-
Notifications
You must be signed in to change notification settings - Fork 3
4.1.4 ti r9 with da830 evm audio
Rick edited this page Oct 2, 2015
·
1 revision
root@beaglebone:/home/debian# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.1.4-ti-r9 (root@b1-omap5-uevm-2gb) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP PREEMPT Tue Aug 11 00:31:44 UTC 2015
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: TI AM335x BeagleBone Black
[ 0.000000] cma: Reserved 24 MiB at 0x9e000000
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 130560
[ 0.000000] free_area_init_node: node 0, pgdat c0f8e700, node_mem_map df96d000
[ 0.000000] Normal zone: 1152 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 130560 pages, LIFO batch:31
[ 0.000000] CPU: All CPU(s) started in SVC mode.
[ 0.000000] AM335X ES2.1 (sgx neon )
[ 0.000000] PERCPU: Embedded 13 pages/cpu @df928000 s22336 r8192 d22720 u53248
[ 0.000000] pcpu-alloc: s22336 r8192 d22720 u53248 alloc=13*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129408
[ 0.000000] Kernel command line: console=ttyO0,115200n8 dyndbg="file drivers/of/base.c +pflm; file sound* +pflm; file *cape* +pflm" root=UUID=69f859b1-c308-41c9-8ca7-a3d0042031e8 ro rootfstype=ext4 rootwait fixrtc coherent_pool=1M quiet
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 470984K/522240K available (10710K kernel code, 924K rwdata, 3708K rodata, 684K init, 902K bss, 26680K reserved, 24576K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0e1cdf8 (14420 kB)
.init : 0xc0e1d000 - 0xc0ec8000 ( 684 kB)
.data : 0xc0ec8000 - 0xc0faf014 ( 925 kB)
.bss : 0xc0fb2000 - 0xc10938c0 ( 903 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[ 0.000017] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[ 0.000040] clocksource timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ 0.000054] OMAP clocksource: timer1 at 24000000 Hz
[ 0.000420] Console: colour dummy device 80x30
[ 0.000449] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[ 0.000457] This ensures that you still see kernel messages. Please
[ 0.000465] update your kernel commandline.
[ 0.000487] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
[ 0.088803] pid_max: default: 32768 minimum: 301
[ 0.088974] Security Framework initialized
[ 0.089060] AppArmor: AppArmor disabled by boot time parameter
[ 0.089070] Yama: becoming mindful.
[ 0.089304] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.089320] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090236] Initializing cgroup subsys blkio
[ 0.090266] Initializing cgroup subsys memory
[ 0.090315] Initializing cgroup subsys devices
[ 0.090335] Initializing cgroup subsys freezer
[ 0.090362] Initializing cgroup subsys net_cls
[ 0.090380] Initializing cgroup subsys perf_event
[ 0.090398] Initializing cgroup subsys net_prio
[ 0.090456] CPU: Testing write buffer coherency: ok
[ 0.090519] ftrace: allocating 34724 entries in 102 pages
[ 0.184293] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.184420] Setting up static identity map for 0x80008280 - 0x800082d8
[ 0.238884] Brought up 1 CPUs
[ 0.238912] SMP: Total of 1 processors activated (996.14 BogoMIPS).
[ 0.238921] CPU: All CPU(s) started in SVC mode.
[ 0.239844] devtmpfs: initialized
[ 0.257665] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 0.277671] omap_hwmod: tptc0 using broken dt data from edma
[ 0.277904] omap_hwmod: tptc1 using broken dt data from edma
[ 0.278112] omap_hwmod: tptc2 using broken dt data from edma
[ 0.284010] omap_hwmod: debugss: _wait_target_disable failed
[ 0.338786] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.340965] xor: measuring software checksum speed
[ 0.438901] arm4regs : 1219.600 MB/sec
[ 0.538829] 8regs : 1092.400 MB/sec
[ 0.638830] 32regs : 1090.000 MB/sec
[ 0.738830] neon : 1661.200 MB/sec
[ 0.738839] xor: using function: neon (1661.200 MB/sec)
[ 0.739015] pinctrl core: initialized pinctrl subsystem
[ 0.741071] NET: Registered protocol family 16
[ 0.744800] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.751047] OMAP GPIO hardware version 0.1
[ 0.762219] No ATAGs?
