Devicetree: Reformat after rebase

Rebase on main and reformat

Signed-off-by: Kyle Micallef Bonnici <[email protected]>

Author: kylebonnici

boards/beagle/pocketbeagle_2/pocketbeagle_2_am6232_m4-pinctrl.dtsi

@@ -26,9 +26,7 @@
 	};
 
 	main_uart0_pins_default: main-uart0-default-pins {
-		pinmux = <
-			K3_PINMUX(0x1c8, PIN_INPUT, MUX_MODE_0) /* (D14/A13) UART0_RXD */
-			K3_PINMUX(0x1cc, PIN_OUTPUT, MUX_MODE_0) /* (E14/E11) UART0_TXD */
-		>;
+		pinmux = <K3_PINMUX(0x1c8, PIN_INPUT, MUX_MODE_0)	/* (D14/A13) UART0_RXD */
+			  K3_PINMUX(0x1cc, PIN_OUTPUT, MUX_MODE_0)	/* (E14/E11) UART0_TXD */ >;
 	};
 };

boards/nxp/imx943_evk/imx943_evk-pinctrl.dtsi

@@ -147,8 +147,7 @@
 
 	flexio1_io5_default: flexio1_io5_default {
 		group0 {
-			pinmux =
-				<&iomuxc_gpio_io31_flexio_1_3_mux1_flexio5_flexio_1_3_mux1_flexio5>;
+			pinmux = <&iomuxc_gpio_io31_flexio_1_3_mux1_flexio5_flexio_1_3_mux1_flexio5>;
 			slew-rate = "slightly_fast";
 			drive-strength = "x4";
 		};

boards/renesas/ek_ra8d1/ek_ra8d1.dts

@@ -84,10 +84,10 @@
 		gpio-map-mask = <0xffffffff 0xffffffc0>;
 		gpio-map-pass-thru = <0 0x3f>;
 		gpio-map = <1 0 &ioport4 4 0>,	/* DISP_BLEN */
-			   <2 0 &ioport5 11 0>, /* IIC_SDA */
-			   <3 0 &ioport5 10 0>, /* DISP_INT */
-			   <4 0 &ioport5 12 0>, /* IIC_SCL */
-			   <6 0 &ioporta 1 0>;  /* DISP_RST */
+			   <2 0 &ioport5 11 0>,	/* IIC_SDA */
+			   <3 0 &ioport5 10 0>,	/* DISP_INT */
+			   <4 0 &ioport5 12 0>,	/* IIC_SCL */
+			   <6 0 &ioporta 1 0>;	/* DISP_RST */
 	};
 
 	aliases {