Update Discourse data data [skip ci]

Author: precice-bot

assets/data/faq.json

@@ -1,6 +1,6 @@
 {
   "source": "preCICE Discourse (FAQ)",
-  "generated_at": "2026-04-05T07:01:23.077808",
+  "generated_at": "2026-04-06T07:25:13.450165",
   "topics": [
     {
       "id": 44,
@@ -9,7 +9,7 @@
       "url": "https://precice.discourse.group/t/what-are-best-practices-to-write-a-new-adapter/44",
       "created_at": "2019-10-10T20:26:55.265Z",
       "last_posted_at": "2026-01-03T13:02:38.553Z",
-      "views": 1528,
+      "views": 1529,
       "posts_count": 4,
       "like_count": 1,
       "excerpt": "Alex started a good discussion on the mailing list (May 3, 2019) about best practices when writing a new adapter:\nI wanted to ask if there are some additional guidelines on how to write good adapters for preCICE. I have the feeling that I might think\u2026"
@@ -21,7 +21,7 @@
       "url": "https://precice.discourse.group/t/can-precice-be-used-for-volume-coupling/27",
       "created_at": "2019-09-23T20:55:55.190Z",
       "last_posted_at": "2025-08-11T13:12:45.035Z",
-      "views": 3262,
+      "views": 3263,
       "posts_count": 10,
       "like_count": 2,
       "excerpt": "I read that you do surface coupling?\nDo you support volume coupling too?"
@@ -45,7 +45,7 @@
       "url": "https://precice.discourse.group/t/can-precice-be-used-with-moving-meshes/53",
       "created_at": "2019-10-14T12:30:50.463Z",
       "last_posted_at": "2024-06-06T02:01:13.798Z",
-      "views": 1549,
+      "views": 1550,
       "posts_count": 29,
       "like_count": 7,
       "excerpt": "What happens when the interface is moving?"
@@ -81,7 +81,7 @@
       "url": "https://precice.discourse.group/t/can-precice-be-used-with-gpus-or-other-accelerator-cards/822",
       "created_at": "2021-12-08T11:09:10.769Z",
       "last_posted_at": "2023-05-10T15:52:06.292Z",
-      "views": 916,
+      "views": 917,
       "posts_count": 6,
       "like_count": 4,
       "excerpt": "My target system features GPUs or other accelerator cards.\nCan preCICE use them to accelerate the simulation?"
@@ -141,7 +141,7 @@
       "url": "https://precice.discourse.group/t/help-the-participants-are-not-finding-each-other/646",
       "created_at": "2021-06-30T19:58:06.063Z",
       "last_posted_at": "2021-07-03T19:59:48.473Z",
-      "views": 2482,
+      "views": 2483,
       "posts_count": 4,
       "like_count": 1,
       "excerpt": "A possible situation, without an error: one or both/multiple participants display the message\nSetting up master communication to coupling partner/s\n\nand nothing happens, even though this step should complete instantaneously."
@@ -228,7 +228,7 @@
       "views": 503,
       "posts_count": 2,
       "like_count": 0,
-      "excerpt": ""
+      "excerpt": "Or: Can preCICE interpolate between an arbitrary / unstructured mesh and a regular / structured mesh?"
     },
     {
       "id": 55,
@@ -240,7 +240,7 @@
       "views": 474,
       "posts_count": 2,
       "like_count": 0,
-      "excerpt": ""
+      "excerpt": "I always hear that monolithic coupling is the only way to go, as partitioned coupling introduces error. Is this correct?"
     },
     {
       "id": 54,
@@ -252,7 +252,7 @@
       "views": 515,
       "posts_count": 2,
       "like_count": 0,
-      "excerpt": ""
+      "excerpt": "Can the individual solvers run on two different platforms on two different machines in/out of a network?"
     },
     {
       "id": 52,
@@ -264,7 +264,7 @@
       "views": 516,
       "posts_count": 2,
       "like_count": 0,
-      "excerpt": ""
+      "excerpt": "Which code is executing the coupling iterations given that preCICE does not really have a centralized engine to orchestrate the simulation?"