[ 0.762253] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.764176] omap4_sram_init:Unable to allocate sram needed to handle errata I688
[ 0.764196] omap4_sram_init:Unable to get sram pool needed to handle errata I688
[ 0.969091] raid6: int32x1 gen() 231 MB/s
[ 1.138887] raid6: int32x1 xor() 175 MB/s
[ 1.308980] raid6: int32x2 gen() 304 MB/s
[ 1.478961] raid6: int32x2 xor() 199 MB/s
[ 1.649000] raid6: int32x4 gen() 284 MB/s
[ 1.818909] raid6: int32x4 xor() 199 MB/s
[ 1.988911] raid6: int32x8 gen() 282 MB/s
[ 2.158967] raid6: int32x8 xor() 186 MB/s
[ 2.328852] raid6: neonx1 gen() 1462 MB/s
[ 2.498847] raid6: neonx2 gen() 1889 MB/s
[ 2.668829] raid6: neonx4 gen() 1921 MB/s
[ 2.838830] raid6: neonx8 gen() 811 MB/s
[ 2.838840] raid6: using algorithm neonx4 gen() 1921 MB/s
[ 2.838849] raid6: using intx1 recovery algorithm
[ 2.848390] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[ 2.851771] vgaarb: loaded
[ 2.852523] SCSI subsystem initialized
[ 2.852928] libata version 3.00 loaded.
[ 2.853303] usbcore: registered new interface driver usbfs
[ 2.853382] usbcore: registered new interface driver hub
[ 2.853492] usbcore: registered new device driver usb
[ 2.854105] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
[ 2.854164] omap_i2c 4819c000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring probe
[ 2.854314] pps_core: LinuxPPS API ver. 1 registered
[ 2.854323] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 2.854362] PTP clock support registered
[ 2.855145] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[ 2.855900] Advanced Linux Sound Architecture Driver Initialized.
[ 2.856736] NetLabel: Initializing
[ 2.856749] NetLabel: domain hash size = 128
[ 2.856757] NetLabel: protocols = UNLABELED CIPSOv4
[ 2.856824] NetLabel: unlabeled traffic allowed by default
[ 2.857168] Switched to clocksource timer1
[ 2.981589] NET: Registered protocol family 2
[ 2.982564] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 2.982620] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 2.982681] TCP: Hash tables configured (established 4096 bind 4096)
[ 2.982768] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 2.982793] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 2.983112] NET: Registered protocol family 1
[ 2.983721] RPC: Registered named UNIX socket transport module.
[ 2.983736] RPC: Registered udp transport module.
[ 2.983744] RPC: Registered tcp transport module.
[ 2.983751] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.983783] PCI: CLS 0 bytes, default 64
[ 2.984399] Unpacking initramfs...
[ 3.281668] Freeing initrd memory: 4316K (cfbc9000 - d0000000)
[ 3.282185] CPU PMU: Failed to parse /pmu/interrupt-affinity[0]
[ 3.282257] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[ 3.285049] futex hash table entries: 256 (order: 2, 16384 bytes)
[ 3.285181] audit: initializing netlink subsys (disabled)
[ 3.285293] audit: type=2000 audit(3.220:1): initialized
[ 3.286887] zpool: loaded
[ 3.287480] VFS: Disk quotas dquot_6.6.0
[ 3.287574] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.288397] NFS: Registering the id_resolver key type
[ 3.288471] Key type id_resolver registered
[ 3.288480] Key type id_legacy registered
[ 3.288507] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 3.288882] fuse init (API version 7.23)
[ 3.289163] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 3.292722] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 3.292984] io scheduler noop registered
[ 3.293002] io scheduler deadline registered
[ 3.293042] io scheduler cfq registered (default)
[ 3.294526] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 3.296725] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
[ 3.298372] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 3.301690] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 155, base_baud = 3000000) is a 8250
[ 3.309170] console [ttyS0] enabled
[ 3.310637] [drm] Initialized drm 1.1.0 20060810
