Connect MikroTik to Interface 10/100 in OLT
- Set IP 136.1.1.200/24 in Mikrotik then ping to 136.1.1.100 (OLT)
- Telnet to 136.1.1.100 (via MikroTik in Tools > Telnet)
Enable plug-and-play of the OLT boards and add the chassis type
conf t
set-pnp enable
add-rack rackno 1 racktype C320Rack
add-shelf rackno 1 shelfno 1 shelftype C320_SHELF
add-card rackno 1 shelfno 1 slotno 2 GTGH (i used GTGH)
add-card rackno 1 shelfno 1 slotno 3 PRAM (if used PRAM)
add-subcard rackno 1 shelfno 1 slotno 4 subcardno 1 UCDC/1
Configure a new management IP address on the mng1 (out-of-band):
conf t
interface mng1
ip address 10.29.4.2 255.255.255.252 #Default IP 136.1.1.100, change as you need.
exit
line telnet idle-timeout 15 #(15 minute default)
end
Configure IP and VLAN via Uplink Port (i used gei_1/4/3)
conf t
vlan 2541 (VLAN ID for Management) #Please config this VLAN in Router, and pass this vlan throught switch
exit
interface vlan2541 #interface for Management VLAN
ip address 10.25.41.3 255.255.255.0 #10.25.41.1 as Gateway in Router
exit
ip route 0.0.0.0 0.0.0.0 10.25.41.1 #uplink via VLAN 2541
end
write
TAG MGNT VLAN to Uplink Port
configure terminal
interface gei_1/4/3 #(choose other interface if different)
no shutdown
hybrid-attribute copper
switchport mode hybrid
switchport vlan 2541 tag #Tag VLAN 2541
!
end