Skip to content

Commit 1817796

Browse files
kylebonnicikylebonnici
committed
Formating: fix nit pick for comments
Add rule to linter to ensure that there is only one space after \* and only one space before */ Signed-off-by: Kyle Micallef Bonnici <[email protected]>
1 parent 73d18e8 commit 1817796

File tree

79 files changed

+425
-425
lines changed

Some content is hidden

Large Commits have some content hidden by default. Use the searchbox below for content that may be hidden.

79 files changed

+425
-425
lines changed

‎boards/adafruit/feather_esp32s2/adafruit_feather_esp32s2-pinctrl.dtsi‎

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -9,7 +9,7 @@
99
#include <zephyr/dt-bindings/pinctrl/esp32s2-gpio-sigmap.h>
1010

1111
&pinctrl {
12-
/* Debug TX (DBG) - This is the hardware UART debug pin */
12+
/* Debug TX (DBG) - This is the hardware UART debug pin */
1313
uart0_default: uart0_default {
1414
group1 {
1515
pinmux = <UART0_TX_GPIO43>;

‎boards/adafruit/feather_esp32s3_tft_reverse/adafruit_feather_esp32s3_tft_reverse-pinctrl.dtsi‎

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -11,7 +11,7 @@
1111
#include <zephyr/dt-bindings/pinctrl/esp32s3-gpio-sigmap.h>
1212

1313
&pinctrl {
14-
/* Debug TX (DBG) - This is the hardware UART debug pin */
14+
/* Debug TX (DBG) - This is the hardware UART debug pin */
1515
uart0_default: uart0_default {
1616
group1 {
1717
pinmux = <UART0_TX_GPIO43>;

‎boards/ambiq/apollo3_evb/apollo3_evb_connector.dtsi‎

Lines changed: 2 additions & 2 deletions
Original file line numberDiff line numberDiff line change
@@ -37,7 +37,7 @@
3737
<24 0 &gpio0_31 24 0>, /* MSPI0_SCK */
3838
<25 0 &gpio0_31 25 0>, /* IOM2_MISO_SCK, IOM2_I2C_SDA */
3939
<26 0 &gpio0_31 26 0>, /* MSPI0_D1 */
40-
<27 0 &gpio0_31 27 0>, /* IOM2_SPI_SCK, IOM2_I2C_SCL*/
40+
<27 0 &gpio0_31 27 0>, /* IOM2_SPI_SCK, IOM2_I2C_SCL */
4141
<28 0 &gpio0_31 28 0>, /* MSPI0_CE0 */
4242
<29 0 &gpio0_31 29 0>, /* IOM3_CS */
4343
<30 0 &gpio0_31 30 0>, /* LED1 */
@@ -52,7 +52,7 @@
5252
<39 0 &gpio32_63 7 0>, /* DISP_PWR_EN */
5353
<40 0 &gpio32_63 8 0>, /* IOM4_SPI_MISO, IOM4_I2C_SDA */
5454
<41 0 &gpio32_63 9 0>, /* SWO */
55-
<42 0 &gpio32_63 10 0>, /* IOM3_I2C_SCL */
55+
<42 0 &gpio32_63 10 0>, /* IOM3_I2C_SCL */
5656
<43 0 &gpio32_63 11 0>, /* IOM3_I2C_SDA */
5757
<44 0 &gpio32_63 12 0>, /* IOM4_SPI_MOSI */
5858
<45 0 &gpio32_63 13 0>, /* DISP_2V8_EN */

‎boards/ambiq/apollo3p_evb/apollo3p_evb_connector.dtsi‎

Lines changed: 2 additions & 2 deletions
Original file line numberDiff line numberDiff line change
@@ -37,7 +37,7 @@
3737
<24 0 &gpio0_31 24 0>, /* MSPI0_SCK */
3838
<25 0 &gpio0_31 25 0>, /* IOM2_MISO_SCK, IOM2_I2C_SDA */
3939
<26 0 &gpio0_31 26 0>, /* MSPI0_D1 */
40-
<27 0 &gpio0_31 27 0>, /* IOM2_SPI_SCK, IOM2_I2C_SCL*/
40+
<27 0 &gpio0_31 27 0>, /* IOM2_SPI_SCK, IOM2_I2C_SCL */
4141
<28 0 &gpio0_31 28 0>, /* MSPI0_CE0 */
4242
<29 0 &gpio0_31 29 0>, /* IOM3_CS */
4343
<30 0 &gpio0_31 30 0>, /* LED1 */
@@ -52,7 +52,7 @@
5252
<39 0 &gpio32_63 7 0>, /* DISP_PWR_EN */
5353
<40 0 &gpio32_63 8 0>, /* IOM4_SPI_MISO, IOM4_I2C_SDA */
5454
<41 0 &gpio32_63 9 0>, /* SWO */
55-
<42 0 &gpio32_63 10 0>, /* IOM3_I2C_SCL */
55+
<42 0 &gpio32_63 10 0>, /* IOM3_I2C_SCL */
5656
<43 0 &gpio32_63 11 0>, /* IOM3_I2C_SDA */
5757
<44 0 &gpio32_63 12 0>, /* IOM4_SPI_MOSI */
5858
<45 0 &gpio32_63 13 0>, /* DISP_2V8_EN */

