[SelectionDAG] Legalize <1 x T> vector types for atomic load

llvm/docs/LangRef.rst

@@ -10956,8 +10956,8 @@ If the ``load`` is marked as ``atomic``, it takes an extra :ref:`ordering
 <ordering>` and optional ``syncscope("<target-scope>")`` argument. The
 ``release`` and ``acq_rel`` orderings are not valid on ``load`` instructions.
 Atomic loads produce :ref:`defined <memmodel>` results when they may see
-multiple atomic stores. The type of the pointee must be an integer, pointer, or
-floating-point type whose bit width is a power of two greater than or equal to
+multiple atomic stores. The type of the pointee must be an integer, pointer,
+floating-point, or vector type whose bit width is a power of two greater than or equal to
 eight and less than or equal to a target-specific size limit.  ``align`` must be
 explicitly specified on atomic loads. Note: if the alignment is not greater or
 equal to the size of the `<value>` type, the atomic operation is likely to
@@ -11097,8 +11097,8 @@ If the ``store`` is marked as ``atomic``, it takes an extra :ref:`ordering
 <ordering>` and optional ``syncscope("<target-scope>")`` argument. The
 ``acquire`` and ``acq_rel`` orderings aren't valid on ``store`` instructions.
 Atomic loads produce :ref:`defined <memmodel>` results when they may see
-multiple atomic stores. The type of the pointee must be an integer, pointer, or
-floating-point type whose bit width is a power of two greater than or equal to
+multiple atomic stores. The type of the pointee must be an integer, pointer,
+floating-point, or vector type whose bit width is a power of two greater than or equal to
 eight and less than or equal to a target-specific size limit.  ``align`` must be
 explicitly specified on atomic stores. Note: if the alignment is not greater or
 equal to the size of the `<value>` type, the atomic operation is likely to

llvm/lib/CodeGen/SelectionDAG/LegalizeTypes.h

@@ -860,6 +860,7 @@ class LLVM_LIBRARY_VISIBILITY DAGTypeLegalizer {
   SDValue ScalarizeVecRes_ExpOp(SDNode *N);
   SDValue ScalarizeVecRes_INSERT_VECTOR_ELT(SDNode *N);
   SDValue ScalarizeVecRes_LOAD(LoadSDNode *N);
+  SDValue ScalarizeVecRes_ATOMIC_LOAD(AtomicSDNode *N);
   SDValue ScalarizeVecRes_SCALAR_TO_VECTOR(SDNode *N);
   SDValue ScalarizeVecRes_VSELECT(SDNode *N);
   SDValue ScalarizeVecRes_SELECT(SDNode *N);

llvm/lib/CodeGen/SelectionDAG/LegalizeVectorTypes.cpp

@@ -60,6 +60,9 @@ void DAGTypeLegalizer::ScalarizeVectorResult(SDNode *N, unsigned ResNo) {
   case ISD::FP_ROUND:          R = ScalarizeVecRes_FP_ROUND(N); break;
   case ISD::FPOWI:             R = ScalarizeVecRes_ExpOp(N); break;
   case ISD::INSERT_VECTOR_ELT: R = ScalarizeVecRes_INSERT_VECTOR_ELT(N); break;
+  case ISD::ATOMIC_LOAD:
+    R = ScalarizeVecRes_ATOMIC_LOAD(cast<AtomicSDNode>(N));
+    break;
   case ISD::LOAD:           R = ScalarizeVecRes_LOAD(cast<LoadSDNode>(N));break;
   case ISD::SCALAR_TO_VECTOR:  R = ScalarizeVecRes_SCALAR_TO_VECTOR(N); break;
   case ISD::SIGN_EXTEND_INREG: R = ScalarizeVecRes_InregOp(N); break;
@@ -451,6 +454,19 @@ SDValue DAGTypeLegalizer::ScalarizeVecRes_INSERT_VECTOR_ELT(SDNode *N) {
   return Op;
 }
 
+SDValue DAGTypeLegalizer::ScalarizeVecRes_ATOMIC_LOAD(AtomicSDNode *N) {
+
+  SDValue Result = DAG.getAtomic(
+      ISD::ATOMIC_LOAD, SDLoc(N), N->getMemoryVT().getVectorElementType(),
+      N->getValueType(0).getVectorElementType(), N->getChain(), N->getBasePtr(),
+      N->getMemOperand());
+
+  // Legalize the chain result - switch anything that used the old chain to
+  // use the new one.
+  ReplaceValueWith(SDValue(N, 1), Result.getValue(1));
+  return Result;
+}
+
 SDValue DAGTypeLegalizer::ScalarizeVecRes_LOAD(LoadSDNode *N) {
   assert(N->isUnindexed() && "Indexed vector load?");
 

