Bump prometheus-net.AspNetCore from 6.0.0 to 8.2.1

[dependabot]

Bumps prometheus-net.AspNetCore from 6.0.0 to 8.2.1.

Release notes

Sourced from prometheus-net.AspNetCore's releases.

8.2.1 - bugfix for occasional exception on metrics scrape

Fix occasional "Collection was modified" exception when serializing metrics. #464

v8.2.0 - performance improvements

• .WithLabels() & similar now accept ReadOnlyMemory as alternative to string[]. Same behavior, just easier to use if you already have a ReadOnlyMemory.
• .WithLabels() & similar now accept ReadOnlySpan as alternative to string[]. This enables allocation-free metric instance creation if a metric instance with these labels is already known.
• Incorporated various optimizations to reduce the required CPU time and allocated memory, including #410, #443 and other contributions.
• Observation of large histograms is now 10-30% faster on machines that support AVX2 instructions.
• health checks exposed via ForwardToPrometheus() no longer create a default metric if a custom metric is provided #444

v8.1.0 - Add support for capturing HttpClient metrics from all registered HttpClients

Add support for capturing HttpClient metrics from all registered HttpClients (services.UseHttpClientMetrics()).

v8.0.1 - Allow ObservableCounter to be reset

Allow ObservableCounter to be reset. Previously, the MeterAdapter output got stuck on its previous maximum if the underlying Meter reset its value to a lower value. Now we transform the value 1:1.

v8.0.0 - OpenMetrics, exemplars, performance optimizations and bugfixes

• Added OpenMetrics exposition format support (#388).
• Added exemplar support for Counter and Histogram (#388).
• The ':' character is no longer allowed in metric or label names. For metric names, Prometheus standard practice is to use colon only in recording rules.
• Publish symbol packages and add Source Link support for easier debugging experience.
• Fix defect where metrics with different labels could overwrite each other in specific circumstances with multiple metric factories in use (#389).
• Ensure even harder that MetricPusher flushes the final state before stopping (#383 and #384)
• Simplify DotNetStats built-in collector code for ease of readability and more best practices (#365, #364)
• Slightly improve Counter performance under concurrent load.
• Reduce memory allocations performed during ASP.NET Core HTTP request tracking.
• By default, EventCounterAdapter will only listen to a small predefined set of general-purpose useful event sources, to minimize resource consumption in the default configuration. A custom event source filter must now be provided to enable listening for additional event sources.
• EventCounterAdapter will only refresh data every 10 seconds by default, to reduce amount of garbage generated in memory (.NET event counters are very noisy and create many temporary objects).
• Added IManagedLifetimeMetricFactory.WithLabels() to enable simpler label enrichment in scenarios where lifetime-managed metric instances are used.
• Added back .NET Standard 2.0 support as some customers had a hard dependency on .NET Standard 2.0 (despite not being a documented feature even earlier).
• Added (Observable)UpDownCounter support to MeterAdapter (.NET 7 specific feature).

v7.0.0

• .NET Core specific functionality now targeting .NET 6.0 or greater (all previous versions will be end of life by December 2022).
• Relaxed the API restriction that forbade you to create multiple metrics with the same name but different label names. While this is a Prometheus anti-pattern, it is a standard pattern in other metrics technologies and we will allow it in the name of interoperability.
• Added IMetricFactory.WithLabels() to define static labels per-factory and reduce the effort needed by users when defining static labels in specific scopes.
• Added automatic metric expiration feature, to remove timeseries when they are no longer used after a while. This improves interoperability with other metrics technologies such as .NET Meters.
• (Breaking change) Rewrite of the MeterAdapter functionality to bridge .NET 6 metrics to Prometheus. API remains equivalent, though options class changed. Output format (what metrics are published) is completely different. Now it translates metric names (instead of putting them in labels) and preserves tags (labels) provided via the .NET Meters API. Added sample project to demonstrate functionality. Ref #359
• (Breaking change) Dropped support for .NET Standard 2.0 - now will target specifically .NET 6.0 and .NET Framework 4.6.2. This was already documented before but there was "unofficial" support also for .NET Standard remaining. This is now removed.
• (Breaking change) EventCounterAdapter output format changed to translate counters to Prometheus metrics and to improve usability by publishing both counters and gauges from ambiguous event counters.
• EventCounterAdapter and MeterAdapter are now enabled on startup by default.
• Added some debug metrics to indicate the number of metric families, instances and timeseries being exported by prometheus-net.
• Added typical benchmark results to readme for easy reference, and to show relative speed of the simple versus complex instruments.
• (Breaking change) Removed MetricConfiguration.StaticLabels because it had negative performance impact on many code paths that did not use it. The same functionality can be manually implemented in user code. Static labels remain available on registry and factory level.
• When a before-collection metrics update callback throws an exception, it is now logged and ignored instead of breaking all metrics collection.
• EventCounterAdapter now defaults to Informational events only, for reduced performance overhead. Can be configured via callback.

Changelog

Sourced from prometheus-net.AspNetCore's changelog.