[ 3.310760] usbcore: registered new interface driver udl
[ 3.311339] base:of_property_match_string:1398: comparing baseboard with baseboard
[ 3.316483] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 3.316576] usbcore: registered new interface driver pegasus
[ 3.316652] usbcore: registered new interface driver rtl8150
[ 3.316715] usbcore: registered new interface driver r8152
[ 3.318518] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.318560] ehci-pci: EHCI PCI platform driver
[ 3.318632] ehci-platform: EHCI generic platform driver
[ 3.318798] ehci-omap: OMAP-EHCI Host Controller driver
[ 3.320565] 47401300.usb-phy supply vcc not found, using dummy regulator
[ 3.349474] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 3.349497] musb-hdrc: MHDRC RTL version 2.0
[ 3.349508] musb-hdrc: setup fifo_mode 4
[ 3.349529] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 3.350961] 47401b00.usb-phy supply vcc not found, using dummy regulator
[ 3.409374] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 3.409396] musb-hdrc: MHDRC RTL version 2.0
[ 3.409406] musb-hdrc: setup fifo_mode 4
[ 3.409424] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 3.409589] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 3.409963] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[ 3.410271] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.410284] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.410295] usb usb1: Product: MUSB HDRC host driver
[ 3.410305] usb usb1: Manufacturer: Linux 4.1.4-ti-r9 musb-hcd
[ 3.410315] usb usb1: SerialNumber: musb-hdrc.1.auto
[ 3.411176] hub 1-0:1.0: USB hub found
[ 3.411241] hub 1-0:1.0: 1 port detected
[ 3.488190] mousedev: PS/2 mouse device common for all mice
[ 3.489139] omap_rtc 44e3e000.rtc: already running
[ 3.489639] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[ 3.490431] i2c /dev entries driver
[ 3.492021] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 3.493003] omap_hsmmc 48060000.mmc: Got CD GPIO
[ 3.578664] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.579026] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 3.584319] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 3.586323] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.588090] usbcore: registered new interface driver usbhid
[ 3.588105] usbhid: USB HID core driver
[ 3.589444] ashmem: initialized
[ 3.592417] remoteproc0: wkup_m3 is available
[ 3.592431] remoteproc0: Note: remoteproc is still under development and considered experimental.
[ 3.592440] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
[ 3.595316] snd_soc_core:snd_soc_register_codec:3064: snd-soc-dummy snd-soc-dummy: codec register snd-soc-dummy
[ 3.595368] snd_soc_core:snd_soc_register_dais:2590: snd-soc-dummy snd-soc-dummy: ASoC: dai register snd-soc-dummy #1
[ 3.595387] snd_soc_core:snd_soc_register_dais:2634: snd-soc-dummy snd-soc-dummy: ASoC: Registered DAI 'snd-soc-dummy-dai'
[ 3.595402] snd_soc_core:snd_soc_register_codec:3138: snd-soc-dummy snd-soc-dummy: ASoC: Registered codec 'snd-soc-dummy'
[ 3.595417] snd_soc_core:snd_soc_register_platform:2909: snd-soc-dummy snd-soc-dummy: ASoC: platform register snd-soc-dummy
[ 3.595435] snd_soc_core:snd_soc_add_platform:2892: snd-soc-dummy snd-soc-dummy: ASoC: Registered platform 'snd-soc-dummy'
[ 3.595960] oprofile: using arm/armv7
[ 3.596404] NET: Registered protocol family 10
[ 3.598306] mip6: Mobile IPv6
[ 3.598339] NET: Registered protocol family 17
[ 3.598494] Key type dns_resolver registered
[ 3.598510] mpls_gso: MPLS GSO support
[ 3.598833] omap_voltage_late_init: Voltage driver support not added
[ 3.605740] cpu cpu0: of_pm_voltdm_notifier_register: Failed to get cpu0 regulator/voltdm: -517
[ 3.605760] cpu cpu0: cpu0 clock notifier not ready, retry
[ 3.612071] ThumbEE CPU extension supported.
[ 3.612110] Registering SWP/SWPB emulation handler
[ 3.612302] PM: bootloader does not support rtc-only!
