0.17.10

What's Changed

• Add extra i2c_examples by @Grazfather in #1051

Full Changelog: 0.17.9...0.17.10

0.17.9

What's Changed

• Fix clock driver by @Grazfather in #1050
• core: Bring back stack traces by @tact1m4n3 in #1053

Full Changelog: 0.17.8...0.17.9

0.17.8

What's Changed

• Release at most once per day by @mattnite in #1054

Full Changelog: 0.17.7...0.17.8

0.17.7

What's Changed

• drivers: ICM_20948: Support disabling logging by @Grazfather in #1049

Full Changelog: 0.17.6...0.17.7

0.17.6

What's Changed

• nrf5x: fix nrf52833 UART pin mapping by @lubitelpospat in #1039

Full Changelog: 0.17.5...0.17.6

0.17.5

What's Changed

• ch32vxxx: i2c/spi: Support board defaults and Setup.apply flows by @Grazfather in #1033

Full Changelog: 0.17.4...0.17.5

0.17.4

What's Changed

• Trim identifier escape in dep names for releaser by @mattnite in #1048

Full Changelog: 0.17.3...0.17.4

0.17.3

What's Changed

• drivers: cyww43439: Fix gpio_put being unable to write a 0 by @Grazfather in #1036

Full Changelog: 0.17.2...0.17.3

0.17.2

What's Changed

• esp: RTOS optimizations by @tact1m4n3 in #898
• esp: Cleanup unused imports and declarations by @tact1m4n3 in #905
• website: fix typo by @tact1m4n3 in #904
• ESP: lwIP fixes by @andreacoradi in #908
• Regz: Fix embassy stride > 4 by @mathk in #906
• rp2xxx: Build usb examples on rp2350 feather by @Grazfather in #909
• Add missing modules and tools to releases by @tact1m4n3 in #913
• Add zig-pkg to .gitignore by @rito1998 in #911
• rp2xxx: Unique board identifier by @ianic in #910
• feat: add support for DFU and DfuSe tooling by @rbino in #915
• rp2xxx: fix timer interrupt enable by @ianic in #912
• esp: RTOS work by @tact1m4n3 in #907
• esp: Fix spi integer overflow panic by @tact1m4n3 in #917
• freertos: idiomatic Zig wrappers for the FreeRTOS module by @d-mironov in #920
• ST77xx LCD driver by @arkadiuszwojcik in #926
• stm32: fix systick get_time_since_boot() bad value due to non-atomic memory read by @mihainicolae80 in #925
• Add foundation-libc inttypes header content by @arkadiuszwojcik in #927
• mlx90640 image support and example by @cswank in #918
• fix spi for esp by @mappoTrell in #941
• Pin zigimports to 0.15.2 friendly version by @mattnite in #948
• Update getting started page to include Pico2 info by @arkadiuszwojcik in #929
• Turn off Sorcerer in CI for now by @mattnite in #950
• regz - fix access null value by @SayCV in #867
• Add configurable header to FreeRTOS module by @arkadiuszwojcik in #931
• rp2xxx: Add flash support on RP2350 by @tact1m4n3 in #934
• rp2xxx: pins.zig: Refactor code to use less eval branch quota by @tact1m4n3 in #940
• Bug fix in RP2xxx fifo level readback by @Kytezign in #930
• update stm32 clock configs by @RecursiveError in #935
• Fix USB bus reset handling and add some debug logging (Issue #928) by @Uthedris in #933
• Add ATtiny port with avr25 CPU support and fix AVR vector tables by @mattnite in #923
• core: make the user's main.zig the executable root by @mattnite in #937
• rp2xxx: Fix Adafruit boards by @Grazfather in #960
• rp2xxx fixes by @Grazfather in #959
• nrf5x: Add nice!nano board by @kotokrad in #963
