Pupil Detection

---

Functionality

• Detects the pupil of an eye based on largest contour technique.
• Each frame/image is processed in grayscale format and then converted to binary image.
• Detects the maximum contour (i.e the pupil area) and creates a circle bounding box around it.

---

Packages used

1. OpenCV v3.4
2. Numpy v1.15
3. os
4. shutil

---

Steps involved for detecting pupil from images

1. Loop through all the images from the input folder
2. Convert the images from BGR colorspace to grayscale
3. Use cv2.GaussianBlur with kernel size (9, 9) to remove noise to an extent
4. Use cv2.medianBlur to reduce the noise further
5. Threshold the image to get the contours
6. Use cv2.findContours to find all the contours visible after thresholding and select the largest contour out of them only, as it is the pupil.
7. Get the x,y,w,h from the cv2.boundingRect.
8. Draw a circle using cv2.circle
9. Save the results in the output folder

---

Steps involved for detecting pupil from a video of an eye

1. Capture the video file using cv2.VideoCapture
2. Loop the video continuously and save the frames of the video using read()
3. Get the exact area of the eye (ROI) from the whole frame.
4. Convert the ROI region into Grayscale then use GaussianBlur as well as medianBlur to reduce the noise.
5. Threshold the ROI region to get the contours and select only the largest contour as it will be pupil.
6. Once, contour is detected using cv2.findContours, get the x,y,w,h from the cv2.boundingRect
7. Draw a circle using cv2.circle

NOTE: use cap.set(cv2.CAP_PROP_POS_FRAMES, 0) to loop back the video from beginning otherwise, it will throw error as there is no frame to capture.

NOTE: At the end release() the video file.