[ 3.613825] registered taskstats version 1
[ 3.614985] Btrfs loaded
[ 3.625387] mmc1: MAN_BKOPS_EN bit is not set
[ 3.630206] mmc1: new high speed MMC card at address 0001
[ 3.634982] mmcblk0: mmc1:0001 MMC04G 3.60 GiB
[ 3.635388] mmcblk0boot0: mmc1:0001 MMC04G partition 1 2.00 MiB
[ 3.635750] mmcblk0boot1: mmc1:0001 MMC04G partition 2 2.00 MiB
[ 3.637301] mmcblk0: p1
[ 3.645086] Key type encrypted registered
[ 3.676292] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ 3.676886] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 3.676943] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ 3.678984] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 3.679420] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 3.679825] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 3.680234] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ 3.680279] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
[ 3.681418] base:of_property_match_string:1398: comparing baseboard with baseboard
[ 3.681679] remoteproc0: powering up wkup_m3
[ 3.681701] remoteproc0: Booting fw image am335x-pm-firmware.elf, size 219663
[ 3.681969] remoteproc0: remote processor wkup_m3 is now up
[ 3.681994] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version 190 not supported
[ 3.687693] bone_capemgr bone_capemgr: Baseboard: 'A335BNLT,00C0,3214BBBK4221'
[ 3.687731] bone_capemgr bone_capemgr: compatible-baseboard=ti,beaglebone-black - #slots=4
[ 3.687768] base:of_property_match_string:1398: comparing slot0 with baseboard
[ 3.687779] base:of_property_match_string:1398: comparing slot0 with slot0
[ 3.747187] bone_capemgr bone_capemgr: slot #0: No cape found
[ 3.752985] base:of_property_match_string:1398: comparing slot1 with baseboard
[ 3.752996] base:of_property_match_string:1398: comparing slot1 with slot0
[ 3.753006] base:of_property_match_string:1398: comparing slot1 with slot1
[ 3.807189] bone_capemgr bone_capemgr: slot #1: No cape found
[ 3.812978] base:of_property_match_string:1398: comparing slot2 with baseboard
[ 3.812989] base:of_property_match_string:1398: comparing slot2 with slot0
[ 3.812999] base:of_property_match_string:1398: comparing slot2 with slot1
[ 3.813009] base:of_property_match_string:1398: comparing slot2 with slot2
[ 3.827196] usb 1-1: new high-speed USB device number 2 using musb-hdrc
[ 3.867180] bone_capemgr bone_capemgr: slot #2: No cape found
[ 3.872977] base:of_property_match_string:1398: comparing slot3 with baseboard
[ 3.872988] base:of_property_match_string:1398: comparing slot3 with slot0
[ 3.872998] base:of_property_match_string:1398: comparing slot3 with slot1
[ 3.873008] base:of_property_match_string:1398: comparing slot3 with slot2
[ 3.873018] base:of_property_match_string:1398: comparing slot3 with slot3
[ 3.897079] bone_capemgr bone_capemgr: Invalid signature 'ffffffff' at slot 3
[ 3.904287] bone_capemgr bone_capemgr: slot #3: No cape found
[ 3.910183] bone_capemgr bone_capemgr: initialized OK.
[ 3.910860] cpu cpu0: of_pm_voltdm_notifier_register: Fail calculating voltage latency[950000<->1325000]:-22
[ 3.911347] cpu cpu0: of_pm_voltdm_notifier_register: Fail calculating voltage latency[950000<->1325000]:-22
[ 3.967232] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 3.967256] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ 3.967794] davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe]
[ 3.967830] davinci_mdio: dt: updated phy_id[1] from phy_mask[fffffffe]
[ 3.969041] usb 1-1: New USB device found, idVendor=0bda, idProduct=8176
[ 3.969062] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.969073] usb 1-1: Product: 802.11n WLAN Adapter
[ 3.969083] usb 1-1: Manufacturer: Realtek
[ 3.969093] usb 1-1: SerialNumber: 00e04c000001
[ 3.976203] libphy: 4a101000.mdio: probed
[ 3.976237] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ 3.977428] cpsw 4a100000.ethernet: Detected MACID = 6c:ec:eb:5c:4d:a5
[ 3.977483] base:of_property_match_string:1398: comparing fck with fck
[ 3.979322] omap_rtc 44e3e000.rtc: setting system clock to 2015-10-02 09:21:22 UTC (1443777682)
[ 3.979355] of_cfs_init
[ 3.979499] of_cfs_init: OK
[ 3.985499] PM: Hibernation image not present or could not be loaded.
[ 3.985660] ALSA device list:
[ 3.985670] No soundcards found.
