config: kernel: linux-k3-beagle: Enable M4 remoteporc

[Ayush1325]

• PocketBeagle 2 and BeaglePlay requires this driver.
• The M4 core supports ZephyrRTOS and FreeRTOS along with bare-metal.

[coderabbitai]

Walkthrough

The configuration files for the Linux kernel targeting the K3 Beagle and K3 Beagle Edge platforms were updated. In both files, the option CONFIG_TI_K3_M4_REMOTEPROC=m was added, enabling support for the TI K3 M4 remote processor as a loadable kernel module. No other configuration changes were made, and no public or exported entities were altered.

Suggested labels

08, Needs review, size/small, Hardware

Suggested reviewers

• Grippy98
• igorpecovnik
• EvilOlaf

---

📜 Recent review details

Configuration used: CodeRabbit UI
Review profile: CHILL
Plan: Pro

📥 Commits

Reviewing files that changed from the base of the PR and between 1b2428e and f3d8a48.

📒 Files selected for processing (2)

• config/kernel/linux-k3-beagle-current.config (1 hunks)
• config/kernel/linux-k3-beagle-edge.config (1 hunks)

🧰 Additional context used

🧠 Learnings (3)

📓 Common learnings

Learnt from: EvilOlaf
PR: armbian/build#8328
File: lib/functions/compilation/patch/drivers_network.sh:542-545
Timestamp: 2025-06-24T10:08:40.313Z
Learning: In the Armbian build system, when a PR removes build support for a specific kernel version, version check issues for that removed version become practically irrelevant even if they appear incorrect in isolation. Context about which kernel versions are being deprecated/removed is important for understanding the impact of version-related code changes.

Learnt from: rpardini
PR: armbian/build#8044
File: patch/u-boot/v2025.04/cmd-fileenv-read-string-from-file-into-env.patch:76-86
Timestamp: 2025-03-31T22:20:48.475Z
Learning: For the Armbian build project, maintaining consistency with existing patches across U-Boot versions (such as between 2025.01 and 2025.04) is prioritized over refactoring individual patches for code improvements.

Learnt from: pyavitz
PR: armbian/build#8361
File: config/kernel/linux-sunxi64-edge.config:594-597
Timestamp: 2025-07-06T16:27:45.349Z
Learning: In Armbian sunxi64-edge kernel configurations, PCI/PCIe support may be enabled for future-proofing purposes to support upcoming Allwinner SoCs like the T536 that include PCIe Gen2 interfaces, even if current primary targets like H616 lack PCIe controllers. This forward-looking approach prepares the configuration for next-generation hardware in the same SoC family.

Learnt from: libiunc
PR: armbian/build#8033
File: config/kernel/linux-starfive2-vendor.config:43-43
Timestamp: 2025-03-31T12:57:13.880Z
Learning: For StarFive2 platform kernel configurations, maintain alignment with vendor-provided configurations rather than modifying security settings like SECCOMP. This ensures hardware compatibility as intended by the manufacturer.

Learnt from: EvilOlaf
PR: armbian/build#8330
File: config/sources/families/sun55iw3.conf:32-36
Timestamp: 2025-06-25T03:42:09.086Z
Learning: In Armbian build system configuration files like config/sources/families/*.conf, KERNELSOURCE is explicitly declared when using unofficial or 3rd party kernel repositories (like the "dev" branch using https://github.com/apritzel/linux), but can be omitted when using the standard mainline kernel (like the "edge" branch) since it will fall back to the default mainline source.

Learnt from: EvilOlaf
PR: armbian/build#0
File: :0-0
Timestamp: 2025-06-16T03:24:00.458Z
Learning: In Armbian board configuration files (.csc), the standard pattern is to have only one line as a comment describing the board hardware specifications. This single-line description typically includes the SoC model, core count, RAM options, and key features like connectivity options, storage interfaces, and special features.

Learnt from: EvilOlaf
PR: armbian/build#8330
File: config/sources/families/sun55iw3.conf:32-36
Timestamp: 2025-06-25T03:40:52.109Z
Learning: In Armbian build system configuration files like config/sources/families/*.conf, when KERNELSOURCE is not explicitly declared in a case branch, the system falls back to a default KERNELSOURCE value, so missing KERNELSOURCE declarations are not critical issues.

