe/Warsaw
creating configuration files ... ok
running bootstrap script ... ok
performing post-bootstrap initialization ... ok
syncing data to disk ... ok
Processing triggers for man-db (2.13.1-1) ...
Processing triggers for libc-bin (2.41-12+deb13u1) ...
Synchronizing state of postgresql.service with SysV service script with /usr/lib/systemd/systemd-sysv-install.
Executing: /usr/lib/systemd/systemd-sysv-install enable postgresql
[2026-03-08 09:45:31] [OK] Setup PostgreSQL 16
[2026-03-08 09:45:31] [INFO] Setting up PostgreSQL Database
CREATE ROLE
CREATE DATABASE
ALTER ROLE
ALTER ROLE
ALTER ROLE
[2026-03-08 09:45:31] [WARN] Granting SUPERUSER privilege (security risk!)
GRANT
ALTER ROLE
[2026-03-08 09:45:31] [OK] Set up PostgreSQL Database
[2026-03-08 09:45:31] [INFO] Setup Node.js 24
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
Hit:1 http://security.debian.org trixie-security InRelease
Hit:2 http://deb.debian.org/debian trixie InRelease
Hit:3 http://deb.debian.org/debian trixie-updates InRelease
Hit:4 https://apt.postgresql.org/pub/repos/apt trixie-pgdg InRelease
Reading package lists...
Building dependency tree...
Reading state information...
All packages are up to date.
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
Get:1 https://deb.nodesource.com/node_24.x nodistro InRelease [12.1 kB]
Hit:2 http://deb.debian.org/debian trixie InRelease
Hit:3 http://deb.debian.org/debian trixie-updates InRelease
Get:4 https://deb.nodesource.com/node_24.x nodistro/main amd64 Packages [5,680 B]
Hit:5 http://security.debian.org trixie-security InRelease
Hit:6 https://apt.postgresql.org/pub/repos/apt trixie-pgdg InRelease
Fetched 17.8 kB in 1s (29.1 kB/s)
Reading package lists...
Building dependency tree...
Reading state information...
All packages are up to date.
WARNING: apt does not have a stable CLI interface. Use with caution in scripts.
Reading package lists...
Building dependency tree...
Reading state information...
Installing:
nodejs
Summary:
Upgrading: 0, Installing: 1, Removing: 0, Not Upgrading: 0
Download size: 38.2 MB
Space needed: 234 MB / 6,653 MB available
Get:1 https://deb.nodesource.com/node_24.x nodistro/main amd64 nodejs amd64 24.14.0-1nodesource1 [38.2 MB]
Fetched 38.2 MB in 3s (13.0 MB/s)
Selecting previously unselected package nodejs.
(Reading database ... 22678 files and directories currently installed.)
Preparing to unpack .../nodejs_24.14.0-1nodesource1_amd64.deb ...
Unpacking nodejs (24.14.0-1nodesource1) ...
Setting up nodejs (24.14.0-1nodesource1) ...
Processing triggers for man-db (2.13.1-1) ...
removed 15 packages, and changed 34 packages in 3s
15 packages are looking for funding
run `npm fund` for details
[2026-03-08 09:45:46] [OK] Setup Node.js 24
/usr/lib
βββ (empty)
[2026-03-08 09:45:46] [ERROR] in line 6079: exit code 1 (General error / Operation not permitted)
[2026-03-08 09:45:46] npm list -g --depth=0 pnpm
[2026-03-08 09:45:46] [INFO] Installing pnpm@latest
added 1 package in 1s
1 package is looking for funding
run `npm fund` for details
[2026-03-08 09:45:48] [OK] Installed Node.js modules: pnpm@latest
[2026-03-08 09:45:48] [INFO] Fetching GitHub release: Reactive-Resume (1.2.7)
[2026-03-08 09:45:52] [OK] Deployed: Reactive-Resume (1.2.7)
[2026-03-08 09:45:52] [INFO] Setting up Reactive-Resume
Scope: all 7 workspace projects
βERR_PNPM_OUTDATED_LOCKFILEβ Cannot install with "frozen-lockfile" because pnpm-lock.yaml is not up to date with <ROOT>/libs/dto/package.json
Note that in CI environments this setting is true by default. If you still need to run install in such cases, use "pnpm install --no-frozen-lockfile"
Failure reason:
specifiers in the lockfile don't match specifiers in package.json:
* 7 dependencies were added: @reactive-resume/utils@*, @reactive-resume/schema@*, @sindresorhus/slugify@^2.2.1, nestjs-zod@^3.0.0, @swc/helpers@~0.5.11, zod@^3.24.1, @paralleldrive/cuid2@^2.2.2
[2026-03-08 09:45:53] [ERROR] in line 38: exit code 1 (General error / Operation not permitted)
[2026-03-08 09:45:53] pnpm install --frozen-lockfile
πΌοΈ Additional context (optional).
No response