v6.17.7-r0

• 21bb6b9 wcn36xx: ignore extra fields wcn36xx_hal_tx_compl_ind_msg
• da322b5 drm/msm: Fix GEM free for imported dma-bufs
• d1a7c16 media: venus: fix crash caused by queuing buffers after stream start
• a83aa31 media: venus: hfi_parse: implement extra property types
• d9fbf88 media: venus: fix hfi parsing logic
• 39e0af7 arm64: dts: qcom: sdm450: override camss compatible
• 92a5f1d media: qcom: camss: add resource for sdm450
• 17cbe07 media: qcom: camss: fix NULL dereference in remove handler
• 85d7fbc media: qcom: camss: use link frequency in vfe clock calculation
• e45033a media: i2c: add simple lens driver
• 92a0fab power: supply: Add driver for SM5708 MFD PMIC
• becee64 drm/msm: Prevent early unmap of shared objects
• 68b1847 arm64: dts: qcom: sdm450: Add device tree for Samsung Galaxy A6+
• f27a2ff arm64: dts: qcom: pm8953: add MPP GPIOs
• 54a6a75 arm64:configs: update a6plte config
• 50ea0d6 arm64: dts: qcom: msm8953: Switch devices to usb-role-switch
• 8fd663b arm64: dts: qcom: msm8953: Flatten USB controller node
• 3f15977 UPSTREAM usb: dwc3: qcom: Implement glue callbacks to facilitate runtime suspend
• dbbbe3b UPSTREAM usb: dwc3: core: Introduce glue callbacks for flattened implementations
• 90c6718 UPSTREAM usb: dwc3: qcom: Remove extcon functionality from glue layer
• f1521a0 UPSTREAM usb: dwc3: qcom: Add shutdown handler
• 8afe0a8 power: supply: qcom-smbchg: Rework cable detection
• 9190d35 FROMLIST v1 drm/msm/dpu: Disable broken YUV on QSEED2 hardware
• d09c35e FROMLIST v1 drm/msm/dpu: Disable scaling for unsupported scaler types
• 029785c FROMLIST v1 drm/msm/dpu: Propagate error from dpu_assign_plane_resources
• e9cb623 FROMLIST v1 drm/msm/dpu: Fix allocation of RGB SSPPs without scaling
• fa116e2 power: supply: Add driver for PMI8994 fuel gauge
• 9376dab dt-bindings: power: supply: Document qcom pmi8994-fg
• 9162044 media: qcom: camss: Enable both vfe cores for ispif reset.
• 9502cd0 MSM8996 media: qcom: camss: Make ispif_reset go though VFE user counting logic
• bdc9350 SDM845 backlight: qcom-wled: fix unbalanced enable irq
• 4769c60 UPSTREAM arm64: dts: qcom: msm8953: add spi_7
• 50794ec UPSTREAM arm64: dts: qcom: msm8953: correct SPI pinctrls
• 2a6aa26 UPSTREAM arm64: dts: qcom: msm8953: fix SPI clocks
• 765bded arm64: dts: qcom: pmi8950: fix VADC channel scaling factors
• b127fa9 arm64: dts: qcom: pmi8950: add missing vadc channels

v6.16.3-r0

• 2c1b02a drm/msm/dsi: Reset DSI host on video done timeout
• 3a8fe0f arm64: dts: qcom: msm8953: xiaomi-ysl: Enable irled
• dbcff65 arm64: dts: qcom: msm8953: Fix SPI interfaces
• 6a12c1d backlight: qcom-wled: Make ovp and short irq optional
• aff96da Revert "arm64: dts: qcom: pmi8950: Add missing OVP interrupt"
• 397403e backlight: qcom-wled: Support ovp values for PMI8950
• e856a5f usb: dwc3: qcom-legacy: re-configure wrapper registers on resume
• b7ab164 usb: dwc3: qcom: re-configure wrapper registers on resume
• 48af3f6 arm64: dts: qcom: msm8953: Add device tree for Billion Capture+
• 8ab176f arm64: dts: qcom: sdm632-fairphone-fp3: Enable speaker
• 890d324 FROMLIST v2 arm64: dts: qcom: sdm632-fairphone-fp3: Add AW8898 amplifier
• 061dce6 FROMLIST v2 ASoC: codecs: Add Awinic AW8898 amplifier driver
• 07c1057 FROMLIST v2 ASoC: dt-bindings: Document Awinic AW8898 amplifier

v6.15.0-r0

Changelog:

• 3ee64b1 HACK Input: novatek-nvt-ts - Increase sleep at reset
• 4a8fe49 FROMLIST v1 media: qcom: camss: csiphy-3ph: Make non-Gen2 PHY work again

Other changes:

• Drop NT36XXX driver

v6.14.0-r1

Changes:

• 15beb38 fixup! arm64: dts: qcom: msm8953: Use firmware-name for zap_shader.
• 17bc2d7 FROMLIST v1 arm64: dts: qcom: sdm632-fairphone-fp3: Enable modem
• 086a34c FROMLIST v1 arm64: dts: qcom: sdm632-fairphone-fp3: Add firmware-name for adsp & wcnss
• beeb243 FROMLIST v1 arm64: dts: qcom: sdm632-fairphone-fp3: Add newlines between regulator nodes
• f060892 FROMLIST v1 arm64: dts: qcom: sdm632-fairphone-fp3: Move status properties last
• 58f8420 squash! arm64: dts: qcom: msm8953: enable modem remoteproc

Full Changelog: v6.14.0-r0...v6.14.0-r1

v6.14.0-r0

Changes:

• Follow labibb changes at upstream
• Squash couple of commit related to xiaomi-common, xiaomi-rosy, xiaomi-onclite, xiaomi-ysl
• Set vmax for motorola-potter haptics

New Commits:

• 9b58f4e HACK media: qcom: camss: fix VFE pm domain off
• 78cef3d arm64: dts: qcom: xiaomi-vince: Set labibb regulator voltage

v6.13-r0

• e33e7f9 arm64: dts: qcom: msm8953: motorola-potter: add touchscreen reset GPIO
• dd26b8f Input: rmi_i2c: introduce reset GPIO handling
• 39aa0e7 dt-bindings: input: add max output voltage & auto resonance mode to the Qualcomm SPMI haptics
• 8ec6321 input: misc: qcom-spmi-haptics: make vmax configureable via DT prop
• 2ed3f64 input: misc: qcom-spmi-haptics: make auto res mode configureable via DT prop

v6.12.0-r2: Motorola hotfix

Full Changelog: v6.12.0-r1...v6.12.0-r2

v6.12.0-r1

What's Changed

• Add Lenovo ThinkSmart View (CD-18781Y) by @kaechele in #221
• Fixups for Lenovo ThinkSmart View by @kaechele in #222

Full Changelog: v6.12.0-r0...v6.12.0-r1

v6.12.0-r0

Changes:

• aa9f6e6 drm/panel: fairphone-fp3-hx83112b: Call set_tear_on when turning on
• b4fa0e5 arm64: dts: qcom: msm8953: xiaomi-ysl: enable haptic
• 377c138 arm64: dts: qcom: msm8953: motorola-potter: enable haptic
• e3806d5 arm64: dts: qcom: msm8953: xiaomi-tissot: enable haptic
• fe7da3a arm64: dts: qcom: msm8953: xiaomi-markw: enable haptic
• a4f793d arm64: dts: qcom: msm8953: xiaomi-mido: enable haptic
• 25938ed arm64: dts: qcom: msm8953: xiaomi-daisy: enable haptic
• 9405b50 arm64: dts: qcom: sdm450: xiaomi-rosy: enable haptic
• a7a705d arm64: dts: qcom: msm8953: xiaomi-vince: enable haptics
• 1e5835f arm64: dts: qcom: pmi8950: add pmi8950-haptics
• 16cddf1 dt-bindings: input: add pmi8950-haptics identifier
• 17c6805 input: misc: qcom-spmi-haptics: add support for ERM haptics
• 72bca26 input: add Qualcomm SPMI haptics driver
• 0a50f31 dt-bindings: input: add Qualcomm SPMI haptics driver

v6.11.6-r2 Hot fix for Redmi 5 (rosy)

Full Changelog: v6.11.6-r1...v6.11.6-r2