Learnt from: Grippy98
PR: armbian/build#8152
File: lib/functions/configuration/interactive.sh:209-266
Timestamp: 2025-05-05T12:35:07.143Z
Learning: For the interactive kernel selection in Armbian, KERNEL_MAJOR_MINOR and KERNEL_DESCRIPTION are parsed from family.conf but deliberately not set as environment variables to avoid potential interference with other parts of the build system.

Learnt from: djurny
PR: armbian/build#8166
File: config/bootscripts/boot-mvebu.cmd:38-50
Timestamp: 2025-05-07T20:49:40.969Z
Learning: The 4KB (0x1000) boundary used for device tree size calculations in U-Boot scripts is specific to how the `fdt resize` command works internally and should remain hardcoded rather than being tied to adjustable alignment variables.

config/kernel/linux-k3-beagle-current.config (4)

Learnt from: libiunc
PR: armbian/build#8033
File: config/kernel/linux-starfive2-vendor.config:43-43
Timestamp: 2025-03-31T12:57:13.880Z
Learning: For StarFive2 platform kernel configurations, maintain alignment with vendor-provided configurations rather than modifying security settings like SECCOMP. This ensures hardware compatibility as intended by the manufacturer.

Learnt from: EvilOlaf
PR: armbian/build#8330
File: config/sources/families/sun55iw3.conf:32-36
Timestamp: 2025-06-25T03:42:09.086Z
Learning: In Armbian build system configuration files like config/sources/families/*.conf, KERNELSOURCE is explicitly declared when using unofficial or 3rd party kernel repositories (like the "dev" branch using https://github.com/apritzel/linux), but can be omitted when using the standard mainline kernel (like the "edge" branch) since it will fall back to the default mainline source.

Learnt from: EvilOlaf
PR: armbian/build#0
File: :0-0
Timestamp: 2025-06-16T03:24:00.458Z
Learning: In Armbian board configuration files (.csc), the standard pattern is to have only one line as a comment describing the board hardware specifications. This single-line description typically includes the SoC model, core count, RAM options, and key features like connectivity options, storage interfaces, and special features.

Learnt from: EvilOlaf
PR: armbian/build#8330
File: config/sources/families/sun55iw3.conf:32-36
Timestamp: 2025-06-25T03:40:52.109Z
Learning: In Armbian build system configuration files like config/sources/families/*.conf, when KERNELSOURCE is not explicitly declared in a case branch, the system falls back to a default KERNELSOURCE value, so missing KERNELSOURCE declarations are not critical issues.

config/kernel/linux-k3-beagle-edge.config (3)

Learnt from: libiunc
PR: armbian/build#8033
File: config/kernel/linux-starfive2-vendor.config:43-43
Timestamp: 2025-03-31T12:57:13.880Z
Learning: For StarFive2 platform kernel configurations, maintain alignment with vendor-provided configurations rather than modifying security settings like SECCOMP. This ensures hardware compatibility as intended by the manufacturer.

Learnt from: pyavitz
PR: armbian/build#8361
File: config/kernel/linux-sunxi64-edge.config:594-597
Timestamp: 2025-07-06T16:27:45.349Z
Learning: In Armbian sunxi64-edge kernel configurations, PCI/PCIe support may be enabled for future-proofing purposes to support upcoming Allwinner SoCs like the T536 that include PCIe Gen2 interfaces, even if current primary targets like H616 lack PCIe controllers. This forward-looking approach prepares the configuration for next-generation hardware in the same SoC family.

Learnt from: EvilOlaf
PR: armbian/build#8330
File: config/sources/families/sun55iw3.conf:32-36
Timestamp: 2025-06-25T03:42:09.086Z
Learning: In Armbian build system configuration files like config/sources/families/*.conf, KERNELSOURCE is explicitly declared when using unofficial or 3rd party kernel repositories (like the "dev" branch using https://github.com/apritzel/linux), but can be omitted when using the standard mainline kernel (like the "edge" branch) since it will fall back to the default mainline source.

