Assembled and working.
Flash the firmware: https://github.com/atoomnetmarc/Project-Decennium-Firmware
Order components mentioned on the BOM. For the Wemos D1 mini usb-c (U1) you need 2 pieces of 1x08 right angle 2.54mm pin header.
Order PCB. You may want to check the option remove the order number from the front of the PCB.
Solder the PCB.
3d-print a stand. Orient the print for printing like this.
Use 2 M3x12 BHCS screws to screw the stand to the pcb.
