Add acrylic Top/Bottom plates .dwg files

README.md

@@ -78,4 +78,8 @@ Sofle RGB was contributed by [Dane Evans](https://github.com/DaneEvans).
 Sofle Choc was designed by [Brian Low](https://github.com/BrianLow)
 
 
+## Using Acrylic Plates & Magenet
 
+![Sofle Choc Wireless Keyboard with Acrylic Plates](docs/images/Acrylic%20Top-Bottom.jpg)
+
+![Sofle Choc Wireless Keyboard pack](docs/images/Magnet-Packed.jpg)

SofleChocWireless/Case/AcrylicCase/README.md

@@ -0,0 +1,15 @@
+## Plates
+
+Send `SofleChocWireless\Case\AcrylicCase\SofleChocWireless-Bottom.dwg` to a Acrylic fabrication service.
+The bottom plates can be 1.6mm or 1.2mm thick Acrylic Plates, either will work.
+
+Send `SofleChocWireless\Case\AcrylicCase\SofleChocWireless-Top.dwg` to a Acrylic fabrication service.
+The bottom plates can be 1.2mm thick PC or POM plates, either will work.
+
+## Screws and Standoffs
+
+You need 20 M2 Screws and 10 M2 spacers/standoffs. 5mm spacers will be long enough.
+
+## Magnet
+
+I use 6 `20x10x1mm` rectangular magnets, 3 magnets are attached to each bottom plates.