• 8.2.1

• Fix occasional "Collection was modified" exception when serializing metrics. #464

• 8.2.0

• .WithLabels() & similar now accept ReadOnlyMemory as alternative to string[]. Same behavior, just easier to use if you already have a ReadOnlyMemory.
• .WithLabels() & similar now accept ReadOnlySpan as alternative to string[]. This enables allocation-free metric instance creation if a metric instance with these labels is already known.
• Incorporated various optimizations to reduce the required CPU time and allocated memory, including #410, #443 and other contributions.
• Observation of large histograms is now 10-30% faster on machines that support AVX2 instructions.
• health checks exposed via ForwardToPrometheus() no longer create a default metric if a custom metric is provided #444

• 8.1.1

• Fix bug in .NET Meters API adapter for UpDownCounter, which was incorrectly transformed to Prometheus metrics. #452 and #453

• 8.1.0

• Add support for capturing HttpClient metrics from all registered HttpClients (services.UseHttpClientMetrics()).

• 8.0.1

• Allow ObservableCounter to be reset. Previously, the MeterAdapter output got stuck on its previous maximum if the underlying Meter reset its value to a lower value. Now we transform the value 1:1.

• 8.0.0

• Added OpenMetrics exposition format support (#388).
• Added exemplar support for Counter and Histogram (#388).
• The ':' character is no longer allowed in metric or label names. For metric names, Prometheus standard practice is to use colon only in recording rules.
• Publish symbol packages and add Source Link support for easier debugging experience.
• Fix defect where metrics with different labels could overwrite each other in specific circumstances with multiple metric factories in use (#389).
• Ensure even harder that MetricPusher flushes the final state before stopping (#383 and #384)
• Simplify DotNetStats built-in collector code for ease of readability and more best practices (#365, #364)
• Slightly improve Counter performance under concurrent load.
• Reduce memory allocations performed during ASP.NET Core HTTP request tracking.
• By default, EventCounterAdapter will only listen to a small predefined set of general-purpose useful event sources, to minimize resource consumption in the default configuration. A custom event source filter must now be provided to enable listening for additional event sources.
• EventCounterAdapter will only refresh data every 10 seconds by default, to reduce amount of garbage generated in memory (.NET event counters are very noisy and create many temporary objects).
• Added IManagedLifetimeMetricFactory.WithLabels() to enable simpler label enrichment in scenarios where lifetime-managed metric instances are used.

• 7.1.0

• Added back .NET Standard 2.0 support as some customers had a hard dependency on .NET Standard 2.0 (despite not being a documented feature even earlier).
• Added (Observable)UpDownCounter support to MeterAdapter (.NET 7 specific feature).

• 7.0.0

• .NET Core specific functionality now targeting .NET 6.0 or greater (all previous versions will be end of life by December 2022).
• Relaxed the API restriction that forbade you to create multiple metrics with the same name but different label names. While this is a Prometheus anti-pattern, it is a standard pattern in other metrics technologies and we will allow it in the name of interoperability.
• Added IMetricFactory.WithLabels() to define static labels per-factory and reduce the effort needed by users when defining static labels in specific scopes.
• Added automatic metric expiration feature, to remove timeseries when they are no longer used after a while. This improves interoperability with other metrics technologies such as .NET Meters.
• (Breaking change) Rewrite of the MeterAdapter functionality to bridge .NET 6 metrics to Prometheus. API remains equivalent, though options class changed. Output format (what metrics are published) is completely different. Now it translates metric names (instead of putting them in labels) and preserves tags (labels) provided via the .NET Meters API. Added sample project to demonstrate functionality. Ref #359
• (Breaking change) Dropped support for .NET Standard 2.0 - now will target specifically .NET 6.0 and .NET Framework 4.6.2. This was already documented before but there was "unofficial" support also for .NET Standard remaining. This is now removed.
• (Breaking change) EventCounterAdapter output format changed to translate counters to Prometheus metrics and to improve usability by publishing both counters and gauges from ambiguous event counters.
• EventCounterAdapter and MeterAdapter are now enabled on startup by default.
• Added some debug metrics to indicate the number of metric families, instances and timeseries being exported by prometheus-net.
• Added typical benchmark results to readme for easy reference, and to show relative speed of the simple versus complex instruments.
• Removed MetricConfiguration.StaticLabels because it had negative performance impact on many code paths that did not use it. The same functionality can be manually implemented in user code. Static labels remain available on registry and factory level.
• When a before-collection metrics update callback throws an exception, it is now logged and ignored instead of breaking all metrics collection.
• EventCounterAdapter now defaults to Informational events only, for reduced performance overhead. Can be configured via callback.

Commits

• 60e9106 De-confusify histogram1 in .NET Meters API sample
• 6a88ea9 Fix occasional "Collection was modified" exception when serializing metrics. ...
• a2c1c8f Merge branch 'master' of https://github.com/prometheus-net/prometheus-net
• 4787691 History update
• 36b4750 Create default gauge only if needed (#444)
• 9cb24e8 Add WithLabels(ROM) and WithLabels (ROS) to ICollector and tidy up some bench...
• 7837255 Use Dictionary.TryAdd() to reduce CPU cost of adding new items to dictionaries
• 78cd754 ServerGC in benchmarks
• 99f640f Optimize StringSequence Concat() for one-empty cases
• 31ebd1b Use slightly maybe sort of a bit faster atomic logic in random places
• Additional commits viewable in compare view

You can trigger a rebase of this PR by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot merge will merge this PR after your CI passes on it
• @dependabot squash and merge will squash and merge this PR after your CI passes on it
• @dependabot cancel merge will cancel a previously requested merge and block automerging
• @dependabot reopen will reopen this PR if it is closed
• @dependabot close will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

Note
Automatic rebases have been disabled on this pull request as it has been open for over 30 days.

[dependabot]

Superseded by #211.