Installation Failed

[jimford-sudo]

sudo apt-get install python-dev python-pip python-virtualenv
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'python-dev-is-python2' instead of 'python-dev'
Package python-virtualenv is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Unable to locate package python-pip
E: Package 'python-virtualenv' has no installation candidate

[edariasdev]

Try installing pip3 first, it worked for me based on his steps after using, though I'm on Ubuntu 20.04 LTS for a Raspberry Pi. You will need to check, Centos7 for example, comes with Python 2.7 and no PIP.

[mikeandamy1013]

same issue,
i ran sudo apt-get -y install python3-pip to install pip3 but got the same error. i moved forward and got error on
ubuntu@ubuntu:/$ pip3 install --upgrade 'setuptools<45.0.0'
Collecting setuptools<45.0.0
Downloading setuptools-44.1.1-py2.py3-none-any.whl (583 kB)
|████████████████████████████████| 583 kB 3.1 MB/s
ERROR: launchpadlib 1.10.13 requires testresources, which is not installed.
Installing collected packages: setuptools
WARNING: The scripts easy_install and easy_install-3.8 are installed in '/home/ubuntu/.local/bin' which is not on PATH.
Consider adding this directory to PATH or, if you prefer to suppress this warning, use --no-warn-script-location.
Successfully installed setuptools-44.1.1

[edariasdev]

I had to install testresources then launchpadlib before getting it to work:
pip3 install testresources && pip3 install launchpadlib

[mikeandamy1013]

how do i deal with this warning?
WARNING: The scripts easy_install and easy_install-3.8 are installed in '/home/ubuntu/.local/bin' which is not on PATH.

[mudmin]

Thanks for helping work this out. I got a lot of comments about why I didn't use this or that. This thing was pretty tricky to get working. I tried and gave up several times over the last few months until I got it working originally on an OrangePi on Ubuntu 18.

Are those of you having problems on Pi 4B? I think the instructions may be different for the 4b vs the 2/3.

[F1SMV]

Bonjour
i follow your tips but after send cmd : opencanaryd --start i had some errors 👍 (raspi 4+ ubuntu 32 bits)

ubuntu@ubuntu:~$ opencanaryd --start
Unhandled Error
Traceback (most recent call last):
File "/usr/local/lib/python3.8/dist-packages/Twisted-19.10.0-py3.8-linux-aarch64.egg/twisted/application/app.py", line 674, in run
runApp(config)
File "/usr/local/lib/python3.8/dist-packages/Twisted-19.10.0-py3.8-linux-aarch64.egg/twisted/scripts/twistd.py", line 25, in runApp
runner.run()
File "/usr/local/lib/python3.8/dist-packages/Twisted-19.10.0-py3.8-linux-aarch64.egg/twisted/application/app.py", line 381, in run
self.application = self.createOrGetApplication()
File "/usr/local/lib/python3.8/dist-packages/Twisted-19.10.0-py3.8-linux-aarch64.egg/twisted/application/app.py", line 453, in createOrGetApplication
application = getApplication(self.config, passphrase)
--- ---
File "/usr/local/lib/python3.8/dist-packages/Twisted-19.10.0-py3.8-linux-aarch64.egg/twisted/application/app.py", line 464, in getApplication
application = service.loadApplication(filename, style, passphrase)
File "/usr/local/lib/python3.8/dist-packages/Twisted-19.10.0-py3.8-linux-aarch64.egg/twisted/application/service.py", line 416, in loadApplication
application = sob.loadValueFromFile(filename, 'application')
File "/usr/local/lib/python3.8/dist-packages/Twisted-19.10.0-py3.8-linux-aarch64.egg/twisted/persisted/sob.py", line 177, in loadValueFromFile
eval(codeObj, d, d)
File "/usr/local/bin/opencanary.tac", line 4, in
import('pkg_resources').run_script('opencanary==0.5.6', 'opencanary.tac')
File "/usr/local/lib/python3.8/dist-packages/pkg_resources/init.py", line 663, in run_script
name = ns['name']
builtins.KeyError: 'name'

Failed to load application: 'name'

how i can fix these ?

thank for help and your work.
Eric

[Houdini7]

Looks like you're using Ubuntu 20.xx Try ubuntu 18.xx
I had the same issues with 20.xx but redoing it with 18.xx worked fine for me

[mikeandamy1013]

yep, don't use ver20, use ver 18. followed script and had no issues. thank you for your help

[psu1989]

Any help with this on Pi3?

(env) pi@raspberrypi:~ $ opencanaryd --start
** We hope you enjoy using OpenCanary. For more open source Canary goodness, head over to canarytokens.org. **
[-] Failed to open opencanary.conf for reading ([Errno 2] No such file or directory: 'opencanary.conf')
[-] Failed to open /root/.opencanary.conf for reading ([Errno 2] No such file or directory: '/root/.opencanary.conf')
[-] Failed to open /etc/opencanaryd/opencanary.conf for reading ([Errno 2] No such file or directory: '/etc/opencanaryd/opencanary.conf')
/home/pi/env/local/lib/python2.7/site-packages/cryptography/init.py:39: CryptographyDeprecationWarning: Python 2 is no longer supported by the Python core team. Support for it is now deprecated in cryptography, and will be removed in a future release.
CryptographyDeprecationWarning,
Can't import RDP. Please ensure you have RDP installed.
Can't import SNMP. Please ensure you have Scapy installed.
Error: config does not have 'logger' section

[edariasdev]

3 things; 1. Check what pip version you have and install Scapy if there is an applicable version for it. 2. Logger showing missing probably means the indentation in your config file is off, or is completely missing from the config. 3. RDP requires other modules being installed. I haven't been able to get that work yet. Ive made all my installs woth pip3 and python3

[F1SMV]

ok thank i found : curl -sSL https://smnbkly.co/opencanary-installer | sudo bash on https://smnbkly.co/blog/opencanary-free-flexible-distributed-honeypot which work in one cmd line...without smtp alert