Add manual security group handling and expose SG ID

docs/data-sources/loadbalancer.md

@@ -33,13 +33,15 @@ data "stackit_loadbalancer" "example" {
 
 ### Read-Only
 
+- `disable_security_group_assignment` (Boolean) If set to true, this will disable the automatic assignment of a security group to the load balancer's targets. This option is primarily used to allow targets that are not within the load balancer's own network or SNA. When this is enabled, you are fully responsible for ensuring network connectivity to the targets, including managing all routing and security group rules manually. This setting cannot be changed after the load balancer is created.
 - `external_address` (String) External Load Balancer IP address where this Load Balancer is exposed.
 - `id` (String) Terraform's internal resource ID. It is structured as "`project_id`","region","`name`".
 - `listeners` (Attributes List) List of all listeners which will accept traffic. Limited to 20. (see [below for nested schema](#nestedatt--listeners))
 - `networks` (Attributes List) List of networks that listeners and targets reside in. (see [below for nested schema](#nestedatt--networks))
 - `options` (Attributes) Defines any optional functionality you want to have enabled on your load balancer. (see [below for nested schema](#nestedatt--options))
 - `plan_id` (String) The service plan ID. If not defined, the default service plan is `p10`. Possible values are: `p10`, `p50`, `p250`, `p750`.
 - `private_address` (String) Transient private Load Balancer IP address. It can change any time.
+- `security_group_id` (String) The ID of the egress security group assigned to the Load Balancer's internal machines. This ID is essential for allowing traffic from the Load Balancer to targets in different networks or STACKIT NETWORK AREAS (SNA). To enable this, create a security group rule for your target VMs and set the `remote_security_group_id` of that rule to this value. This is typically used when `disable_security_group_assignment` is set to `true`.
 - `target_pools` (Attributes List) List of all target pools which will be used in the Load Balancer. Limited to 20. (see [below for nested schema](#nestedatt--target_pools))
 
 <a id="nestedatt--listeners"></a>

docs/resources/loadbalancer.md

@@ -110,6 +110,108 @@ resource "stackit_loadbalancer" "example" {
   }
 }
 
+# This example demonstrates an advanced setup where the Load Balancer is in one
+# network and the target server is in another. This requires manual
+# security group configuration using the `disable_security_group_assignment`
+# and `security_group_id` attributes.
+
+# We create two separate networks: one for the load balancer and one for the target.
+resource "stackit_network" "lb_network" {
+  project_id       = "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"
+  name             = "lb-network-example"
+  ipv4_prefix      = "192.168.1.0/24"
+  ipv4_nameservers = ["8.8.8.8"]
+}
+
+resource "stackit_network" "target_network" {
+  project_id       = "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"
+  name             = "target-network-example"
+  ipv4_prefix      = "192.168.2.0/24"
+  ipv4_nameservers = ["8.8.8.8"]
+}
+
+resource "stackit_public_ip" "example" {
+  project_id = "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"
+}
+
+resource "stackit_loadbalancer" "example" {
+  project_id       = "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"
+  name             = "example-advanced-lb"
+  external_address = stackit_public_ip.example.ip
+
+  # Key setting for manual mode: disables automatic security group handling.
+  disable_security_group_assignment = true
+
+  networks = [{
+    network_id = stackit_network.lb_network.network_id
+    role       = "ROLE_LISTENERS_AND_TARGETS"
+  }]
+
+  listeners = [{
+    port        = 80
+    protocol    = "PROTOCOL_TCP"
+    target_pool = "cross-network-pool"
+  }]
+
+  target_pools = [{
+    name        = "cross-network-pool"
+    target_port = 80
+    targets = [{
+      display_name = stackit_server.example.name
+      ip           = stackit_network_interface.nic.ipv4
+    }]
+  }]
+}
+
+# Create a new security group to be assigned to the target server.
+resource "stackit_security_group" "target_sg" {
+  project_id  = "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"
+  name        = "target-sg-for-lb-access"
+  description = "Allows ingress traffic from the example load balancer."
+}
+
+# Create a rule to allow traffic FROM the load balancer.
+# This rule uses the computed `security_group_id` of the load balancer.
+resource "stackit_security_group_rule" "allow_lb_ingress" {
+  project_id        = "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"
+  security_group_id = stackit_security_group.target_sg.security_group_id
+  direction         = "ingress"
+  protocol = {
+    name = "tcp"
+  }
+
+  # This is the crucial link: it allows traffic from the LB's security group.
+  remote_security_group_id = stackit_loadbalancer.example.security_group_id
+
+  port_range = {
+    min = 80
+    max = 80
+  }
+}
+
+resource "stackit_server" "example" {
+  project_id        = "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"
+  name              = "example-remote-target"
+  machine_type      = "c1.1"
+  availability_zone = "eu01-1"
+
+  boot_volume = {
+    source_type = "image"
+    source_id   = "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"
+    size        = 10
+  }
+
+  network_interfaces = [
+    stackit_network_interface.nic.network_interface_id
+  ]
+}
+
+resource "stackit_network_interface" "nic" {
+  project_id         = var.project_id
+  network_id         = stackit_network.target_network.network_id
+  security_group_ids = [stackit_security_group.target_sg.security_group_id]
+}
+
 # Only use the import statement, if you want to import an existing loadbalancer
 import {
   to = stackit_loadbalancer.import-example
@@ -130,6 +232,7 @@ import {
 
