CE AOSP RPB HiKey 15.10 Build

Building AOSP from source

NOTE: This build instructions are not yet reflecting the 15.10 image

AOSP sources are hosted in these repositories:

• https://github.com/96boards/android_hardware_ti_wpan
• https://github.com/96boards/android_external_wpa_supplicant_8
• https://github.com/96boards/android_device_linaro_hikey
• https://github.com/96boards/android_manifest

Build setup:

Please setup the host machine by following the instructions here: http://source.android.com/source/initializing.html

NOTE: The build tries to mount a loop device as fat partition to create the boot-fat.uefi.img filesystem image. Please make sure your user is allowed to run those commands in sudo without password by running “visudo” and appending the following lines (replacing “” with your username):

<USER> ALL= NOPASSWD: /bin/mount
<USER> ALL= NOPASSWD: /bin/umount
<USER> ALL= NOPASSWD: /sbin/mkfs.fat
<USER> ALL= NOPASSWD: /bin/cp

Download the code:

$ mkdir android/
$ cd android/

Download and extract the Mali vendor binaries in the above directory: http://builds.96boards.org/snapshots/hikey/linaro/binaries/20150706/vendor.tar.bz2

Build the image:

$ repo init -u https://android.googlesource.com/platform/manifest -b android-5.1.1_r1\
> -g "default,-device,hikey"
$ cd .repo/
$ git clone https://github.com/96boards/android_manifest -b android-5.0 local_manifests
$ cd -
$ repo sync -j8
$ source build/envsetup.sh
$ lunch hikey-userdebug
$ make droidcore -j8
$ cd out/target/product/hikey

TODO

• Update to reflect the latest/current build