Best way to show my EV charger as its own feed

[bazcurtis]

Hi,

I hope this makes sense.

I have had a new EV charger installed. Previously my inverter CT Clamp was on the mains feed for the outside of the house. It was not of the house feed itself. This was because we have a heat pump and the inverter needed to see the heat pump load for it to use the batteries.

Now we have the EV we didn't want the inverter to see the EV charger. The Octopus engineer has now wired it in a way where we can still monitor both the heat pump and house with one CT clamp and it will work as before. This means the card won't see the EV charger (and the house batteries won't kick in when the car charges).

I will be adding a Shelly Pro to the EV feed so I can monitor that. What is the best way to show this on the card?

[bazcurtis]

I think I cracked it, but then had another issue. I used to have this view. It broke out the house from the heat pump and immersion

I now have this for the EV charger

If I change the addtional loads to three then the heat pump and the immersion disappear. What did I miss?

This is my YAML

type: custom:sunsynk-power-flow-card
cardstyle: full
wide: false
large_font: false
show_solar: true
show_battery: true
show_grid: true
center_no_grid: false
card_height: 100%
card_width: 100%
decimal_places: 2
decimal_places_energy: 1
dynamic_line_width: true
max_line_width: 4
min_line_width: 1
inverter:
  model: lux
  modern: false
  auto_scale: true
battery:
  energy: 19200
  shutdown_soc: 5
  show_daily: true
  invert_power: true
  colour: "#ffa500"
  auto_scale: true
  max_power: 3600
  show_remaining_energy: true
  charge_colour: "#008000"
  remaining_energy_to_shutdown: true
solar:
  colour: "#008000"
  show_daily: true
  mppts: 2
  display_mode: 2
  pv1_name: Front
  pv1_max_power: 3360
  pv2_name: Back
  pv2_max_power: 2520
  auto_scale: true
  dynamic_colour: true
  efficiency: 3
load:
  essential_name: House
  auto_scale: true
  show_aux: false
  show_daily: true
  dynamic_colour: true
  dynamic_icon: true
  additional_loads: 2
  load1_name: Heating
  load1_icon: mdi:heat-pump
  load2_name: Water
  load2_icon: mdi:water-thermometer
grid:
  colour: "#ff0000"
  dynamic_colour: true
  show_daily_buy: true
  show_daily_sell: true
  show_nonessential: true
  nonessential_name: EV
  nonessential_icon: mdi:ev-plug-type2
  invert_grid: true
  no_grid_colour: "#9e9e9e"
  auto_scale: true
  export_colour: "#008000"
  grid_off_colour: "#9e9e9e"
  label_daily_grid_sell: Export
  label_daily_grid_buy: Import
entities:
  day_pv_energy_108: sensor.lux_solar_output_daily
  inverter_voltage_154: sensor.lux_grid_voltage_live
  load_frequency_192: sensor.lux_grid_frequency_live
  inverter_current_164: none
  inverter_power_175: sensor.lux_battery_flow_live
  inverter_status_59: sensor.lux_status
  day_battery_charge_70: sensor.lux_battery_charge_daily
  day_battery_discharge_71: sensor.lux_battery_discharge_daily
  battery_voltage_183: sensor.lux_battery_voltage_live
  battery_soc_184: sensor.lux_battery
  battery_power_190: sensor.lux_battery_flow_live
  battery_current_191: none
  grid_power_169: sensor.grid_power
  day_grid_import_76: sensor.lux_power_from_grid_daily
  day_grid_export_77: sensor.lux_power_to_grid_daily
  grid_ct_power_172: sensor.lux_grid_flow_live
  day_load_energy_84: sensor.lux_home_consumption_daily
  essential_power: sensor.lux_home_consumption_live
  aux_power_166: null
  pv_total: sensor.lux_solar_output_live
  pv1_power_186: sensor.lux_solar_output_array_2_live