New device support report

[arnaullopxirau]

Manufacturer: Salicru
Model (as written on the device label): SPS.3000.ADV RT2

/etc/nut/ups.conf

[nutdev1]
driver = "blazer_usb"
port = "auto"
vendorid = "2E66"
productid = "0101"
subdriver = "cypress"
desc = "Salicru ADV3000-RT (Voltronic Protocol)"

upsc nutdev1

Init SSL without certificate database
battery.charge: 100
battery.voltage: 82.10
battery.voltage.high: 78.00
battery.voltage.low: 62.40
battery.voltage.nominal: 72.0
device.mfr:
device.model: ADV3000
device.type: ups
driver.debug: 0
driver.flag.allow_killpower: 0
driver.name: blazer_usb
driver.parameter.pollinterval: 2
driver.parameter.port: auto
driver.parameter.productid: 0101
driver.parameter.subdriver: cypress
driver.parameter.synchronous: auto
driver.parameter.vendorid: 2E66
driver.state: quiet
driver.version: 2.8.1
driver.version.internal: 0.17
driver.version.usb: libusb-1.0.27 (API: 0x100010a)
input.current.nominal: 13.0
input.frequency: 50.0
input.frequency.nominal: 50
input.voltage: 231.3
input.voltage.fault: 231.4
input.voltage.nominal: 230
output.voltage: 231.4
ups.beeper.status: enabled
ups.delay.shutdown: 30
ups.delay.start: 180
ups.firmware: 02124.03
ups.load: 14
ups.mfr:
ups.model: ADV3000
ups.productid: 0101
ups.status: OL
ups.temperature: 22.0
ups.type: offline / line interactive
ups.vendorid: 2e66

[jimklimov]

Thanks!