Bump version to 3.3.2

Author: silvanocerza

README.md

@@ -24,7 +24,7 @@ brew install ipinfo-cli
 OR to install the latest `amd64` version without automatic updates:
 
 ```bash
-curl -Ls https://github.com/ipinfo/cli/releases/download/ipinfo-3.3.1/macos.sh | sh
+curl -Ls https://github.com/ipinfo/cli/releases/download/ipinfo-3.3.2/macos.sh | sh
 ```
 
 ### Ubuntu PPA
@@ -43,14 +43,14 @@ _Note_: this is a one-time installation; updates are not automatic. Use the PPA
 for automatic updates.
 
 ```bash
-curl -Ls https://github.com/ipinfo/cli/releases/download/ipinfo-3.3.1/deb.sh | sh
+curl -Ls https://github.com/ipinfo/cli/releases/download/ipinfo-3.3.2/deb.sh | sh
 ```
 
 OR
 
 ```bash
-curl -LO https://github.com/ipinfo/cli/releases/download/ipinfo-3.3.1/ipinfo_3.3.1_linux_{arch}.deb
-sudo dpkg -i ipinfo_3.3.1_linux_{arch}.deb
+curl -LO https://github.com/ipinfo/cli/releases/download/ipinfo-3.3.2/ipinfo_3.3.2_linux_{arch}.deb
+sudo dpkg -i ipinfo_3.3.2_linux_{arch}.deb
 ```
 
 where `{arch}` can be 386, amd64, arm, or arm64.
@@ -73,7 +73,7 @@ makepkg -si
 _Note_: run powershell as administrator before executing this command.
 
 ```bash
-iwr -useb https://github.com/ipinfo/cli/releases/download/ipinfo-3.3.1/windows.ps1 | iex
+iwr -useb https://github.com/ipinfo/cli/releases/download/ipinfo-3.3.2/windows.ps1 | iex
 ```
 
 ### Scoop
@@ -85,15 +85,15 @@ scoop install ipinfo-cli
 ### Docker
 
 ```bash
-docker run --rm -it ipinfo/ipinfo:3.3.1
+docker run --rm -it ipinfo/ipinfo:3.3.2
 ```
 
 To save the CLI's config, add `-v "/path_to_config:/root/.config/ipinfo"`. For
 example, the following command saves the config to the `ipinfo` directory in
 the current working directory.
 
 ```bash
-docker run --rm -it -v "$PWD/ipinfo:/root/.config/ipinfo" ipinfo/ipinfo:3.3.1
+docker run --rm -it -v "$PWD/ipinfo:/root/.config/ipinfo" ipinfo/ipinfo:3.3.2
 ```
 
 ### Using `go install`
@@ -145,12 +145,12 @@ After choosing a platform `PLAT` from above, run:
 
 ```bash
 # for Windows, use ".zip" instead of ".tar.gz"
-curl -LO https://github.com/ipinfo/cli/releases/download/ipinfo-3.3.1/ipinfo_3.3.1_${PLAT}.tar.gz
+curl -LO https://github.com/ipinfo/cli/releases/download/ipinfo-3.3.2/ipinfo_3.3.2_${PLAT}.tar.gz
 # OR
-wget https://github.com/ipinfo/cli/releases/download/ipinfo-3.3.1/ipinfo_3.3.1_${PLAT}.tar.gz
+wget https://github.com/ipinfo/cli/releases/download/ipinfo-3.3.2/ipinfo_3.3.2_${PLAT}.tar.gz
 
-tar -xvf ipinfo_3.3.1_${PLAT}.tar.gz
-sudo mv ipinfo_3.3.1_${PLAT} /usr/local/bin/ipinfo
+tar -xvf ipinfo_3.3.2_${PLAT}.tar.gz
+sudo mv ipinfo_3.3.2_${PLAT} /usr/local/bin/ipinfo
 ```
 
 ### Using `git`

cidr2ip/CHANGELOG.md

@@ -1,7 +1,13 @@
+# 3.3.2
+
+- Errors now go to stderr instead of stdout.
+- Windows release zip now contains `cidr2ip.exe` instead of the versioned filename.
+- Install scripts (`deb.sh`, `windows.ps1`) now fail loudly when installation does not succeed.
+
 # 1.0.0
 
-* `cidr2ip` converts CIDRs to individual IPs within those CIDRs.
-* The command exists as a standalone binary in addition to as a subcommand on the
-main `ipinfo` command.
-* `cidr2ip` accepts inputs the same way our other commands do, via stdin, args,
-files, etc.
+- `cidr2ip` converts CIDRs to individual IPs within those CIDRs.
+- The command exists as a standalone binary in addition to as a subcommand on the
+  main `ipinfo` command.
+- `cidr2ip` accepts inputs the same way our other commands do, via stdin, args,
+  files, etc.

