v1.6.0.5

Additional TERRA LIFE Support

• added support for i3d paths in container definitions
• added configs for KRONE/CLAAS/HESSTON bales

v1.6.0.4

Added support for TerraLifePlus containers

The bale stack pallets load correctly, but there is currently no support for these individual bales:

• Eifelheu/squarebale80.i3d
• Hartog/CompactGras/squarebale80.i3d
• Hartog/CompactLuzerne/squarebale80.i3d
• NATUREgreen/small/squarebale80.i3d
• NATUREgreen/mid/squarebale80_2Ng.i3d
• NATUREgreen/large/squarebale120Ng.i3d

TODO: check sizes for KRONE/CLAAS/HESSTON bales

v1.6.0.3

Fix for Bug #242

Protect against using 'requiresMore' function when fillType is not supported by the mixer wagon - i.e. filltype does not exist in the spec_mixerWagon.fillTypeToMixerWagonFillType table

v1.6.0.2

Fix for forklift issue raised in bug #241

• Prevent any altered mixing logic for bales that are mounted on another vehicle (e.g. forklift, wheel loader, etc).

v1.6.0.1

Fix for issue raised in bug #241

• Fix to allow processing for a single filltype, up to the maximum allowed for that filltype
• Will consider options to exceed limit when required

v1.6.0.0 - MODHUB

v1.6.0.0 - MODHUB Release

• Added support for STRAW BLOWERS and TMR MIXER WAGONS
• Fix logic for loading with doors and curtains open/closed
• Fix issue with "Straw Harvest Pack" after update 1.1.0.0
• Workaround for unloading to buildings with the object storage specialisation
• Prevent manual loading while bale collection mode is active
• Fix for issue where unload did not work correctly in conjunction with manual loading

v1.5.2.2

Fix for issue #237

• Fix for issue where unload did not work correctly in conjunction with manual loading

Sorry, I made this fix last month and totally forgot to release it!

v1.5.2.1

Added support for STRAW BLOWERS and TMR MIXER WAGONS

• KUHN RA 142
• KUHN PRIMOR 15070 M
• SILOKING TrailedLine 4.0 Premium 2218‑22
• FARESIN PF 2.24 Plus
• Anderson Group PRO-CHOP 150

NOTES:

• Straw Blowers cannot be unloaded (using UAL)
• TMR Mixers will automatically maintain the correct ratios

v1.5.2.0

Do not use this one, see latest

v1.5.1.8

Another tweak for #235

Triggers seem to mis-fire when they are too close. It gets worse when they overlap, and better if further apart.
Side loading triggers are now shortened by 15% when a front or rear loading trigger exists to hopefully improve this..