• Regz: Fix padding in inline nested structs by @Grazfather in #967
• Zig 0.17.0 master by @mattnite in #954
• nrf5x: USBD implementation and examples by @kotokrad in #965
• Set working directory for linter by @mattnite in #971
• Fix zig unused imports check by @mattnite in #973
• new port: MSPM0 by @piotrfila in #972
• Update zine by @mattnite in #970
• An attempt at mostly complete avr support by @philocalyst in #947
• AS5600: add missing try to read2_raw() calls by @Grazfather in #976
• MPU_6050: add timeout to device reset polling loop by @Grazfather in #977
• fix(utilities): fix CircularBuffer read/write using u8 instead of genric T by @by965738071 in #982
• regz: Move VirtualFilesystem into /modules by @piotrfila in #983
• fix bInterval for usb-hs, units are different between fs and hs by @Copper280z in #991
• Fix UART on rp2xxx by @pcolladosoto in #993
• wch/ch32: Fix WFE by @Grazfather in #989
• ch32 USBHD/USBHS driver implementation by @Copper280z in #893
• linter: update Ast.parse call for Zig 0.17 API by @by965738071 in #998
• dfu: adapt to 0.17 API (CRC-32/JAMCRC rename) by @by965738071 in #999
• Cortex-M: add compiler fences to interrupt enable/disable asm by @Grazfather with @Copilot in #1002
• uf2: adapt to 0.17 API, add file tracking support by @by965738071 in #994
• chore: update to zig 0.17.0-dev.1454+5faa79730 by @nihklas in #996
• Fix spelling of separate in gpio comment by @latent-9 in #1010
• Update CI so it's not red all the time by @mattnite in #1009
• Update checkout action again by @mattnite in #1011
• compile object doesn't support addObjectFile anymore need to refrence the root_module by @Kytezign in #1007
• cortex m0+: Fix bug doing read modify write on set only registers by @Kytezign in #1006
• fix(wifi) wifi scan example fix by @arkadiuszwojcik in #1004
• Turn on avr by @mattnite in #1012
• board-specific uart and other config by @Grazfather in #997
• rp2xxx: fixed bug in get_pwm by @Kytezign in #1014
• Make UARTs adhere to the std.Io.Reader interface by @pcolladosoto in #1008
• Add missing root module dependencies by @piotrfila in #1000
• Sync Zine with same version of Zig as MicroZig by @mattnite in #1013
• Sycl badge improvements by @mattnite in #1020
• Update to Zig 0.17.0-dev.1936+5a625d5f3 by @mattnite in #1022
• feat: support timeouts and deadlines by @pcolladosoto in #1018
• esp: Fix startup crash and more by @tact1m4n3 in #1026
• Add check for Zig version in documentation by @mattnite in #1028
• ch32v: Revamp the board-level usart setup design by @Grazfather in #1021
• Drop iconv from libxml2 options by @mattnite in #1031
• Fix lint action (readme-version) by @Grazfather in #1034
• nrf52x: Fix various issues with gpios by @Grazfather in #1035
• nrf5x: fix micro:bit v2 display COL4 pin by @lubitelpospat in #1037
• Port boxzer to MicroZig as a release tool by @mattnite in #1038
• Auto microzig releases by @mattnite in #1040
• Fix auto release by @mattnite in #1041
• Add a bot for auto releases by @mattnite in #1042
• Fix bump by @mattnite in #1043
• try fixing again by @mattnite in #1044
• format by @mattnite in #1045
• Try push fix by @mattnite in #1047