cidr2range/CHANGELOG.md

@@ -1,5 +1,11 @@
+# 3.3.2
+
+- Errors now go to stderr instead of stdout.
+- Windows release zip now contains `cidr2range.exe` instead of the versioned filename.
+- Install scripts (`deb.sh`, `windows.ps1`) now fail loudly when installation does not succeed.
+
 # 1.2.0
 
-* When `cidr2range` accepts a file, it now also looks to see if there is a
-header in CSV form, and if so changes the first column to range, just as it
-changes the first non-header columns from CIDRs to IP ranges.
+- When `cidr2range` accepts a file, it now also looks to see if there is a
+  header in CSV form, and if so changes the first column to range, just as it
+  changes the first non-header columns from CIDRs to IP ranges.

grepdomain/CHANGELOG.md

@@ -1,5 +1,10 @@
+# 3.3.2
+
+- Errors now go to stderr instead of stdout.
+- Windows release zip now contains `grepdomain.exe` instead of the versioned filename.
+- Install scripts (`deb.sh`, `windows.ps1`) now fail loudly when installation does not succeed.
+
 # 1.0.0
 
 - This new command `grepdomain` is similar to `grepip` but meant just for
   domain names.
-

grepip/CHANGELOG.md

@@ -1,7 +1,14 @@
+# 3.3.2
+
+- Errors now go to stderr instead of stdout.
+- Fixed `--include-cidrs` / `--include-ranges` dropping every CIDR and range match when combined with `--exclude-reserved` (`-x`).
+- Windows release zip now contains `grepip.exe` instead of the versioned filename.
+- Install scripts (`deb.sh`, `windows.ps1`) now fail loudly when installation does not succeed.
+
 # 1.2.3
 
-* Added new flags: `--include-cidrs`, `--include-ranges`, `--cidrs-only`, `--ranges-only`
+- Added new flags: `--include-cidrs`, `--include-ranges`, `--cidrs-only`, `--ranges-only`
 
 # 1.2.2
 
-* Some special bogon edge cases are now properly ignored by grepip when requested.
+- Some special bogon edge cases are now properly ignored by grepip when requested.

ipinfo/CHANGELOG.md

@@ -1,3 +1,10 @@
+# 3.3.2
+
+- Errors and warnings now go to stderr instead of stdout, so they no longer pollute pipelines.
+- Fixed `grepip --include-cidrs` / `--include-ranges` dropping every CIDR and range match when combined with `--exclude-reserved` (`-x`).
+- Fixed `winget install ipinfo` leaving an unusable binary: the Windows release zip now contains `ipinfo.exe` instead of the versioned filename.
+- Install scripts (`deb.sh`, `windows.ps1`) now fail loudly when installation does not succeed, instead of printing a success message anyway.
+
 # 3.3.1
 
 - Added support for Windows ARM64.
@@ -44,56 +51,56 @@
 
 # 3.2.0
 
-* `ipinfo tool prefix` introduced with some misc. prefix tools. Currently supports following subcommands:
-    - `addr` returns the base IP address of a prefix.
-    - `bits` returns the length of a prefix and reports `-1` if invalid.
-    - `masked` returns canonical form of a prefix, masking off non-high bits, and returns the zero if invalid.
-    - `is_valid` reports whether a prefix is valid.
+- `ipinfo tool prefix` introduced with some misc. prefix tools. Currently supports following subcommands:
+  - `addr` returns the base IP address of a prefix.
+  - `bits` returns the length of a prefix and reports `-1` if invalid.
+  - `masked` returns canonical form of a prefix, masking off non-high bits, and returns the zero if invalid.
+  - `is_valid` reports whether a prefix is valid.
 
 ## Pull Requests
 
-* [#179](https://github.com/ipinfo/cli/pull/179)
-* [#180](https://github.com/ipinfo/cli/pull/180)
+- [#179](https://github.com/ipinfo/cli/pull/179)
+- [#180](https://github.com/ipinfo/cli/pull/180)
 
 # 3.1.1
 
-* Fixed return errors in IP parsing generic funcs.
+- Fixed return errors in IP parsing generic funcs.
 