 ### Optional
 
+- `disable_security_group_assignment` (Boolean) If set to true, this will disable the automatic assignment of a security group to the load balancer's targets. This option is primarily used to allow targets that are not within the load balancer's own network or SNA. When this is enabled, you are fully responsible for ensuring network connectivity to the targets, including managing all routing and security group rules manually. This setting cannot be changed after the load balancer is created.
 - `external_address` (String) External Load Balancer IP address where this Load Balancer is exposed.
 - `options` (Attributes) Defines any optional functionality you want to have enabled on your load balancer. (see [below for nested schema](#nestedatt--options))
 - `plan_id` (String) The service plan ID. If not defined, the default service plan is `p10`. Possible values are: `p10`, `p50`, `p250`, `p750`.
@@ -139,6 +242,7 @@ import {
 
 - `id` (String) Terraform's internal resource ID. It is structured as "`project_id`","region","`name`".
 - `private_address` (String) Transient private Load Balancer IP address. It can change any time.
+- `security_group_id` (String) The ID of the egress security group assigned to the Load Balancer's internal machines. This ID is essential for allowing traffic from the Load Balancer to targets in different networks or STACKIT NETWORK AREAS (SNA). To enable this, create a security group rule for your target VMs and set the `remote_security_group_id` of that rule to this value. This is typically used when `disable_security_group_assignment` is set to `true`.
 