[ 3.987145] Freeing unused kernel memory: 684K (c0e1d000 - c0ec8000)
[ 4.078746] systemd-udevd[107]: starting version 215
[ 4.081117] random: systemd-udevd urandom read with 10 bits of entropy available
[ 4.928201] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.562814] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 5.807916] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro
[ 6.425305] systemd-udevd[188]: starting version 215
[ 6.756966] systemd-journald[185]: Received request to flush runtime journal from PID 1
[ 7.659040] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20
[ 7.895442] cfg80211: Calling CRDA to update world regulatory domain
[ 8.180500] rtl8192cu: Chip version 0x10
[ 8.361293] random: nonblocking pool is initialized
[ 8.384911] rtl8192cu: MAC address: 00:13:ef:c0:0b:5c
[ 8.384963] rtl8192cu: Board Type 0
[ 8.385074] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1
[ 8.385231] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin
[ 8.387332] usb 1-1: Direct firmware load for rtlwifi/rtl8192cufw_TMSC.bin failed with error -2
[ 8.387407] usb 1-1: Direct firmware load for rtlwifi/rtl8192cufw.bin failed with error -2
[ 8.387421] rtlwifi: Loading alternative firmware rtlwifi/rtl8192cufw.bin
[ 8.387429] rtlwifi: Firmware rtlwifi/rtl8192cufw_TMSC.bin not available
[ 8.442095] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 8.445124] usbcore: registered new interface driver rtl8192cu
[ 8.476294] cfg80211: World regulatory domain updated:
[ 8.476329] cfg80211: DFS Master region: unset
[ 8.476340] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 8.476355] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 8.476366] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 8.476376] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 8.476389] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 8.476401] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 8.476412] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 8.476422] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 8.476432] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 8.970482] net eth0: initializing cpsw version 1.12 (0)
[ 8.972899] net eth0: phy found : id is : 0x7c0f1
[ 8.973007] libphy: PHY 4a101000.mdio:01 not found
[ 8.980576] net eth0: phy 4a101000.mdio:01 not found on slave 1
[ 8.992184] base:of_property_match_string:1398: comparing cpts with fck
[ 8.992213] base:of_property_match_string:1398: comparing cpts with cpts
[ 8.992305] net eth0: BQL enabled
[ 8.996443] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.047899] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
[ 12.047983] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.851102] using random self ethernet address
[ 18.851133] using random host ethernet address
[ 18.851150] using host ethernet address: 6C:EC:EB:5C:4D:A7
[ 18.851161] using self ethernet address: 6C:EC:EB:5C:4D:A0
[ 18.852689] usb0: HOST MAC 6c:ec:eb:5c:4d:a7
[ 18.853127] usb0: MAC 6c:ec:eb:5c:4d:a0
[ 18.853191] using random self ethernet address
[ 18.853204] using random host ethernet address
[ 18.853299] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[ 18.853312] g_ether gadget: g_ether ready
[ 22.004999] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[ 105.220736] bone_capemgr bone_capemgr: part_number 'BB-ENABLE-PRU', version 'N/A'
[ 105.220782] bone_capemgr bone_capemgr: slot #4: override
[ 105.220800] bone_capemgr bone_capemgr: Using override eeprom data at slot 4
[ 105.220817] bone_capemgr bone_capemgr: slot #4: 'Override Board Name,00A0,Override Manuf,BB-ENABLE-PRU'
[ 105.220950] bone_capemgr:capemgr_load_slot:1148: bone_capemgr bone_capemgr: slot #4: Requesting part number/version based 'BB-ENABLE-PRU-00A0.dtbo