‎boards/ambiq/apollo4p_evb/apollo4p_evb_connector.dtsi‎

Lines changed: 4 additions & 4 deletions
Original file line numberDiff line numberDiff line change
@@ -10,7 +10,7 @@
1010
#gpio-cells = <2>;
1111
gpio-map-mask = <0xffffffff 0xffffff80>;
1212
gpio-map-pass-thru = <0 0x7f>;
13-
gpio-map = <0 0 &gpio0_31 0 0>, /* IOS_SPI_SCK, IOS_I2C_SCL, MSPI2_CE0 */
13+
gpio-map = <0 0 &gpio0_31 0 0>, /* IOS_SPI_SCK, IOS_I2C_SCL, MSPI2_CE0 */
1414
<1 0 &gpio0_31 1 0>, /* IOS_SPI_MOSI, IOS_I2C_SDA, MSPI0_CE0 */
1515
<2 0 &gpio0_31 2 0>, /* IOS_SPI_MISO */
1616
<3 0 &gpio0_31 3 0>, /* IOS_CE */
@@ -52,7 +52,7 @@
5252
<39 0 &gpio32_63 7 0>, /* MSPI1_D2, X16SPI_D10 */
5353
<40 0 &gpio32_63 8 0>, /* MSPI1_D3, X16SPI_D11 */
5454
<41 0 &gpio32_63 9 0>, /* MSPI1_D4, X16SPI_D12 */
55-
<42 0 &gpio32_63 10 0>, /* MSPI1_D5, X16SPI_D13 */
55+
<42 0 &gpio32_63 10 0>, /* MSPI1_D5, X16SPI_D13 */
5656
<43 0 &gpio32_63 11 0>, /* MSPI1_D6, X16SPI_D14 */
5757
<44 0 &gpio32_63 12 0>, /* MSPI1_D7, X16SPI_D15 */
5858
<45 0 &gpio32_63 13 0>, /* MSPI1_SCK, X16SPI_DQS1DM1 */
@@ -93,15 +93,15 @@
9393
<80 0 &gpio64_95 16 0>, /* MSPI2_D6, SDIF_DAT5 */
9494
<81 0 &gpio64_95 17 0>, /* MSPI2_D7, SDIF_DAT6 */
9595
<82 0 &gpio64_95 18 0>, /* MSPI2_D8, SDIF_DAT7 */
96-
<83 0 &gpio64_95 19 0>, /* MSPI2_DQSDM, SDIF_CMD */
96+
<83 0 &gpio64_95 19 0>, /* MSPI2_DQSDM, SDIF_CMD */
9797
<84 0 &gpio64_95 20 0>, /* SDIF_DAT0 */
9898
<85 0 &gpio64_95 21 0>, /* IOM3_CS, SDIF_DAT1 */
9999
<86 0 &gpio64_95 22 0>, /* MSPI2_CE1, SDIF_DAT2 */
100100
<87 0 &gpio64_95 23 0>, /* SDIF_DAT3 */
101101
<88 0 &gpio64_95 24 0>, /* IOM7_CS, SDIF_CLKOUT */
102102
<89 0 &gpio64_95 25 0>, /* MSPI1_CE0, X16SPI_CE0, X16SPI_CE1 */
103103
<90 0 &gpio64_95 26 0>, /* LED0 */
104-
<91 0 &gpio64_95 27 0>, /* MSPI1_CE1, */
104+
<91 0 &gpio64_95 27 0>, /* MSPI1_CE1, */
105105
<92 0 &gpio64_95 28 0>, /* See am_hal_pins.h file for further info */
106106
<93 0 &gpio64_95 29 0>, /* See am_hal_pins.h file for further info */
107107
<94 0 &gpio64_95 30 0>, /* See am_hal_pins.h file for further info */