 <a id="nestedatt--listeners"></a>
 ### Nested Schema for `listeners`

examples/resources/stackit_loadbalancer/resource.tf

@@ -91,6 +91,108 @@ resource "stackit_loadbalancer" "example" {
   }
 }
 
+# This example demonstrates an advanced setup where the Load Balancer is in one
+# network and the target server is in another. This requires manual
+# security group configuration using the `disable_security_group_assignment`
+# and `security_group_id` attributes.
+
+# We create two separate networks: one for the load balancer and one for the target.
+resource "stackit_network" "lb_network" {
+  project_id       = "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"
+  name             = "lb-network-example"
+  ipv4_prefix      = "192.168.1.0/24"
+  ipv4_nameservers = ["8.8.8.8"]
+}
+
+resource "stackit_network" "target_network" {
+  project_id       = "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"
+  name             = "target-network-example"
+  ipv4_prefix      = "192.168.2.0/24"
+  ipv4_nameservers = ["8.8.8.8"]
+}
+
+resource "stackit_public_ip" "example" {
+  project_id = "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"
+}
+
+resource "stackit_loadbalancer" "example" {
+  project_id       = "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"
+  name             = "example-advanced-lb"
+  external_address = stackit_public_ip.example.ip
+
+  # Key setting for manual mode: disables automatic security group handling.
+  disable_security_group_assignment = true
+
+  networks = [{
+    network_id = stackit_network.lb_network.network_id
+    role       = "ROLE_LISTENERS_AND_TARGETS"
+  }]
+
+  listeners = [{
+    port        = 80
+    protocol    = "PROTOCOL_TCP"
+    target_pool = "cross-network-pool"
+  }]
+
+  target_pools = [{
+    name        = "cross-network-pool"
+    target_port = 80
+    targets = [{
+      display_name = stackit_server.example.name
+      ip           = stackit_network_interface.nic.ipv4
+    }]
+  }]
+}
+
+# Create a new security group to be assigned to the target server.
+resource "stackit_security_group" "target_sg" {
+  project_id  = "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"
+  name        = "target-sg-for-lb-access"
+  description = "Allows ingress traffic from the example load balancer."
+}
+
+# Create a rule to allow traffic FROM the load balancer.
+# This rule uses the computed `security_group_id` of the load balancer.
+resource "stackit_security_group_rule" "allow_lb_ingress" {
+  project_id        = "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"
+  security_group_id = stackit_security_group.target_sg.security_group_id
+  direction         = "ingress"
+  protocol = {
+    name = "tcp"
+  }
+
+  # This is the crucial link: it allows traffic from the LB's security group.
+  remote_security_group_id = stackit_loadbalancer.example.security_group_id
+
+  port_range = {
+    min = 80
+    max = 80
+  }
+}
+
+resource "stackit_server" "example" {
+  project_id        = "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"
+  name              = "example-remote-target"
+  machine_type      = "c1.1"
+  availability_zone = "eu01-1"
+
+  boot_volume = {
+    source_type = "image"
+    source_id   = "xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx"
+    size        = 10
+  }
+
+  network_interfaces = [
+    stackit_network_interface.nic.network_interface_id
+  ]
+}
+
+resource "stackit_network_interface" "nic" {
+  project_id         = var.project_id
+  network_id         = stackit_network.target_network.network_id
+  security_group_ids = [stackit_security_group.target_sg.security_group_id]
+}
+
 # Only use the import statement, if you want to import an existing loadbalancer
 import {
   to = stackit_loadbalancer.import-example

stackit/internal/services/loadbalancer/loadbalancer/datasource.go

@@ -69,6 +69,8 @@ func (r *loadBalancerDataSource) Schema(_ context.Context, _ datasource.SchemaRe
 		"id":                                    "Terraform's internal resource ID. It is structured as \"`project_id`\",\"region\",\"`name`\".",
 		"project_id":                            "STACKIT project ID to which the Load Balancer is associated.",
 		"external_address":                      "External Load Balancer IP address where this Load Balancer is exposed.",
+		"disable_security_group_assignment":     "If set to true, this will disable the automatic assignment of a security group to the load balancer's targets. This option is primarily used to allow targets that are not within the load balancer's own network or SNA. When this is enabled, you are fully responsible for ensuring network connectivity to the targets, including managing all routing and security group rules manually. This setting cannot be changed after the load balancer is created.",
+		"security_group_id":                     "The ID of the egress security group assigned to the Load Balancer's internal machines. This ID is essential for allowing traffic from the Load Balancer to targets in different networks or STACKIT NETWORK AREAS (SNA). To enable this, create a security group rule for your target VMs and set the `remote_security_group_id` of that rule to this value. This is typically used when `disable_security_group_assignment` is set to `true`.",
 		"listeners":                             "List of all listeners which will accept traffic. Limited to 20.",
 		"port":                                  "Port number where we listen for traffic.",
 		"protocol":                              "Protocol is the highest network protocol we understand to load balance.",
@@ -125,6 +127,10 @@ func (r *loadBalancerDataSource) Schema(_ context.Context, _ datasource.SchemaRe
 				Description: descriptions["external_address"],
 				Computed:    true,
 			},
+			"disable_security_group_assignment": schema.BoolAttribute{
+				Description: descriptions["disable_security_group_assignment"],
+				Computed:    true,
+			},
 			"plan_id": schema.StringAttribute{
 				Description: descriptions["plan_id"],
 				Computed:    true,
@@ -339,6 +345,10 @@ func (r *loadBalancerDataSource) Schema(_ context.Context, _ datasource.SchemaRe
 				Optional:    true,
 				Description: descriptions["region"],
 			},
+			"security_group_id": schema.StringAttribute{
+				Description: descriptions["security_group_id"],
+				Computed:    true,
+			},
 		},
 	}
 }