New Contributors

• @rito1998 made their first contribution in #911
• @d-mironov made their first contribution in #920
• @mihainicolae80 made their first contribution in #925
• @mappoTrell made their first contribution in #941
• @SayCV made their first contribution in #867
• @kotokrad made their first contribution in...

0.15.1

What's Changed

• nrf52: Add basic clocks hal by @Grazfather in #666
• rp2xxx: fix incorrect parameter in define name comparison by @wordandahalf in #671
• Fix incorrect calculation for get_readable_len in CircularBuffer by @luke-thom in #678
• esp: Add app description by @tact1m4n3 in #674
• esp: LEDC and refactoring by @tact1m4n3 in #676
• rp2xxx: Add system timer hal by @tact1m4n3 in #673
• Update RTT to new std.Io interfaces by @haydenridd in #675
• Remove Leftover Debug Logging by @haydenridd in #686
• nrf52: Add rtt example by @Grazfather in #689
• Aviron: Fix a few instructions by @Grazfather in #688
• fix(esp32-c3): fix typo "Defalut" by @CorruptedVor in #685
• STM32F1 Time Driver by @RecursiveError in #681
• uf2: Refactor and Archive.read_from by @tact1m4n3 in #690
• rp2xxx: Remove redundant flashless board file for pico by @tact1m4n3 in #691
• Migrate boxzer and dependencies by @mattnite in #695
• Try to fix local server by @mattnite in #696
• CircularBuffer fn get_readable_len did not account for full case by @Kytezign in #697
• Update cdc.zig with line state tracking by @Kytezign in #698
• Ensure RP2040 tx buffer control is respected by @Kytezign in #699
• Aviron: Add breakpoint, set gas, detect infinite loop by @Grazfather in #703
• rp2xxx: Implement flashless flash hal by @tact1m4n3 in #705
• RP2040 ADC handle the 500Khz sampling case by @Kytezign in #706
• rp2040 pio: Fix absolute addressing of jmp and wrap by @Kytezign in #700
• update Stream_Device IO and STM32 uart by @RecursiveError in #702
• adding some polish by @aaronhmiller in #709
• Unify interface, add memory mapping by @Grazfather in #704
• Fix semihosting writer by @Grazfather in #692
• Moved scripts out of rpi examples folder by @haydenridd in #711
• nrf5x: i2cdma: Don't return TargetAddressReserved by @Grazfather in #712
• Rework DMA in STM32F1 hal by @RecursiveError in #708
• Aviron: cleanup names and fix avr-gcc test by @Grazfather in #714
• Aviron: Dump regs and sram if trace is set by @Grazfather in #715
• Aviron: Support multiple MCUs by @Grazfather in #683
• "Regz Wizard" -> Sorcerer by @mattnite in #716
• Aviron: Add tests for load instructions by @Grazfather in #718
• Aviron: Make test elf builds deterministics by @Grazfather in #719
• Aviron: Return errors on memory/flash access error and instruction decode by @Grazfather in #720
• Aviron: Fix IO ranges for MCUs and explain in comments by @Grazfather in #723
• Update/cortex m7 support by @brbrr in #721
• Add Support for Multiple CDC Drivers by @eugenepentland in #722
• Drivers: AS5600 position sensor by @Grazfather in #713
• Added GPIO IRQ RP2040/RP3050 by @Kytezign in #725
• Aviron: Fix SBIW instruction setting SREG incorrectly by @Grazfather in #724
• rp2xxx: Enable fpu and dcp in core 1 entrypoint by @tact1m4n3 in #726
• Interrupt and multicore safe allocator by @Uthedris in #469
• Fixes for RP2xxx SPI Device and ESP32-C3 build error by @tact1m4n3 in #732
• rp2xxx: ssd1306 oled display example by @Gnyblast in #646
• rp2xxx: Use deadline for UART by @Grazfather in #731
• Add more verbose panic handler for Debug builds by @Grazfather in #733
• Add better fault handling for ARM targets by @ikskuh in #633
• rp2xxx: Update readme to describe boot process and flashless targets by @Grazfather in #734
• rp2xxx: Cleanup linker scripts by @tact1m4n3 in #735
• rp2xxx: PIO: Fix sideset having no way to account for optional bit by @Grazfather in #736
• refactor "generate_vector_table" and update affected examples by @RecursiveError in #738
• ch32v: Add time keeping via systick by @Grazfather in #742
• Better HAL for STM32F303 by @mathk in #729
• Improve I2C device compatibility for STM32F303 by @mathk in #745
• Add HTS221 sensor driver (temperature only) by @mathk in #746
• STDM32F303: I2C: Fix typos and use names more similar to rp2xxx HAL by @Grazfather in #748
• stm32f303: examples: hts221: Fix by @Grazfather in #751
• ch32v: Improve timekeeping by @Grazfather in #752
• ch32v: Define structs for CSRs by @Grazfather in #753
• Add HAL for the STM32L47X and move peripherals to common folder by @mathk in #747
• cortex_m: Enable fpu on startup by @tact1m4n3 in #749
• Adding humidity retrival for the HTS221 sensor by @mathk in #756
• rtt: Export RttControlBlock by @tact1m4n3 in #758
• regz: Standard format for chip properties by @tact1m4n3 in #757
• esp: fix I2C writes by @andreacoradi in #750
• esp32c3: Fix alignment of ram text by @Grazfather in #759
• ch32v: Improve timekeeping by @Grazfather in #761
• Fix STM32 example compilation issue by @mathk in #763
• ch32v: Add get_freqs, USART hal by @Grazfather in #762
• Add support for the STM32L476G discovery board and basic LCD support by @mathk in #755
• ch32v: Improve clock configuration by @Grazfather in #767
• esp32c3: correctly use END or STOP for I2C reads and writes by @andreacoradi in #764
• Add dsp extension to rp2350 (arm) by @piotrfila in #769
• Rework USB driver by @piotrfila in #760
• Flash driver interface by @Copper280z in #589
• feat: add ds18b20 driver by @kaans in #754
• Add systick low level abstraction and add clock device for stm32 by @mathk in #768
• Added a few helper APIs for the RP2040 pwm by @Kytezign in #771
• Make dump args a path to allow generating file at the same time by @mathk in #772
• Don't distinguish between Regz generated code for "standalone" by @mattnite in #773
• Make STM32 HAL and board more align and push more peripheral to common by @mathk in #770
• Set register and bitfield defaults to reset values by @mattnite in #774
• Make public app declarations available from root by @mattnite in #775
• Flush the linter by @mattnite in https://github.com/ZigEmbeddedGroup/microzi...