llvm/lib/IR/Verifier.cpp

@@ -4255,9 +4255,10 @@ void Verifier::visitLoadInst(LoadInst &LI) {
     Check(LI.getOrdering() != AtomicOrdering::Release &&
               LI.getOrdering() != AtomicOrdering::AcquireRelease,
           "Load cannot have Release ordering", &LI);
-    Check(ElTy->isIntOrPtrTy() || ElTy->isFloatingPointTy(),
-          "atomic load operand must have integer, pointer, or floating point "
-          "type!",
+    Check(ElTy->getScalarType()->isIntOrPtrTy() ||
+              ElTy->getScalarType()->isFloatingPointTy(),
+          "atomic load operand must have integer, pointer, floating point, "
+          "or vector type!",
           ElTy, &LI);
     checkAtomicMemAccessSize(ElTy, &LI);
   } else {
@@ -4281,9 +4282,10 @@ void Verifier::visitStoreInst(StoreInst &SI) {
     Check(SI.getOrdering() != AtomicOrdering::Acquire &&
               SI.getOrdering() != AtomicOrdering::AcquireRelease,
           "Store cannot have Acquire ordering", &SI);
-    Check(ElTy->isIntOrPtrTy() || ElTy->isFloatingPointTy(),
-          "atomic store operand must have integer, pointer, or floating point "
-          "type!",
+    Check(ElTy->getScalarType()->isIntOrPtrTy() ||
+              ElTy->getScalarType()->isFloatingPointTy(),
+          "atomic store operand must have integer, pointer, floating point, "
+          "or vector type!",
           ElTy, &SI);
     checkAtomicMemAccessSize(ElTy, &SI);
   } else {

llvm/test/Assembler/atomic.ll

@@ -52,6 +52,15 @@ define void @f(ptr %x) {
   ; CHECK: atomicrmw volatile usub_sat ptr %x, i32 10 syncscope("agent") monotonic
   atomicrmw volatile usub_sat ptr %x, i32 10 syncscope("agent") monotonic
 
+  ; CHECK : load atomic <1 x i32>, ptr %x unordered, align 4
+  load atomic <1 x i32>, ptr %x unordered, align 4
+  ; CHECK : store atomic <1 x i32> splat (i32 3), ptr %x release, align 4
+  store atomic <1 x i32> <i32 3>, ptr %x release, align 4
+  ; CHECK : load atomic <2 x i32>, ptr %x unordered, align 4
+  load atomic <2 x i32>, ptr %x unordered, align 4
+  ; CHECK : store atomic <2 x i32> <i32 3, i32 4>, ptr %x release, align 4
+  store atomic <2 x i32> <i32 3, i32 4>, ptr %x release, align 4
+
   ; CHECK: fence syncscope("singlethread") release
   fence syncscope("singlethread") release
   ; CHECK: fence seq_cst

llvm/test/CodeGen/X86/atomic-load-store.ll

@@ -28,3 +28,12 @@ define i32 @test3(ptr %ptr) {
   %val = load atomic i32, ptr %ptr seq_cst, align 4
   ret i32 %val
 }
+
+define <1 x i32> @atomic_vec1_i32(ptr %x) {
+; CHECK-LABEL: atomic_vec1_i32:
+; CHECK:       ## %bb.0:
+; CHECK-NEXT:    movl (%rdi), %eax
+; CHECK-NEXT:    retq
+  %ret = load atomic <1 x i32>, ptr %x acquire, align 4
+  ret <1 x i32> %ret
+}

llvm/test/Verifier/atomics.ll

@@ -1,14 +1,15 @@
 ; RUN: not opt -passes=verify < %s 2>&1 | FileCheck %s
+; CHECK: atomic store operand must have integer, pointer, floating point, or vector type!
+; CHECK: atomic load operand must have integer, pointer, floating point, or vector type!
 
-; CHECK: atomic store operand must have integer, pointer, or floating point type!
-; CHECK: atomic load operand must have integer, pointer, or floating point type!
+%ty = type { i32 };
 
-define void @foo(ptr %P, <1 x i64> %v) {
-  store atomic <1 x i64> %v, ptr %P unordered, align 8
+define void @foo(ptr %P, %ty %v) {
+  store atomic %ty %v, ptr %P unordered, align 8
   ret void
 }
 
-define <1 x i64> @bar(ptr %P) {
-  %v = load atomic <1 x i64>, ptr %P unordered, align 8
-  ret <1 x i64> %v
+define %ty @bar(ptr %P) {
+  %v = load atomic %ty, ptr %P unordered, align 8
+  ret %ty %v
 }