New DALY BMS (JST GH 1.25 mm 6pin connector) on DALY2MQTT (JST Mini Micro PH 2.0 6pin connector)

[BorgNumberOne]

Hi,

I have got a DALY2MQTT NG with a JST Mini Micro PH 2.0 6pin connector and I just would like to know If I simply can build an adapter cable from:
JST PH 2.0 mm 6pin to JST GH 1.25 mm 6pin to connect a new DALY BMS "16S48V150A" with JST GH 1.25 connectors.

The pinouts (from 1 to 6) seem to be the same on JST PH 2.0 and on JST GH 1.25 connectors, is not it?

[all-solutions]

Yes, the pin assignment is the same.

However, the new Daly BMS uses a new protocol. You also need to change the firmware from Daly2MQTT to 100Daly2MQTT. You can easily do this as an update via the existing firmware using the WebUI.

https://github.com/softwarecrash/100Daly2MQTT