i can't loading the code for CH32v003 AlexanderMandera

[mostafagoudahelal]

riscv-none-elf-g++: warning: '-x c++' after last input file has no effect
Interface Setup
81 08 06 16 00 00 00 00 01
Found WCH Link
WCH Programmer is LinkE version 2.18
Part Type (A): 0x0010 (This is the capacity code, in KB)
Part UUID : 33-c0-ab-cd-9c-e5-bd-58
PFlags : ff-ff-ff-ff
Part Type (B): 00-32-05-10
Error sending WCH command (on send): Failed uploading: uploading error: exit status 0xfffffff7

[maxint-rd]

The core made by Alexander Mandera is based on the CNLohr/ch32v003fun environment. Both are different from the OpenWCH CH32 Arduino core where you have posted your issue.

Rather than just posting a short title and some output, can you perhaps describe your issue in English? Can you tell something about your development environment? Why are you posting here while mentioning AlexanderMandera in your title?

Since you're posting here, I suggest you first try to use this core and see if you can get a simple blink working, Good luck!

[mostafagoudahelal]

@maxint-rd
i used ch32v003A4M6 with TM1637 module that is good i need to add NTC thermistor to display the temperature but the flash memory is small
c:/users/mohamed/appdata/local/arduino15/packages/wch/tools/riscv-none-embed-gcc/8.2.0/bin/../lib/gcc/riscv-none-embed/8.2.0/../../../../riscv-none-embed/bin/ld.exe: C:\Users\mohamed\AppData\Local\Temp\arduino\sketches\EA721649227ACC8416C8E7244FD2D52B/AverageMeasurement.ino.elf section .text' will not fit in region FLASH'
c:/users/mohamed/appdata/local/arduino15/packages/wch/tools/riscv-none-embed-gcc/8.2.0/bin/../lib/gcc/riscv-none-embed/8.2.0/../../../../riscv-none-embed/bin/ld.exe: region `FLASH' overflowed by 3720 bytes
collect2.exe: error: ld returned 1 exit status

exit status 1

Compilation error: exit status 1

The core made by Alexander Mandera is based on the CNLohr/ch32v003fun environment. Both are different from the OpenWCH CH32 Arduino core where you have posted your issue.

Rather than just posting a short title and some output, can you perhaps describe your issue in English? Can you tell something about your development environment? Why are you posting here while mentioning AlexanderMandera in your title?

Since you're posting here, I suggest you first try to use this core and see if you can get a simple blink working, Good luck!