[ 105.220971] bone_capemgr:capemgr_load_slot:1162: bone_capemgr bone_capemgr: slot #4: Requesting firmware 'BB-ENABLE-PRU-00A0.dtbo' for board-name 'Override Board Name', version '00A0'
[ 105.222176] bone_capemgr:capemgr_load_slot:1171: bone_capemgr bone_capemgr: slot #4: dtbo 'BB-ENABLE-PRU-00A0.dtbo' loaded; converting to live tree
[ 105.236406] gpio-of-helper ocp:gpio_helper: ready
[ 105.249423] pruss_uio 4a300000.pruss: pins are not configured from the driver
[ 105.260308] bone_capemgr bone_capemgr: slot #4: dtbo 'BB-ENABLE-PRU-00A0.dtbo' loaded; overlay id #0
[ 105.305823] snd_soc_core:soc_bind_dai_link:938: davinci_evm sound: ASoC: binding TLV320AIC3X at idx 0
[ 105.305859] davinci_evm sound: ASoC: CPU DAI (null) not registered
[ 105.319367] base:of_property_match_string:1398: comparing tx with tx
[ 105.319419] base:of_property_match_string:1398: comparing rx with tx
[ 105.319430] base:of_property_match_string:1398: comparing rx with rx
[ 105.319483] base:of_property_match_string:1398: comparing common with tx
[ 105.319495] base:of_property_match_string:1398: comparing common with rx
[ 105.319507] base:of_property_match_string:1398: comparing rx with tx
[ 105.319518] base:of_property_match_string:1398: comparing rx with rx
[ 105.340089] base:of_property_match_string:1398: comparing tx with tx
[ 105.340846] snd_soc_core:snd_soc_register_codec:3064: tlv320aic3x-codec 2-0018: codec register 2-0018
[ 105.340890] snd_soc_core:snd_soc_register_dais:2590: tlv320aic3x-codec 2-0018: ASoC: dai register 2-0018 #1
[ 105.340907] snd_soc_core:snd_soc_register_dais:2634: tlv320aic3x-codec 2-0018: ASoC: Registered DAI 'tlv320aic3x-hifi'
[ 105.345160] snd_soc_core:snd_soc_register_dais:2590: davinci-mcasp 48038000.mcasp: ASoC: dai register 48038000.mcasp #1
[ 105.345193] snd_soc_core:snd_soc_register_dais:2634: davinci-mcasp 48038000.mcasp: ASoC: Registered DAI '48038000.mcasp'
[ 105.359985] snd_soc_core:snd_soc_register_codec:3138: tlv320aic3x-codec 2-0018: ASoC: Registered codec 'tlv320aic3x-codec.2-0018'
[ 105.360257] snd_soc_core:snd_soc_add_platform:2892: davinci-mcasp 48038000.mcasp: ASoC: Registered platform '48038000.mcasp'
[ 105.361925] davinci_evm sound: snd_soc_register_card failed (-517)
[ 105.403122] snd_soc_core:soc_bind_dai_link:938: davinci_evm sound: ASoC: binding TLV320AIC3X at idx 0
[ 105.403471] snd_soc_core:snd_soc_dapm_new_dai_widgets:3494: tlv320aic3x-codec 2-0018: ASoC: adding Playback widget
[ 105.403492] snd_soc_core:snd_soc_dapm_new_dai_widgets:3513: tlv320aic3x-codec 2-0018: ASoC: adding Capture widget
[ 105.404041] snd_soc_core:soc_probe_link_dais:1334: davinci_evm sound: ASoC: probe Podtique DaVinci EVM dai link 0 late -2
[ 105.404061] snd_soc_core:soc_probe_link_dais:1334: davinci_evm sound: ASoC: probe Podtique DaVinci EVM dai link 0 late -1
[ 105.404075] snd_soc_core:soc_probe_link_dais:1334: davinci_evm sound: ASoC: probe Podtique DaVinci EVM dai link 0 late 0
[ 105.404089] snd_soc_core:soc_probe_link_dais:1334: davinci_evm sound: ASoC: probe Podtique DaVinci EVM dai link 0 late 1
[ 105.404103] snd_soc_core:soc_probe_link_dais:1334: davinci_evm sound: ASoC: probe Podtique DaVinci EVM dai link 0 late 2
[ 105.404143] davinci_evm sound: ASoC: DAPM unknown pin MONO_LOUT
[ 105.424038] snd_soc_core:soc_new_pcm:2510: davinci_evm sound: ASoC: registered pcm #0 AIC3X tlv320aic3x-hifi-0
[ 105.427387] davinci_evm sound: tlv320aic3x-hifi <-> 48038000.mcasp mapping ok
[ 105.427436] snd_soc_core:snd_soc_dapm_link_dai_widgets:3570: tlv320aic3x-codec 2-0018: Right ADC -> Capture
[ 105.427457] snd_soc_core:snd_soc_dapm_link_dai_widgets:3570: tlv320aic3x-codec 2-0018: Left ADC -> Capture
[ 105.427478] snd_soc_core:snd_soc_dapm_link_dai_widgets:3570: tlv320aic3x-codec 2-0018: Playback -> Right DAC
[ 105.427493] snd_soc_core:snd_soc_dapm_link_dai_widgets:3570: tlv320aic3x-codec 2-0018: Playback -> Left DAC