Superclient-VPN

Please support my repo with your ⭐

Superclient-VPN is a router with multi vpn client protocols to keep your VPN always on, for all Linux embedded boards and written in Django.

Features

• Hardware

  • Support all Linux embedded boards such as Raspberry Pi, Orange Pi, etc
  • Support all wire and wireless on-board interfaces
  • Support all wire and wireless USB interfaces

• Network

  • Support DHCP server (dnsmasq, isc-dhcp-server) on wire and wireless interfaces
  • Support Hostpot on wireless interfaces
  • Support DHCP client or static on wire interfaces
  • Support DHCP client or static on wireless interfaces

• VPN

  • Auto-connect to the best VPN between all connections
  • Auto reconnect to the next VPN between all connections on any failure
  • Support Openvpn
  • Support OpenConnect (Cisco AnyConnect, Juniper Network Connect, and etc)
  • Support V2ray (vmess, trojan, vless, and etc)
  • Add multiple configurations per each VPN protocol
  • logging about VPN connection quality to learn the best VPN connections

• Web

  • Simple web UI

Install and Run the Project

1. Connect your embedded board to the internet
2. Connect to the shell of your embedded board via SSH or etc
3. run cd ~
4. run sudo apt install git
5. run git clone https://github.com/arminmokri/Superclient-VPN.git
6. run cd Superclient-VPN/bin
7. run sudo ./init.sh
8. Wait until the process ends and your embedded board going to reboot
9. Connect to the shell of your embedded board again
10. run cd ~
11. run rm -rf Superclient-VPN
12. run sudo firmware --action "init_release" --repo-username "arminmokri" --repo-username-path "/disk/username" --repo-name "Superclient-VPN" --repo-name-path "/disk/name" --firmware-dir-path "/disk/firmware" --tmp-dir-path "/tmp"
13. sudo reboot
14. Find your embedded board IP and go to web UI http://IP