Add Mark and Space variants to Parity enum

src/lib.rs

@@ -208,6 +208,16 @@ pub enum Parity {
 
     /// Parity bit sets even number of 1 bits.
     Even,
+
+    /// Parity bit is set to 1.
+    ///
+    /// Only supported on Windows and Linux.
+    Mark,
+
+    /// Parity bit is set to 0.
+    ///
+    /// Only supported on Windows and Linux.
+    Space,
 }
 
 impl fmt::Display for Parity {
@@ -216,6 +226,8 @@ impl fmt::Display for Parity {
             Parity::None => write!(f, "None"),
             Parity::Odd => write!(f, "Odd"),
             Parity::Even => write!(f, "Even"),
+            Parity::Mark => write!(f, "Mark"),
+            Parity::Space => write!(f, "Space"),
         }
     }
 }

src/posix/termios.rs

@@ -145,25 +145,71 @@ pub(crate) fn set_termios(fd: RawFd, termios: &Termios) -> Result<()> {
     crate::posix::ioctl::tcsets2(fd, termios)
 }
 
-pub(crate) fn set_parity(termios: &mut Termios, parity: Parity) {
+// The Result return will seem pointless on platforms that support all parity variants, but we need
+// it for the others.
+#[allow(clippy::unnecessary_wraps)]
+pub(crate) fn set_parity(termios: &mut Termios, parity: Parity) -> Result<()> {
     match parity {
         Parity::None => {
             termios.c_cflag &= !(libc::PARENB | libc::PARODD);
             termios.c_iflag &= !libc::INPCK;
             termios.c_iflag |= libc::IGNPAR;
+            #[cfg(any(target_os = "linux", target_os = "android"))]
+            {
+                termios.c_iflag &= !libc::CMSPAR;
+            }
         }
         Parity::Odd => {
             termios.c_cflag |= libc::PARENB | libc::PARODD;
             termios.c_iflag |= libc::INPCK;
             termios.c_iflag &= !libc::IGNPAR;
+            #[cfg(any(target_os = "linux", target_os = "android"))]
+            {
+                termios.c_iflag &= !libc::CMSPAR;
+            }
         }
         Parity::Even => {
             termios.c_cflag &= !libc::PARODD;
             termios.c_cflag |= libc::PARENB;
             termios.c_iflag |= libc::INPCK;
             termios.c_iflag &= !libc::IGNPAR;
+            #[cfg(any(target_os = "linux", target_os = "android"))]
+            {
+                termios.c_iflag &= !libc::CMSPAR;
+            }
+        }
+        #[cfg(any(target_os = "linux", target_os = "android"))]
+        Parity::Mark => {
+            termios.c_cflag |= libc::PARODD;
+            termios.c_cflag |= libc::PARENB;
+            termios.c_iflag |= libc::INPCK;
+            termios.c_iflag &= !libc::IGNPAR;
+            termios.c_iflag |= libc::CMSPAR;
+        }
+        #[cfg(any(target_os = "linux", target_os = "android"))]
+        Parity::Space => {
+            termios.c_cflag &= !libc::PARODD;
+            termios.c_cflag |= libc::PARENB;
+            termios.c_iflag |= libc::INPCK;
+            termios.c_iflag &= !libc::IGNPAR;
+            termios.c_iflag |= libc::CMSPAR;
+        }
+        #[cfg(not(any(target_os = "linux", target_os = "android")))]
+        Parity::Mark => {
+            return Err(crate::Error::new(
+                crate::ErrorKind::InvalidInput,
+                "Mark parity not supported on this platform",
+            ));
+        }
+        #[cfg(not(any(target_os = "linux", target_os = "android")))]
+        Parity::Space => {
+            return Err(crate::Error::new(
+                crate::ErrorKind::InvalidInput,
+                "Space parity not supported on this platform",
+            ));
         }
     };
+    Ok(())
 }
 
 pub(crate) fn set_flow_control(termios: &mut Termios, flow_control: FlowControl) {

src/posix/tty.rs

@@ -171,7 +171,7 @@ impl TTYPort {
 
         // Configure the low-level port settings
         let mut termios = termios::get_termios(fd.0)?;
-        termios::set_parity(&mut termios, builder.parity);
+        termios::set_parity(&mut termios, builder.parity)?;
         termios::set_flow_control(&mut termios, builder.flow_control);
         termios::set_data_bits(&mut termios, builder.data_bits);
         termios::set_stop_bits(&mut termios, builder.stop_bits);
@@ -653,7 +653,7 @@ impl SerialPort for TTYPort {
 
     fn set_parity(&mut self, parity: Parity) -> Result<()> {
         let mut termios = termios::get_termios(self.fd)?;
-        termios::set_parity(&mut termios, parity);
+        termios::set_parity(&mut termios, parity)?;
         #[cfg(any(target_os = "ios", target_os = "macos"))]
         return termios::set_termios(self.fd, &termios, self.baud_rate);
         #[cfg(not(any(target_os = "ios", target_os = "macos")))]

src/windows/com.rs

@@ -334,6 +334,8 @@ impl SerialPort for COMPort {
         match dcb.Parity {
             ODDPARITY => Ok(Parity::Odd),
             EVENPARITY => Ok(Parity::Even),
+            MARKPARITY => Ok(Parity::Mark),
+            SPACEPARITY => Ok(Parity::Space),
             NOPARITY => Ok(Parity::None),
             _ => Err(Error::new(
                 ErrorKind::Unknown,

src/windows/dcb.rs

@@ -81,6 +81,8 @@ pub(crate) fn set_parity(dcb: &mut DCB, parity: Parity) {
         Parity::None => NOPARITY,
         Parity::Odd => ODDPARITY,
         Parity::Even => EVENPARITY,
+        Parity::Mark => MARKPARITY,
+        Parity::Space => SPACEPARITY,
     };
 
     dcb.set_fParity(if parity == Parity::None { FALSE } else { TRUE } as DWORD);