‎boards/arduino/mkrzero/arduino_mkr_connector.dtsi‎

Lines changed: 5 additions & 5 deletions
Original file line numberDiff line numberDiff line change
@@ -20,12 +20,12 @@
2020
<ARDUINO_MKR_HEADER_D6 0 &porta 20 0>, /* D6 */
2121
<ARDUINO_MKR_HEADER_D7 0 &porta 21 0>, /* D7 */
2222
<ARDUINO_MKR_HEADER_D8 0 &porta 16 0>, /* D8 / SPI-COPI */
23-
<ARDUINO_MKR_HEADER_D9 0 &porta 17 0>, /* D9 / SPI-SCK */
23+
<ARDUINO_MKR_HEADER_D9 0 &porta 17 0>, /* D9 / SPI-SCK */
2424
<ARDUINO_MKR_HEADER_D10 0 &porta 19 0>, /* D10 / SPI-CIPO */
25-
<ARDUINO_MKR_HEADER_D11 0 &porta 8 0>, /* D11 / I2C-SDA */
26-
<ARDUINO_MKR_HEADER_D12 0 &porta 9 0>, /* D12 / I2C-SCL */
27-
<ARDUINO_MKR_HEADER_D13 0 &portb 23 0>, /* D13 / UART-RX */
28-
<ARDUINO_MKR_HEADER_D14 0 &portb 22 0>, /* D14 / UART-TX */
25+
<ARDUINO_MKR_HEADER_D11 0 &porta 8 0>, /* D11 / I2C-SDA */
26+
<ARDUINO_MKR_HEADER_D12 0 &porta 9 0>, /* D12 / I2C-SCL */
27+
<ARDUINO_MKR_HEADER_D13 0 &portb 23 0>, /* D13 / UART-RX */
28+
<ARDUINO_MKR_HEADER_D14 0 &portb 22 0>, /* D14 / UART-TX */
2929
<ARDUINO_MKR_HEADER_A0 0 &porta 2 0>, /* D15 / A0 */
3030
<ARDUINO_MKR_HEADER_A1 0 &portb 2 0>, /* D16 / A1 */
3131
<ARDUINO_MKR_HEADER_A2 0 &portb 3 0>, /* D17 / A2 */

‎boards/arduino/portenta_c33/arduino_mkr_connector.dtsi‎

Lines changed: 5 additions & 5 deletions
Original file line numberDiff line numberDiff line change
@@ -20,12 +20,12 @@
2020
<ARDUINO_MKR_HEADER_D6 0 &ioport6 1 0>, /* D6 */
2121
<ARDUINO_MKR_HEADER_D7 0 &ioport4 2 0>, /* D7 */
2222
<ARDUINO_MKR_HEADER_D8 0 &ioport9 0 0>, /* D8 / SPI_COPI */
23-
<ARDUINO_MKR_HEADER_D9 0 &ioport2 4 0>, /* D9 / SPI_SCK */
23+
<ARDUINO_MKR_HEADER_D9 0 &ioport2 4 0>, /* D9 / SPI_SCK */
2424
<ARDUINO_MKR_HEADER_D10 0 &ioport3 15 0>, /* D10 / SPI_CIPO */
25-
<ARDUINO_MKR_HEADER_D11 0 &ioport4 7 0>, /* D11 / I2C_SDA */
26-
<ARDUINO_MKR_HEADER_D12 0 &ioport4 8 0>, /* D12 / I2C_SCL */
27-
<ARDUINO_MKR_HEADER_D13 0 &ioport1 10 0>, /* D13 / UART_RX */
28-
<ARDUINO_MKR_HEADER_D14 0 &ioport6 2 0>, /* D14 / UART_TX */
25+
<ARDUINO_MKR_HEADER_D11 0 &ioport4 7 0>, /* D11 / I2C_SDA */
26+
<ARDUINO_MKR_HEADER_D12 0 &ioport4 8 0>, /* D12 / I2C_SCL */
27+
<ARDUINO_MKR_HEADER_D13 0 &ioport1 10 0>, /* D13 / UART_RX */
28+
<ARDUINO_MKR_HEADER_D14 0 &ioport6 2 0>, /* D14 / UART_TX */
2929
<ARDUINO_MKR_HEADER_A0 0 &ioport0 6 0>, /* D15 / A0 */
3030
<ARDUINO_MKR_HEADER_A1 0 &ioport0 5 0>, /* D16 / A1 */
3131
<ARDUINO_MKR_HEADER_A2 0 &ioport0 4 0>, /* D17 / A2 */

‎boards/arduino/portenta_h7/arduino_portenta_h7-common.dtsi‎

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -144,7 +144,7 @@ zephyr_i2c: &i2c1 {
144144
status = "okay";
145145
mode-register = <0x220>;
146146

147-
/** From Arduino github repository:
147+
/* * From Arduino github repository:
148148
* RefreshRate = 64 ms / 8192 cyc = 7.8125 us/cyc
149149
* RefreshCycles = 7.8125 us * 90 MHz = 703
150150
* According to the formula on p.1665 of the reference manual,

‎boards/arduino/portenta_h7/arduino_portenta_h7_stm32h747xx_m7.dts‎

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -68,7 +68,7 @@
6868
status = "okay";
6969
};
7070

71-
/** The power supply for the Portenta H7 is based on a ST PSU reference design.
71+
/* * The power supply for the Portenta H7 is based on a ST PSU reference design.
7272
* The design specification from this reference design limits the maximum
7373
* clock speed to 400 MHz.
7474
* Refer: section 8.1 of the reference design guide.

‎boards/arduino/portenta_h7/arduino_portenta_h7_stm32h747xx_m7_1_0_0.overlay‎

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -1,4 +1,4 @@
1-
/**
1+
/* *
22
* Copyright (c) 2024 Rahul Arasikere <[email protected]>.
33
*
44
* SPDX-License-Identifier: Apache-2.0

0 commit comments

Comments
 (0)