 # 3.1.0
 
-* IP calculator introduced in `calc` subcommand for doing arbitrary arithmetic
-on IP addresses.
-* Bulk ASN now supported via `asn bulk` subcommand.
-* `ipinfo tool upper` introduced to get the upper IP of an IP range or CIDR.
-* `ipinfo tool lower` introduced to get the lower IP of an IP range or CIDR.
-* `ipinfo tool next` introduced to get the next IP of a given IP.
-* `ipinfo tool prev` introduced to get the previous IP of a given IP.
-* `ipinfo tool is_v4` introduced to check whether an IP is v4.
-* `ipinfo tool is_v6` introduced to check whether an IP is v6.
-* `ipinfo tool is_one_ip` introduced to check whether an IP range or CIDR
-* contains only a single IP.
-* `ipinfo tool is_valid` introduced to check whether an IP is a valid IP or
-not.
-* `ipinfo tool unmap` introduced to return an IP with any IPv4-mapped IPv6
-address prefix removed.
-* Fixed CLI token parameter not being recognized in `download` subcommand.
-* Fixed CLI login not getting saved after init.
-* Now performing a checksum comparison on database downloads.
-* YAML output now has null values removed for cleaner output.
+- IP calculator introduced in `calc` subcommand for doing arbitrary arithmetic
+  on IP addresses.
+- Bulk ASN now supported via `asn bulk` subcommand.
+- `ipinfo tool upper` introduced to get the upper IP of an IP range or CIDR.
+- `ipinfo tool lower` introduced to get the lower IP of an IP range or CIDR.
+- `ipinfo tool next` introduced to get the next IP of a given IP.
+- `ipinfo tool prev` introduced to get the previous IP of a given IP.
+- `ipinfo tool is_v4` introduced to check whether an IP is v4.
+- `ipinfo tool is_v6` introduced to check whether an IP is v6.
+- `ipinfo tool is_one_ip` introduced to check whether an IP range or CIDR
+- contains only a single IP.
+- `ipinfo tool is_valid` introduced to check whether an IP is a valid IP or
+  not.
+- `ipinfo tool unmap` introduced to return an IP with any IPv4-mapped IPv6
+  address prefix removed.
+- Fixed CLI token parameter not being recognized in `download` subcommand.
+- Fixed CLI login not getting saved after init.
+- Now performing a checksum comparison on database downloads.
+- YAML output now has null values removed for cleaner output.
 
 ## Pull Requests
 
-* [#157](https://github.com/ipinfo/cli/pull/157)
-* [#158](https://github.com/ipinfo/cli/pull/158)
-* [#160](https://github.com/ipinfo/cli/pull/160)
-* [#154](https://github.com/ipinfo/cli/pull/154)
-* [#161](https://github.com/ipinfo/cli/pull/161)
-* [#159](https://github.com/ipinfo/cli/pull/159)
-* [#162](https://github.com/ipinfo/cli/pull/162)
-* [#155](https://github.com/ipinfo/cli/pull/155)
-* [#165](https://github.com/ipinfo/cli/pull/165)
-* [#164](https://github.com/ipinfo/cli/pull/164)
-* [#172](https://github.com/ipinfo/cli/pull/172)
-* [#169](https://github.com/ipinfo/cli/pull/169)
-* [#170](https://github.com/ipinfo/cli/pull/170)
-* [#173](https://github.com/ipinfo/cli/pull/173)
+- [#157](https://github.com/ipinfo/cli/pull/157)
+- [#158](https://github.com/ipinfo/cli/pull/158)
+- [#160](https://github.com/ipinfo/cli/pull/160)
+- [#154](https://github.com/ipinfo/cli/pull/154)
+- [#161](https://github.com/ipinfo/cli/pull/161)
+- [#159](https://github.com/ipinfo/cli/pull/159)
+- [#162](https://github.com/ipinfo/cli/pull/162)
+- [#155](https://github.com/ipinfo/cli/pull/155)
+- [#165](https://github.com/ipinfo/cli/pull/165)
+- [#164](https://github.com/ipinfo/cli/pull/164)
+- [#172](https://github.com/ipinfo/cli/pull/172)
+- [#169](https://github.com/ipinfo/cli/pull/169)
+- [#170](https://github.com/ipinfo/cli/pull/170)
+- [#173](https://github.com/ipinfo/cli/pull/173)

ipinfo/deb.sh

@@ -2,7 +2,7 @@
 
 set -e
 
-VSN=3.3.1
+VSN=3.3.2
 DEFAULT_ARCH=amd64
 
 ARCH=$(uname -m)

ipinfo/macos.sh

@@ -2,7 +2,7 @@
 
 set -e
 
-VSN=3.3.1
+VSN=3.3.2
 PLAT=darwin_amd64
 
 curl -LO https://github.com/ipinfo/cli/releases/download/ipinfo-${VSN}/ipinfo_${VSN}_${PLAT}.tar.gz

ipinfo/main.go

@@ -11,7 +11,7 @@ import (
 )
 
 var progBase = filepath.Base(os.Args[0])
-var version = "3.3.1"
+var version = "3.3.2"
 
 // global flags.
 var fHelp bool

ipinfo/windows.ps1

@@ -1,6 +1,6 @@
 $ErrorActionPreference = "Stop"
 
-$VSN = "3.3.1"
+$VSN = "3.3.2"
 
 # build the filename for the Zip archive and exe file
 $FileName = "ipinfo_$($VSN)_windows_amd64"
@@ -17,7 +17,7 @@ if (Test-Path "$env:LOCALAPPDATA\ipinfo\ipinfo.exe") {
 }
 Rename-Item -Path "$env:LOCALAPPDATA\ipinfo\$FileName.exe" -NewName "ipinfo.exe"
 
-# setting up env. 
+# setting up env.
 $PathContent = [Environment]::GetEnvironmentVariable('path', 'Machine')
 $IPinfoPath = "$env:LOCALAPPDATA\ipinfo"