Acrylic Staked case for Type65+ for those who have spare PCB and plate.
The listed quantity is just enough — it’s better to grab extras just in case.
| Hardware | Size | Length | Quantity | Remarks | |
|---|---|---|---|---|---|
| 1 | Screw | M2 | 6MM | 24 | For bottom layer & feet and to attach feet. |
| 3 | Screw | M2 | 10MM | 12 | For top layer. |
| 4 | Screw | M2 | 14MM | 4 | For thicker bottom layer near daugther board |
| 5 | Standoff Spacer(Female to Female) | M2 | 10MM | 12 | For case layer. |
| 6 | Standoff Spacer(Female to Female) | M2 | 26MM | 4 | For the part. |
| 7 | Nut | M2 | - | 8 | 2 inside the feet; 4 for mounting daugther board. |
| 8 | Rubber feet | 22*12 MM | - | 4 | Can replaced with bumpons. |
| 9 | Gasket strip (2MM thick) | - | - | 8 | Thinner strip at the top. |
| 10 | Gasket strip (4/5MM thick) | - | - | 8 | Thicker strip at the bottom. |
Here's the type of screw, standoff, and nut I used.
.jpg){kind=spacer}
