Hi, thank you for your code. I'm using a TTGO ESP32 SX1276 Lora 868 ali express
parameters = {
'tx_power_level': 2,
'signal_bandwidth': 'SF7BW125',
'spreading_factor': 7,
'coding_rate': 5,
'sync_word': 0x34,
'implicit_header': False,
'preamble_length': 8,
'enable_CRC': True,
'invert_IQ': False,
}
with enable_CRC changed to true and
'LORA_CS': const(18),
'LORA_SCK': const(5),
'LORA_MOSI': const(27),
'LORA_MISO': const(19),
'LORA_IRQ': const(26),
'LORA_RST': const(14),
Sending dat is working. But still i cannot get any data received. To send data I tried to send two bytes using uplink in ttn console. 'Frame Counter Width' is 16 and 'framecounter checks' is off. Where Do I have to look at or debug tips to fix this issue?
Hi, thank you for your code. I'm using a TTGO ESP32 SX1276 Lora 868 ali express
with
enable_CRCchanged to true andSending dat is working. But still i cannot get any data received. To send data I tried to send two bytes using uplink in ttn console. 'Frame Counter Width' is 16 and 'framecounter checks' is off. Where Do I have to look at or debug tips to fix this issue?