🔇 Additional comments (2)

config/kernel/linux-k3-beagle-current.config (1)

816-819: M4 remote-processor support added – confirm runtime pieces are present

CONFIG_TI_K3_M4_REMOTEPROC=m looks correct and does not conflict with the DSP/R5 remote-proc selections already present.
Please double-check that:

1. The matching firmware (*m4*.fw) is shipped in /lib/firmware for PocketBeagle 2 / BeaglePlay.
2. The DT nodes (or overlays) for the M4 core are enabled so the driver can probe successfully.

If either piece is missing the module will load but stay idle.

config/kernel/linux-k3-beagle-edge.config (1)

816-819: Edge config kept in sync – same verification applies

Identical addition here keeps the edge flavour aligned with current.
Re-run the two runtime checks (firmware + DT) for this flavour as well.

✨ Finishing Touches

🧪 Generate unit tests

• Create PR with unit tests
• Post copyable unit tests in a comment

---

Thanks for using CodeRabbit! It's free for OSS, and your support helps us grow. If you like it, consider giving us a shout-out.

❤️ Share

• X
• Mastodon
• Reddit
• LinkedIn

🪧 Tips

Chat

There are 3 ways to chat with CodeRabbit:

• Review comments: Directly reply to a review comment made by CodeRabbit. Example:
  • I pushed a fix in commit <commit_id>, please review it.
  • Explain this complex logic.
  • Open a follow-up GitHub issue for this discussion.
• Files and specific lines of code (under the "Files changed" tab): Tag @coderabbitai in a new review comment at the desired location with your query. Examples:
  • @coderabbitai explain this code block.
  • @coderabbitai modularize this function.
• PR comments: Tag @coderabbitai in a new PR comment to ask questions about the PR branch. For the best results, please provide a very specific query, as very limited context is provided in this mode. Examples:
  • @coderabbitai gather interesting stats about this repository and render them as a table. Additionally, render a pie chart showing the language distribution in the codebase.
  • @coderabbitai read src/utils.ts and explain its main purpose.
  • @coderabbitai read the files in the src/scheduler package and generate a class diagram using mermaid and a README in the markdown format.
  • @coderabbitai help me debug CodeRabbit configuration file.

Support

Need help? Create a ticket on our support page for assistance with any issues or questions.

Note: Be mindful of the bot's finite context window. It's strongly recommended to break down tasks such as reading entire modules into smaller chunks. For a focused discussion, use review comments to chat about specific files and their changes, instead of using the PR comments.

CodeRabbit Commands (Invoked using PR comments)

• @coderabbitai pause to pause the reviews on a PR.
• @coderabbitai resume to resume the paused reviews.
• @coderabbitai review to trigger an incremental review. This is useful when automatic reviews are disabled for the repository.
• @coderabbitai full review to do a full review from scratch and review all the files again.
• @coderabbitai summary to regenerate the summary of the PR.
• @coderabbitai generate docstrings to generate docstrings for this PR.
• @coderabbitai generate sequence diagram to generate a sequence diagram of the changes in this PR.
• @coderabbitai auto-generate unit tests to generate unit tests for this PR.
• @coderabbitai resolve resolve all the CodeRabbit review comments.
• @coderabbitai configuration to show the current CodeRabbit configuration for the repository.
• @coderabbitai help to get help.

Other keywords and placeholders

• Add @coderabbitai ignore anywhere in the PR description to prevent this PR from being reviewed.
• Add @coderabbitai summary to generate the high-level summary at a specific location in the PR description.
• Add @coderabbitai anywhere in the PR title to generate the title automatically.

CodeRabbit Configuration File (.coderabbit.yaml)

• You can programmatically configure CodeRabbit by adding a .coderabbit.yaml file to the root of your repository.
• Please see the configuration documentation for more information.
• If your editor has YAML language server enabled, you can add the path at the top of this file to enable auto-completion and validation: # yaml-language-server: $schema=https://coderabbit.ai/integrations/schema.v2.json

Documentation and Community

• Visit our Documentation for detailed information on how to use CodeRabbit.
• Join our Discord Community to get help, request features, and share feedback.
• Follow us on X/Twitter for updates and announcements.