This is a custom component for Home Assistant to integrate the pulsatrix charger (v3) using the MQTT API (v2).
❗ This is an unofficial plugin that is not officially supported by pulsatrix
- install an MQTT Broker (preferrably Mosquitto). Either via "Addons" (if you use Home Assitant OS) or manually on your OS
- contact pulsatrix support and ask them to link the devices to the MQTT Broker
- they will ask you for the IP/Hostname of the MQTT Broker within the current network as it needs to be reachable from the charging controller
- in Home Assistant add the MQTT Integration and configure it to the freshly installed MQTT Broker
Use HACS to install this custom component.
- Clone the repo
- copy the folder custom_components/pulsatrix_local_mqtt to your custom_components folder
- restart Home Assistant
Use the Web UI (Config flow) to add the "pulsatrix" integration. You have to know the serial number (12 digits) of your device.
| Friendly name | Category | Type | Enabled per default | Description |
|---|---|---|---|---|
| Charging | diagnostic |
binary sensor | ✔️ | Weather the EV is charging or not |
| Current Consumption | diagnostic |
sensor | ✔️ | The consumption in kW |
| Energy | diagnostic |
sensor | ✔️ | The transferred energy of the current session in kWh |
| State | diagnostic |
sensor | ✔️ | The state of the controller (see below) |
| Frequency | diagnostic |
sensor | ⬜ | The grid frequency |
| P1 voltage | diagnostic |
sensor | ⬜ | Phase 1 voltage |
| P2 voltage | diagnostic |
sensor | ⬜ | Phase 2 voltage |
| P3 voltage | diagnostic |
sensor | ⬜ | Phase 3 voltage |
| P1 amperage | diagnostic |
sensor | ⬜ | Phase 1 amperage |
| P2 amperage | diagnostic |
sensor | ⬜ | Phase 2 amperage |
| P3 amperage | diagnostic |
sensor | ⬜ | Phase 3 amperage |
diagnostic: An entity exposing some configuration parameter or diagnostics of a device
config: An entity which allows changing the configuration of a device
The sensor state can have the following states
| Value | Friendly name | Raw Value |
|---|---|---|
| Idle | No transaction in progress | IDLE |
| Awaiting Start | Transaction is currently blocked from starting | AWAITING_START |
| Awaiting Authorization | Transaction is awaiting authorization by some means | AWAITING_AUTHORIZATION |
| Starting | Transaction is currently starting (transitional state) | STARTING |
| Not offering charging | Vehicle is connected but not offered any charging current | SUSPENDED_EVSE |
| Offered charging but not taking | Vehicle is connected, offered charging but not taking any | SUSPENDED_EV |
| Charging | Electrical energy is being transferred | CHARGING |
| Failed | Charging has failed, but the vehicle is still connected | FAILED |
| Stopped externally | The transaction has been stopped by external means | STOPPED |
| Wait for EV to reconnect | The transaction is about to end, but lingering to give the user a chance to reconnect the vehicle | LINGERING |
| Completed | The transaction has irrevocably ended and is considered completed | COMPLETE |