Nothing happens when I rung ./loadibec ../openiboot.img3

[zdavatz]

I put my iPhone into Recovery Mode on my Linux box (Turn off unconnected iPhone, hold Home button and connect USB to iPhone) and then run: ./loadibec ../openiboot.img3 but nothing happens. I have an 2G iPhone. The Recovery-Mode Screen does not go away. I just stays there.

[splatterb0y]

Keep holding home and lock button to hardreset it. It should boot normally then. Otherwise you have to restore it using the DFU-Mode.

[zdavatz]

Thanks! That is not the problem. I would like to install Android and I would expect the screen to change as I install openiboot. Or that is what the howto says.

[zdavatz]

The steps I am doing are:

1. Put your phone into Recovery Mode (not DFU Mode).
2. Run sudo ./loadibec openiboot.img3
3. The openiboot menu should now be displayed on your phone.

I get no openiboot menu.

According to:

http://www.idroidproject.org/wiki/Installing_iDroid_%28Linux%29

[splatterb0y]

It works for me. I am using an iTouch 1G with fw 3.1.2 and blackra1n.
We noticed some time ago that the jailbreak is important to load openiboot on the itouch 1g.

[zdavatz]

My phone is jailbroken with pwnage and Firmware version 3.1.2 (7D11). dmesg tells me: usb 1-3: USB disconnect, address 14
usb 1-3: new high speed USB device using ehci_hcd and address 15

[splatterb0y]

Maybe you want to try blackra1n jailbreak and test it again. I don't own an iPhone so sorry I can't really help you with that issue.

[zdavatz]

I could try installing openiboot from my Mac not my Linux. Can you point me to a Howto?

[splatterb0y]

Have you tried blackra1n?
You can compile loadibec and oibc for mac but you need to get a openiboot.img3 from linux, because it doesn't compile under mac (yet) .

[zdavatz]

How would I try blackra1n, my phone is already jailbroken?

[Anon0]

restore from itunes. Make sure that you download the same version that you already have installed( http://www.felixbruns.de/iPod/firmware/ ), put your phone in recovery mode and do a shift-click on the itunes restore button and select the fresh firmware package. After its been restored run blackra1n and then you're ready togo.

[zdavatz]

Ok, check this out in the latest kernel release: http://kerneltrap.org/mailarchive/linux-driver-devel/2010/3/31/6884240

There is a new iPhone driver in the Kernel that does not require a jailbroken iPhone! ;) Maybe that will help me. ;)

[zdavatz]

@Anon0 ok, I done as you advised and I installed 3.1.2 from Restore, then I ran Blackra1n. But now when I do sudo client/loadibec openiboot.img3 I still get the same result: No reaction. Nothing happens when I run that from my Linux box. Any hints?

[Anon0]

Im not sure if it will help ... but add a line to your makefile( at the top )-> PLATFORM=2G Then run 'make clean' and run make to rebuild.
I don't know if there is any specific 2G Code. I would need to read more code to find out. When it just doesn't load like that its most likely a config error.

Try running loadibec from the root openiboot dir ....
sudo ./client/loadibec openiboot.img3

[zdavatz]

Im not sure if it will help ... but add a line to your makefile( at the top )-> PLATFORM=2G Then run 'make clean' and run make to rebuild.

Sorry: What makefiles, what folder?

sudo ./client/loadibec openiboot.img3

That is exactly what I am doing!

[zdavatz]

Ok, I did the following: makes no difference:

~/.software/iphonelinux/openiboot/client> vi Makefile

~/.software/iphonelinux/openiboot/client> make clean

rm *.o
rm oibc
rm loadibec

~/.software/iphonelinux/openiboot/client> make

cc -DHAVE_GETEUID -I/opt/local-universal-10.4/include -c oibc.c -o oibc.o
cc -DHAVE_GETEUID -I/opt/local-universal-10.4/include oibc.o -L/opt/local-universal-10.4/lib -lusb -lpthread -lreadline -o oibc
cc -DHAVE_GETEUID -I/opt/local-universal-10.4/include -c loadibec.c -o loadibec.o
cc -DHAVE_GETEUID -I/opt/local-universal-10.4/include loadibec.o -L/opt/local-universal-10.4/lib -lusb-1.0 -o loadibec
cc -DHAVE_GETEUID -I/opt/local-universal-10.4/include -c linux.c -o linux.o
cc -DHAVE_GETEUID -I/opt/local-universal-10.4/include linux.o -lusb -lpthread -lncurses
-o linux

~/.software/iphonelinux/openiboot/client> cd ..

~/.software/iphonelinux/openiboot> sudo ./client/loadibec openiboot.img3

Would love to run Android on my iPhone. I am on Linux not on VirtualBox (Linux) on Mac.