     },
     {
       "id": 26,
@@ -276,7 +276,7 @@
       "views": 585,
       "posts_count": 2,
       "like_count": 0,
-      "excerpt": ""
+      "excerpt": "How do you test preCICE and its official adapters?\nCan I trust you?"
     },
     {
       "id": 50,
@@ -288,7 +288,7 @@
       "views": 848,
       "posts_count": 2,
       "like_count": 0,
-      "excerpt": ""
+      "excerpt": "There are multiple OpenFOAM \u201cvariants\u201d, including openfoam.com, openfoam.org, and the early fork foam-extend. Which versions of them are compatible?"
     },
     {
       "id": 43,
@@ -300,7 +300,7 @@
       "views": 1009,
       "posts_count": 3,
       "like_count": 0,
-      "excerpt": ""
+      "excerpt": "Marta asked on the mailing list (March 28, 2019)\n\nI\u2019m using preCICE to couple two codes: the lattice Boltzmann code LUMIS and OpenFOAM. LUMIS has a time step 10 times smaller than OpenFOAM so during the coupling LUMIS subcycles before exchanging data\u2026"
     },
     {
       "id": 29,
@@ -312,7 +312,7 @@
       "views": 817,
       "posts_count": 2,
       "like_count": 0,
-      "excerpt": ""
+      "excerpt": "My solver offers adaptive mesh refinement.\nCan I use this with preCICE?"
     },
     {
       "id": 38,
@@ -324,7 +324,7 @@
       "views": 1130,
       "posts_count": 3,
       "like_count": 1,
-      "excerpt": ""
+      "excerpt": "A preCICE developer told me to try a \u201cPR\u201d (Pull Request). What is this and how do I try it?"
     },
     {
       "id": 42,
@@ -336,7 +336,7 @@
       "views": 740,
       "posts_count": 7,
       "like_count": 0,
-      "excerpt": ""
+      "excerpt": "We had a good discussion with Satish on the mailing list about the re-partitioning process and the connection to parallel data mapping in preCICE.\nSatish asked (July 24, 2019):\n\nIt seems to me that mappings can occur in parallel in preCICE. Is that c\u2026"
     },
     {
       "id": 41,
@@ -348,7 +348,7 @@
       "views": 745,
       "posts_count": 2,
       "like_count": 2,
-      "excerpt": ""
+      "excerpt": "Nikrouz asked on the mailing list (Sep 13, 2019):\n\nI am going to use OpenFoam-CalculiX for FSI simulations.\nAt this time, I am have technical question for preparing preCICE config file. The case I am going to run has very large deformations. Fortunat\u2026"
     },
     {
       "id": 36,
@@ -360,7 +360,7 @@
       "views": 643,
       "posts_count": 2,
       "like_count": 0,
-      "excerpt": ""
+      "excerpt": "The OpenFOAM adapter has the form of an OpenFOAM function object. This mechanism is commonly used only for post-processing, so a reasonable question is:\n\nDoes the OpenFOAM adapter also take care of the checkpointing? In other words, can a function ob\u2026"
     }
   ]
 }

assets/data/news.json

@@ -1,5 +1,5 @@
 {
-  "generated_at": "2026-04-05T07:01:20.062205",
+  "generated_at": "2026-04-06T07:25:06.720422",
   "topics": [
     {
       "id": 217,
@@ -22,7 +22,7 @@
       "last_posted_at": "2026-03-20T13:44:57.857Z",
       "like_count": 5,
       "posts_count": 3,
-      "views": 41,
+      "views": 42,
       "description": "Earlier this year, we started a quarterly Newsletter, highlighting the most important updates in the preCICE universe, including: New publications New features New adapters, bindings, tools, tutorials, and more Upcoming..."
     },
     {
@@ -262,7 +262,7 @@
       "last_posted_at": "2024-06-26T12:38:59.092Z",
       "like_count": 2,
       "posts_count": 1,
-      "views": 68,
+      "views": 69,
       "description": "This July, if you are in Canada or nearby, you have the rare opportunity of finding some of us with a training course, a session of user and developer talks,..."
     },
     {